Lol but you cant use it for other things because it’s prohibited 😂 even tho attachments exist its still prohibited 🚫 ✋ 😂 so do not try this at home kids make sure you waste more money and buy the proper tool instead of jus getting an adapter ok kids dont be an idiot like the guy in the video always get the right tool for the job 😂🙄 and never improvise either cus apparently you look like an idiot when you improvise 😭 (i dont know why, but i feel like i have to mention , all that was sarcasm)
I take my comment back but semi stand by it so il leave it posted but the reason i say i kinda take it back is because i broke the drill bit for a second time today the DCF850 is too strong and breaks the hex shaft if the nut or bolt is torqued to tight or seized but i guess you kinda right cus the limiting factor is the hex shaft , but honestly dont know how the 1/2 inch drill with hold up vs a seized nut or bolt
@@TheAceAtGames true true especially when working on German cars like the tightly packed engine bays of these audi’s are a nightmare, but i already had the dcf850 and just now getting more into cars mechanically so hada give the adapter a try since i had the dcf850 already 🤗 works but not as versatile as the proper size half inch impact like the dcf921/dcf922/dcf901/dcf913 that already have/come with that 3/8inch attachment head
@@MINUSKAIRA hi, yes I do that a lot when I hang cabinets on concrete walls I drill a pilot hole with my dcf850 it’s awesome for that with 1-3/4” concrete hex fasteners,
Here's the thing... you wouldn't go at that with a ¼" drive ratchet, so a ¼" driver isn't gonna be big enough for the job. You might be able to get it with the ⅜" drive, but i would recommend ½" drive to be sure.
True but dcf921 would have failed too but only because this axle nut was siezed on there good. I know this because i tried to remove it with a breaker bar and the breaker bar broke. You can check out the breaker bar update here th-cam.com/users/shortsIOxM5ejd4bQ?feature=share dcf850 would have taken care of this axle nut if it wasnt siezed cuz trust me its small but it aint no joke its TRUELY A TOOL FOR PROS
Вот,что ждет людей,которые гонятся за мощностью и используют инструмент не по назначению,у кого конечно денег девать некуда,думаю могут себе позволить эту бессмысленную трату денег на оснастку,но компания девольт не остановилась на достигнутом и решила,что крутящего момента в 206Нм ей мало и они решили выпустить новый импакт модель 860 с круиящим моментом 282Нм,теперь те кому денег девать некуда могут их спокойно спускать на оснастку,а умные люди,просто возьмут в руки гайковерт и сделают свою работу без вреда для своего бюджета и инструмента,всем благ,девольт молодец,теперь надо выпустить импакт на 500Нм,ну а умные конкуренты в лице милки и других я думаю долго ждать не предется!!!
I know thats the big boy 💪 but honestly this nut was on there good my breaker bar even broke check it out on this update with the breaker bar failing too😭💔 th-cam.com/users/shortsIOxM5ejd4bQ?feature=share
@@silversurfer806 on this axle nut it would lol i posted an update removal attempt with a breaker bar and the breaker bar broke at the head lol i concluded that the axle nut it siezed or rust welded on there gota post another update heating up the axle nut then trying it with dcf850
It's an impact driver, it's for driving screws 😂
Lol but you cant use it for other things because it’s prohibited 😂 even tho attachments exist its still prohibited 🚫 ✋ 😂 so do not try this at home kids make sure you waste more money and buy the proper tool instead of jus getting an adapter ok kids dont be an idiot like the guy in the video always get the right tool for the job 😂🙄 and never improvise either cus apparently you look like an idiot when you improvise 😭 (i dont know why, but i feel like i have to mention , all that was sarcasm)
I take my comment back but semi stand by it so il leave it posted but the reason i say i kinda take it back is because i broke the drill bit for a second time today the DCF850 is too strong and breaks the hex shaft if the nut or bolt is torqued to tight or seized but i guess you kinda right cus the limiting factor is the hex shaft , but honestly dont know how the 1/2 inch drill with hold up vs a seized nut or bolt
@@GazBoyZ yeah, the main reason I said that is because in a real mechanic setting you don't have room for an adapter and a socket plus the drill.
@@TheAceAtGames true true especially when working on German cars like the tightly packed engine bays of these audi’s are a nightmare, but i already had the dcf850 and just now getting more into cars mechanically so hada give the adapter a try since i had the dcf850 already 🤗 works but not as versatile as the proper size half inch impact like the dcf921/dcf922/dcf901/dcf913 that already have/come with that 3/8inch attachment head
Not anymore!...
