Hi, I used three clamps and had the bike on a paddock stand but you could probably get away with two decent clamps and leaving the bike on the side stand👍
I know this is years old but you should really keep pumping until u hear a pop I used to work at cycle gear and we get the most tires out of anyone and we ALWAYS waited till the pop to make sure it’s fully beaded. If your worried about blowing up the tire it’s damn near impossible unless you pump an overtly ridiculous amount of pressure but those tires can handle like 130 psi easy don’t ride on it lmao but just to get it to bead. I’m wondering did you have any problems with this tire after?
Hi, it seated correctly and gave no wobbles or shakes. These days I put loads of tyre soap on so it slips into place with that reassuring ‘pop’. Thanks for watching and commenting 🙏
Followed vldeo front wheel honda st1100 change valve but tyre still deformed as was before removing clams all on one side but 10 percent tyre not sit back not taking air any ideas tips please?
Hi, I’d try putting lots of soap on the unseated part, both on the tyre and the rim, and while blowing it up hit the unseated part of the tyre hard with a hammer on it’s crown part. If the wheel is off the bike keep banging the unseated part of the tyre into the ground, still while your air line is attached and you are blowing the tyre up. Hopefully the banging will seal enough for the air to push out the tyre. Good luck 🤞 This guys got some other ideas to try:- th-cam.com/video/I24NlAhaZZ0/w-d-xo.html
@@bikerantics5001 Thanks for reply wheel still on bike honda st1100 looking from front at bike all good left of tyre right side 80% seated looks like the beading inside far side or rim very tight
@@brocky78 try hitting the unseated portion on the crown of the tyre hard with a hammer, after soaping it up, whilst filling with air should just get enough of a seal for the air to push it out. Careful not to hit the wheel! Good luck 🤞
P. S be sure to put a coat of Xtra-Seal - Bead Sealer on both sides of the rim. You want a leak free wheels during your ride. P. S could you please record when you fill up at a gas station and when you buy English snacks and cheese.thanks . God bless you & king Charles 3.
Excellent sentence, very descriptive, well done 😂 Using an educated guess the ‘it’ you’re referring to in your statement is about clamping the tyre. So your sentence should read ‘We saw nothing of how you clamped the tyre out of the way. DUH.’ The reason you’re the only one saying this is because you lack the necessary brain cells to do the job. If you were indeed smart enough it would be clear that I let the air out of the tyre then used some clamps to hold the tyre out of the way. I’m sorry I credited my audience with an amount of intelligence to realise this. Now wipe the dribble off your chin and go get breast fed elsewhere 🙏
@biker antics how many clamps do you need and do you have to have motorcycle stands
Hi, I used three clamps and had the bike on a paddock stand but you could probably get away with two decent clamps and leaving the bike on the side stand👍
I know this is years old but you should really keep pumping until u hear a pop I used to work at cycle gear and we get the most tires out of anyone and we ALWAYS waited till the pop to make sure it’s fully beaded. If your worried about blowing up the tire it’s damn near impossible unless you pump an overtly ridiculous amount of pressure but those tires can handle like 130 psi easy don’t ride on it lmao but just to get it to bead. I’m wondering did you have any problems with this tire after?
Hi, it seated correctly and gave no wobbles or shakes. These days I put loads of tyre soap on so it slips into place with that reassuring ‘pop’. Thanks for watching and commenting 🙏
Followed vldeo front wheel honda st1100 change valve but tyre still deformed as was before removing clams all on one side but 10 percent tyre not sit back not taking air any ideas tips please?
Hi, I’d try putting lots of soap on the unseated part, both on the tyre and the rim, and while blowing it up hit the unseated part of the tyre hard with a hammer on it’s crown part. If the wheel is off the bike keep banging the unseated part of the tyre into the ground, still while your air line is attached and you are blowing the tyre up. Hopefully the banging will seal enough for the air to push out the tyre. Good luck 🤞
This guys got some other ideas to try:-
th-cam.com/video/I24NlAhaZZ0/w-d-xo.html
@@bikerantics5001 Thanks for reply wheel still on bike honda st1100 looking from front at bike all good left of tyre right side 80% seated looks like the beading inside far side or rim very tight
@@brocky78 try hitting the unseated portion on the crown of the tyre hard with a hammer, after soaping it up, whilst filling with air should just get enough of a seal for the air to push it out. Careful not to hit the wheel! Good luck 🤞
@@bikerantics5001 ok will try in the Morning am Ireland , thanks again God Bless 🙏
Hi handsome, great video. Produce more videos and kids. Have a safe motorcycle ride.
P. S be sure to put a coat of Xtra-Seal - Bead Sealer on both sides of the rim. You want a leak free wheels during your ride. P. S could you please record when you fill up at a gas station and when you buy English snacks and cheese.thanks . God bless you & king Charles 3.
We saw nothing how you did it with the tire. DUH.
Excellent sentence, very descriptive, well done 😂
Using an educated guess the ‘it’ you’re referring to in your statement is about clamping the tyre. So your sentence should read ‘We saw nothing of how you clamped the tyre out of the way. DUH.’ The reason you’re the only one saying this is because you lack the necessary brain cells to do the job. If you were indeed smart enough it would be clear that I let the air out of the tyre then used some clamps to hold the tyre out of the way. I’m sorry I credited my audience with an amount of intelligence to realise this. Now wipe the dribble off your chin and go get breast fed elsewhere 🙏
Trusty what ? What is that ?
It’s a tool you screw on to the thread of the new valve to make it easy to pull it into place 👍
Good job - just a thought - do you think you might get some extra views if re title it "spit test"? ;0) Thanks for sharing matey!
Just try ‘it’ without some spit 🤪