Thanks brother fix my truck very good video change Theo ring from harbor freight Spend $60 on everything paperclip is the best tool same me lots of money
Hey Richard I saw your video yesterday, I've been having a air leak at the manifold from the firewall side ( engine side ) and it was a green fitting I pulled the hose out cut it with a pvc cutting tool make clean cuts pop it back and still leaked so I did the paperclip (NASA) Design and pulled the green Oring got a set of green O rings from HF and boom worked just ad you said , thank you for this info , it's great that you took the time to figure this out sir , God bless
Thank you for your blessing. I'm struggling a bit in my life and am grateful for it. I'm sorry the video is of such poor quality. I made it to help my fellow truckers like you. It makes me happy to know you were able to fix your truck. May God's blessings be upon you.
Thanks a lot for making this vide. I appreciate it sir. Was having this issue and was thinking of replacing the whole part. Thanks a lot. Saved a lot of money.
Thank you so much for the video, it saved me alot of time and money. I actually had a new plastic straight union with brass ends that I robbed to oring out of to fix my pass thru. So if you have any unions with brass ends you can rob parts from those.
Great explanation on how to fix it, I will try on my Volvo this weekend I was just wondering how much on laybor the mechanic would charge me to replace the whole thing, now I can afford to fix it lol. Thanks for the great help
Of course, the shop wants you to buy expensive parts & charge multiple hours for labor instead of taking 30 minutes to tear down & replace a $0.30 seal.
I have a 2016 prostar while moving the tandems on old trailer and arguing with guys at shipping I forgot and left my trailer break down. So pushed in both buttons and pressed to go back and back until all is a sudden I heard they air leak and saw trailer handle down. So now I’m stuck. The one that is leaking looks like the big black one it’s the main air for trailer. So as soon as I press in the trailer button and press on break it leaks. Front valve is almost 700 some say it can be a break chamber which are new but doubt it since when I run bobtail there’s no leak. And break is firm , so worried it’s the one in by the fifth wheel sending back air or if it’s the air valve from the front. It is screwed in. Do I think it can be fixed like this?
It can be done while still on the truck. My daughter helped me because she has long skinny arms. The little hooks I made out of paper clips worked the best. May God bless you with success.
@Richard Jolley not to worry my friend i applaud your effort. If you turn on the $thanks feature we can all pitch in for your production equipment. We can all help out the community, channels like yours.
Does anybody know what size these o rings are? Or do you use same size as the air hose? I got a leak on the one that takes 3/8 hose. Does that mean It takes 3/8 o ring???
o-rings have multiple dimensions, and durometers (hardness), also materials. Get a digital caliper and find the one you need exactly at McMaster-carr. You can try a hardware store but you need ID and OD measurements in thousandths.
A truck stop, just try to saw me. A whole fitting like this. Then I went to the parking lot. Took the green o-ring out, went back inside the truck. Stop and said can I buy this o? Ring, they said we don't carry those. We would have to order it. 😂😂😂
Buy an O ring kit from Harbour Frieght or something. You can unhook another hose of the same diameter and match them up. If the old Oring breaks, keep all the pieces and lay them together. God bless you.
Yes,you are absolutely correct. I apologize for the poor quality. But I was so excited about fixing this for a few cents, I couldn't wait to show others and try to save them big bucks. May God bless you.
why is it such a crappy design on all those trucks ,seems like a mayor point of failure. Why don't they just run the tubes thru a rubber grommet with individual fittings
Wish there was a way to repair the plastic ones, they obviously implemented obsolescence to control you and take all your money. I invested in some brass pre-bidenflation and never knew they even had O-rings, Thanks! 👍
Thanks I just can’t stop laughing dude in between getting dizzy spinning around with you trying to locate the air fitting hole with the poor lighting it was hard and forcing my eyes to focus also did you shove something in your mouth because whatever you did it really muffled your speech making it very hard not only to watch bad lights and the spinning around but making out what you where saying didn’t you watched this video before posting it?? Needs a redo but man did you make me laugh thanks. Anyways sorry somewhere in this video there’s a important lesson…somewhere thanks for trying lol
Your absolutely correct. One of the worst videos ever. But this repair saved me over $500.00. I was so excited I immediately made this to try and help others. God bless you , and thanks for your good sense of humor.
@@richardjolley6244 I don't know why TH-cam didn't show me this GREAT VIDEO 2 days ago. 11/05/22 I paid $180 with tax for the air manifold. My son and I installed. And I tried to make a video to help others but it's very difficult with one hand, the wind,light... SO, PLEASE! KEEP MAKING MORE VIDEOS, Maybe next time I will save some money or maybe I'm going to pick up the old one from the garage, if still there and fix it. You got my thumbs up/like. God bless you brother Richard.
All the colored ends can be removed and the oring under them replaced. The tools made out of paper clips work best. Especially if the old oring is broken in pieces. I hope this helps and may God bless you.
