Induction Disc Type Relay (Shaded Pole Structure)

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ย. 2020
  • Hi
    I am Md Irfan Ahmed. Welcome to our TH-cam Channel Basic electrical.
    About this video:-
    It consists of an aluminium disc which is free to rotate in an air gap of an electromagnet.The part of pole face of each pole is shaded with the help of copper band or ring.This is called shading ring.The total flux φ produced due to the alternating current split into two fluxes displaced in time and space due to the shading ring.
    Due to the alternating flux, e.m.f gets induced in the shading ring.This e.m.f drives the currents causing the flux to exist in shaded portion.This flux lags behind the flux in the unshaded portion by angle ∝.
    Let φs = Flux in shaded portion
    φu = Flux in unshaded portion
    Es = E.M.F. induced in the disc due to φs
    Eu = E.M.F. induced in the disc due to φu
    Is = Induced current due to Es
    Iu = Induced current due to Eu
    Eu lags behind φu by 90° while Es lags behind φs by 90°.The current Is lags Es by small angle β while Iu lags Eu by small angle β.This angle is generally neglected and Is and Iu are assumed to be in phase with Es and Eu respectively, in practice.The phasor diagram is shown in the figure below.
    As proved in the previous section, neglecting It we get,
    T ∝ φs φu sin ∝ (where T = Torque )
    Telegram channel Basic Electrical
    t.me/basic_Electrical
    Instagram Channel Basic Electrical basicelectrical...
    If anyone wants to donate me some amount for my work, then details given below.
    Phonepe- 8294759336
    Google Pay- 8294759336
    ‪@BasicElectricals‬
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 10

  • @vasavaparimal7137
    @vasavaparimal7137 3 ปีที่แล้ว +1

    nice explanation sir

  • @surendrakverma555
    @surendrakverma555 3 ปีที่แล้ว

    Very good lecture. Thanks

  • @ssb9892
    @ssb9892 3 ปีที่แล้ว +3

    to disc rotate hone s ckt ko kaise isolate kr rha h relay y to batao

  • @rohitsaini42926
    @rohitsaini42926 3 ปีที่แล้ว +1

    Tx 😊

  • @pulkitkhanna3447
    @pulkitkhanna3447 2 ปีที่แล้ว +1

    Well explained bro 🔥

  • @sewarammasram2214
    @sewarammasram2214 3 ปีที่แล้ว +1

    सर जी नमस्कार टाइमर से कैसे कनेक्शन करें कि हर 10मिनट में हमारा पंप चले वो भी सिर्फ 2मिनट चले और बंद हो जाय फिर 10मिनट बाद चालू हो और 2मिनट तक चले ये प़क़िया कंटीन्यू चलना चाहिए इसके बारे में वीडियो बनाइए सर जी । इसमें एक डिस्क टाईप रिले होता है जो घूमता रहता है ।