My 850 has a 3/8 anvil😎
th-cam.com/users/shortszUvkqn-Q1-E?feature=share
Use a proper 1/2in impact socket adapter and it should break the nut loose
thats what the dcf899/dcf900 is for :-)
Hi, this 850 is awesome for hanging kitchen cabinets and under hood work interior work, axels is not it’s job the 899 will rip that nut right off,
Does this work for drilling through masonry walls? Is it strong enough?
@@MINUSKAIRA hi, yes I do that a lot when I hang cabinets on concrete walls I drill a pilot hole with my dcf850 it’s awesome for that with 1-3/4” concrete hex fasteners,
The 899 is weak the 900 is way better
Did you give it a fighting chance? Spray it with pb blaster 24 and then 12 hours in advance
this bad boy can loose my car lugs nuts. Very impressed!!!
You aint getting that rusted thing off without some homemade sizzle juice.
Honda crank bolt when
Here's the thing... you wouldn't go at that with a ¼" drive ratchet, so a ¼" driver isn't gonna be big enough for the job. You might be able to get it with the ⅜" drive, but i would recommend ½" drive to be sure.
Wrong tool hahahaha
Only use an impact when installing hardware
I have learned this the hard way when the hex shaft broke when i took it out
That's what the dcf921 is for lol
True but dcf921 would have failed too but only because this axle nut was siezed on there good. I know this because i tried to remove it with a breaker bar and the breaker bar broke. You can check out the breaker bar update here th-cam.com/users/shortsIOxM5ejd4bQ?feature=share dcf850 would have taken care of this axle nut if it wasnt siezed cuz trust me its small but it aint no joke its TRUELY A TOOL FOR PROS
You are taking away all of the torque using that adapter
Bro said what’s a impact wrench like use a pry bar or an impact wrench😊
The gen 4 milwaukee m18 friver breaks nuts torqued to 550 ft lbs so that might actually do it
My DCF 921 will do that with the new 5 Amp Power Stack Battery
My roundhouse kick will do that
He didn't use the wrong tools. But he tried to show that this was inappropriate.😊
😩😩 why cant everyone be as understanding as you are 😩 lol thanks for letting them know lol
Lol he absolutely used the wrong tools.
That's not what it is for. Use an impact wrench.
Каким надо быть аленем , чтобы так делать…
Оnly 922 model, 911
Вот,что ждет людей,которые гонятся за мощностью и используют инструмент не по назначению,у кого конечно денег девать некуда,думаю могут себе позволить эту бессмысленную трату денег на оснастку,но компания девольт не остановилась на достигнутом и решила,что крутящего момента в 206Нм ей мало и они решили выпустить новый импакт модель 860 с круиящим моментом 282Нм,теперь те кому денег девать некуда могут их спокойно спускать на оснастку,а умные люди,просто возьмут в руки гайковерт и сделают свою работу без вреда для своего бюджета и инструмента,всем благ,девольт молодец,теперь надо выпустить импакт на 500Нм,ну а умные конкуренты в лице милки и других я думаю долго ждать не предется!!!
OH NO !!!!!
Get an adapter that will hold up and if the 850 won’t the 840 will
The 840 is only faster on screws. The 850 hits harder. At least what ive seen on tests
Laughs in rust belt
ㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋㅋ당연한 결과!!!
Powestack battery
Yes forgot to mention was using fully charged powerstack
Get a batter adapter and maybe some wd40 or some yeld it will come off
DCF 894 (mid Torq) is the best
New Mid series 891 is double the strengt of the older 894
Just did an axel nut the other day with an 894. It didn’t even have to think about it.
technically it didnt fail lol
DEWALT Update! Can Dewalt dfc850 do it? Pt.1.5! link here 👉 th-cam.com/users/shortsIOxM5ejd4bQ?feature=share
Use a proper impact
Wd 40 mínimo
DCF899 can do it easy
I know thats the big boy 💪 but honestly this nut was on there good my breaker bar even broke check it out on this update with the breaker bar failing too😭💔 th-cam.com/users/shortsIOxM5ejd4bQ?feature=share
The 899 wouldn't even break a sweat.
@@silversurfer806 on this axle nut it would lol i posted an update removal attempt with a breaker bar and the breaker bar broke at the head lol i concluded that the axle nut it siezed or rust welded on there gota post another update heating up the axle nut then trying it with dcf850
Use wd40 problem solved
It’s not meant for that..omg people now days
its normal
Smh not too smart
Salah alat
Nada enchilada