Thanks brother fix my truck very good video change Theo ring from harbor freight
Spend $60 on everything paperclip is the best tool same me lots of money
I'm so glad it worked for you! May God bless you.
Hey I bought 3 oring kits from there and tried tried to fix it, but seemed to make it leak more. Did it work?
Wow, I just bought the manifold and this is exactly what's wrong with my cascadia. Thank you, you just got another subscriber
Thank you Rich!! Very helpful!!!
Thank you driver. I got to Home Depot today, I had to perchas defferen O-RINGS, like of 1/4 size. But I see at your video it is smaller O-RINGS
Don't swallow the light or later on you'll be shitting sparks.
Great video!
Thank You.
The crap you say! LOL
Ive got a small leak on mine..will have to give it a go..thanks for the info
You are a big help. Answered all my questions regarding my truck air fittings. Thank you
Hey Richard I saw your video yesterday, I've been having a air leak at the manifold from the firewall side ( engine side ) and it was a green fitting I pulled the hose out cut it with a pvc cutting tool make clean cuts pop it back and still leaked so I did the paperclip (NASA)
Design and pulled the green Oring got a set of green O rings from HF and boom worked just ad you said , thank you for this info , it's great that you took the time to figure this out sir , God bless
Thank you for your blessing. I'm struggling a bit in my life and am grateful for it. I'm sorry the video is of such poor quality. I made it to help my fellow truckers like you. It makes me happy to know you were able to fix your truck. May God's blessings be upon you.
Very good video!
I just fixed air leak on my cascadia same way 👍thank you!
Where did you get them? Harbor freight orings didnt work for me
Thank you very much,I just bought the part and took the ring with a paper clip,THANK YOU it works people
Thank you for this video. I have that exact issue with my 03 sterling. Gonna make that repair today.
God bless you.
Interesting 🤔
That is priceless information right there I was about to spend $250.00 and a lot of labor. Good job on the explanation! 😀😀
Now I know what to replace if air leaks in air manifold. very helpful video. Thank you Sir… 🙏
You're sure welcome, and may God bless you.
Thanks a lot for making this vide. I appreciate it sir. Was having this issue and was thinking of replacing the whole part. Thanks a lot. Saved a lot of money.
God bless you.
Thank you so much for the video, it saved me alot of time and money. I actually had a new plastic straight union with brass ends that I robbed to oring out of to fix my pass thru. So if you have any unions with brass ends you can rob parts from those.
Good thinking!
Great explanation on how to fix it, I will try on my Volvo this weekend I was just wondering how much on laybor the mechanic would charge me to replace the whole thing, now I can afford to fix it lol. Thanks for the great help
May God bless you. The paper clip hooks I made worked the best.
I have a same truck and same issue, I'll try it thank you for the helpful video.
You're welcome, May God bless you.
Your video helped me a lot Big thanks
God bless you.
Very useful information, thanks for sharing ❤👍👍👍
Thanks saved me a lot
Of course, the shop wants you to buy expensive parts & charge multiple hours for labor instead of taking 30 minutes to tear down & replace a $0.30 seal.
You're the jam. Thanks a bunch!!!
Glad To help. God bless you!
@@richardjolley6244 Thanks Buddy!! God Bless You Too!!! :D
Thank you my friend. Very helpful for me your video. Thank you so much.
You are very kind. I know the video isn't very good. But I wanted to help everyone save time and money. May God bless you.
I have the same problem hopefully it works thank you for the video
You're welcome, may God bless you.
Thank you for video I am going to try it tomorrow after work
Did it work? Were you able to fix it? May God bless you.
Are the harbor freight oring kits sufficient for this repair?
Very helpful, thank you so much for the video. God bless you sir!
May God bless you too.
Thanks for the video, it’s very helpful
You're very welcome. May God bless you.
Awesome mine has been leaking for a while now I can fix it 👍🏻
I have a 2016 prostar while moving the tandems on old trailer and arguing with guys at shipping I forgot and left my trailer break down. So pushed in both buttons and pressed to go back and back until all is a sudden I heard they air leak and saw trailer handle down. So now I’m stuck. The one that is leaking looks like the big black one it’s the main air for trailer. So as soon as I press in the trailer button and press on break it leaks. Front valve is almost 700 some say it can be a break chamber which are new but doubt it since when I run bobtail there’s no leak. And break is firm , so worried it’s the one in by the fifth wheel sending back air or if it’s the air valve from the front. It is screwed in. Do I think it can be fixed like this?
Can this be done while the manifold is still on the truck or do I have to remove the whole manifold to change out the oring
It can be done while still on the truck. My daughter helped me because she has long skinny arms. The little hooks I made out of paper clips worked the best. May God bless you with success.
Louis
Very helpful
I'm glad you found it useful. May God bless you.
Thanks a lot. Man you can really use a camera/cell phone tripod with light for your videos. Other than that looks like you saving a lot of money.
I'm glad you approve! Only kidding friend. I know it's a poor quality video, and I'm sorry for that. Hope it helped you somehow. God bless you.
@Richard Jolley not to worry my friend i applaud your effort. If you turn on the $thanks feature we can all pitch in for your production equipment. We can all help out the community, channels like yours.
I don't know how to turn it on! LOL!
Does anybody know what size these o rings are? Or do you use same size as the air hose? I got a leak on the one that takes 3/8 hose. Does that mean It takes 3/8 o ring???
o-rings have multiple dimensions, and durometers (hardness), also materials.
Get a digital caliper and find the one you need exactly at McMaster-carr. You can try a hardware store but you need ID and OD measurements in thousandths.
Great video bro👍👍
Thank you
Old video but can you tell me if the yellow small ones have a 0-ring?
Mine do.
What size is the o ring TIA‼️
Thanks
A truck stop, just try to saw me. A whole fitting like this. Then I went to the parking lot. Took the green o-ring out, went back inside the truck. Stop and said can I buy this o? Ring, they said we don't carry those. We would have to order it. 😂😂😂
Thanks!!!
God bless you.
What size o ring is it?
Depends on which one you are replacing. Pull the old one out and match it at the hardware store.
@@richardjolley6244 My old O ring came out in bits and pieces so I have nothing to match to
Buy an O ring kit from Harbour Frieght or something. You can unhook another hose of the same diameter and match them up. If the old Oring breaks, keep all the pieces and lay them together. God bless you.
@@richardjolley6244 thanks!
Very good sir
Very useful info.
🙏🙏
Hope it helps you. May God bless you.
Might help me out, thanks!!
what sizs o rings ?
Awesome , Thank you
You are welcome. May God bless you.
what the name of the ring how to get it how to get right o ring
I think the o-ring is 3/8 of an inch.
i mean i see alot of o ring kits on ebay amazon , its need specific o ring type
NICE, THANK YOU FOR SHARE
Hello sir! Do you know where I can buy brass color for air manifold ?
I'm sorry, I dont.
Good video
Thank you for your kindness. I hope it helped you.
From where I get the o rings.
I got mine from a hardware store.
Thank you sir
You are most welcome. May God bless you.
Thank you
Hope this help you. God bless you.
Works well thanks
It didn't work for me. Still had air leaks, but I bought all the oring kits from harbor freight.
Thanks sr.
You're welcome. May God bless you.
Very helpful. Very difficult to watch though. Camera angles weren't so great.
Yes,you are absolutely correct. I apologize for the poor quality. But I was so excited about fixing this for a few cents, I couldn't wait to show others and try to save them big bucks. May God bless you.
thanks alot
Thanks u save me sum money
Thays ok as long as the pladtic manifold piece isnt cracked like mine was
Wow
👍👍👍👍👏👏👏
God bless you this video help me alot thank you SIR
You are very welcome, and thank you for the blessing.
I just replaced it by myself. Paid for the parts $260
Thinks
why is it such a crappy design on all those trucks ,seems like a mayor point of failure.
Why don't they just run the tubes thru a rubber grommet with individual fittings
Wish there was a way to repair the plastic ones, they obviously implemented obsolescence to control you and take all your money. I invested in some brass pre-bidenflation and never knew they even had O-rings, Thanks! 👍
Thanks I just can’t stop laughing dude in between getting dizzy spinning around with you trying to locate the air fitting hole with the poor lighting it was hard and forcing my eyes to focus also did you shove something in your mouth because whatever you did it really muffled your speech making it very hard not only to watch bad lights and the spinning around but making out what you where saying didn’t you watched this video before posting it?? Needs a redo but man did you make me laugh thanks. Anyways sorry somewhere in this video there’s a important lesson…somewhere thanks for trying lol
Your absolutely correct. One of the worst videos ever. But this repair saved me over $500.00. I was so excited I immediately made this to try and help others. God bless you , and thanks for your good sense of humor.
@@richardjolley6244 I don't know why TH-cam didn't show me this GREAT VIDEO 2 days ago.
11/05/22 I paid $180 with tax for the air manifold. My son and I installed.
And I tried to make a video to help others but it's very difficult with one hand, the wind,light...
SO, PLEASE! KEEP MAKING MORE VIDEOS, Maybe next time I will save some money or maybe I'm going to pick up the old one from the garage, if still there and fix it. You got my thumbs up/like.
God bless you brother Richard.
A $200 plastic part 〽️😒📉
777th like
Hi Richard in regards with that green little plastic and I believe that goes to primary gauge. Is that repairable as well?
I'm not sure what green plastic thing you are referring to. Please help me understand.
All the colored ends can be removed and the oring under them replaced. The tools made out of paper clips work best. Especially if the old oring is broken in pieces. I hope this helps and may God bless you.
@@richardjolley6244 thank you for your reply. Appreciate it.
What’s size o ring is that?
Thanks
Thanks