This is incredible. I love the design that you keep the tempered glass on the side and put the distro plate on the back. I'm an OCD so if the distro plate is about the same height as the case to cover all the space, that's great
First time watching this channel. Song was trash the first time around... had to fast forward thru it. Then I realized it never stopped and was looped. Got mad, left this comment and now I'm out. Have a nice night!
Yea good video but the song once was enouh but apparentlu he dosent give a fuck about his subscribers to even look at the comments and thats a shitty youtuber in my opinion
At the beginning of the video during the preview of the final build I legit gasped, I think that's what they call a nerdgasm? daaaamn fine lookin build
This is a really incredible build. The tubing runs you ran to the distribution plate especially. Also your trick to keep the GPU from sagging is seamless. Just one opinion, I would suggest is for the flow sensor wire to be tucked behind and then back around for a cleaner look. That's just nitpick really. Congratulations overall.
@BowlingNG by "trick" do you mean the connector from GPU to RAD? Does that section actually run water or he's just using it to support gpu? Phenomenal build
This was super cool to watch as I just got my first gaming rig. The song for 10 minutes killed me though. BUT IF I LAY DOWN AND I PLAY DEAD AND I STAY DEAD….then I can’t game 😂
Actually he didint. all that does is creat little bubbles in between the cpu and plate when he presses it on. To much. Just put a little bead of paste and put the plate down. No need for all that.
@@crowschattenpfote You can see at the beginning from the video from 0:40 Cryonaut Extreme at first on the right side and later on the left side of the table.
A beautiful computer came out of you, I wish you good luck, I will have the same one in the summer of 2023, only on the Ryzen 9 5950X processor and the RTX 3080 10gb GPU made by Gigabyte. With love from Russia🇷🇺
That thing is a Dimm.2 module and that’s a thing that only asus has and you can but ssds in it, which can run over the cpu. But it’s only available with the high end board, like the Asus Apex or extreme😊
Nice build! Looks very clean, light and not too overloaded with some secondary staff! Even though I'm not a fan of any RGB lighting, that particular one set looks pretty well. I wonder, what level of noise you should expect to experience from such built PC staying at approximately 1 meter distance from it?
awesome build very close to what am planning with the black case. i do have a few questions. which vertical mount did you use? is that the O11D Distribution Plate G1?
@@masterhacker7065 cool I didn't know there was a side mount one for the xl. Something about the front panel distro that doesn't sit all that well with me .
Can you run the pc so Open oar do you have to Close the case With the Glas panels? Because i Like it and i want to Build my own Water Collins in the o11 Dynamic evo. And want it to have it Open all the time. Is that possible ?
There are only fans that blow outwards, none that blow in. Doesn't the housing always have a negative pressure and the housing draws in dust from all slots?
tbh..custom watercooling is mainly for looks these days, it might be a few degrees cooler but nothing to justify the cost. This is just a vanity project for people who like looking at plumbing.
What temps did you get on this? I putting a build together with the supreme x and it has a active back plate. I'm debating if I double fan the bottom or stick a thicker rad in.
I also wanna build in the same case a water cooled amd 7000 build... But i am going to use flexible tubing because of you not needing the extra things to bend it and all the problems that come with stif tubing
a quick question if anyone can answer, the liquid is been cooled by top radiator, isn't that supposed to be for hot air exhaust, just saying isn't the liquid cooling radiator getting hot air. P.S. Newbie here trying to learn stuff so I can DIY my setup
How did you get the 3x8 Pin on the 3090 Ti Suprim X?! Mine is delivered with a adapter for 3 8 pin PSU cables ending in a 12(?) Pin cable fitting for the Suprim X. Is it different because of the watercooled version?
No need to use those tools to add Thermal paste. It looks fancy and all putting it on like that but all yer doing is creating tiny micro pockets between the CPU and your plate when you finally press it down onto the the CPU surface. just put a bead of thermal there and be done with it. The build his fucking fantastic though. Superb work on this PC.
This is incredible. I love the design that you keep the tempered glass on the side and put the distro plate on the back. I'm an OCD so if the distro plate is about the same height as the case to cover all the space, that's great
This has to be the most beautiful build I've seen.
It's builds like this that inspired me to build my own high-end computer.
Your vids are always great but everytime i hear the music loop for a second time i can't help but to sigh, cmon man
First time watching this channel. Song was trash the first time around... had to fast forward thru it. Then I realized it never stopped and was looped. Got mad, left this comment and now I'm out. Have a nice night!
I thought it was ok
Yea good video but the song once was enouh but apparentlu he dosent give a fuck about his subscribers to even look at the comments and thats a shitty youtuber in my opinion
for me, prefer raw sound, no music background
You guys don't watch custom build videos on mute?. Weird, i thought everyone was doing this
At the beginning of the video during the preview of the final build I legit gasped, I think that's what they call a nerdgasm? daaaamn fine lookin build
This is a really incredible build. The tubing runs you ran to the distribution plate especially. Also your trick to keep the GPU from sagging is seamless. Just one opinion, I would suggest is for the flow sensor wire to be tucked behind and then back around for a cleaner look. That's just nitpick really. Congratulations overall.
Hah?
The name of that little "tray thing" that keeps the GPU from sagging? Any idea as to what its called?
@@MassiveReset I think it’s sth. like a riser cable.
@@crowschattenpfote thank you very much
@BowlingNG by "trick" do you mean the connector from GPU to RAD? Does that section actually run water or he's just using it to support gpu? Phenomenal build
This was super cool to watch as I just got my first gaming rig. The song for 10 minutes killed me though.
BUT IF I LAY DOWN AND I PLAY DEAD AND I STAY DEAD….then I can’t game 😂
на проце прям аккураааатно размазюкал пасту, а вот на гпу тяп-ляп и готово)) лицемер)
That is one of the cleanest and great looking build I have seen
clearest? is full of tubes
@@pixelgaming8632 mate , I said cleanest not clearest.. please read properly
Cleanest? Is full of tubes
Setup was amazing and great to follow, especially after putting the music on mute 😉
sweet build dude!! I really enjoyed the thermal paste being applied nice and even, very cool!!
I like this part 0:49 you did very good job on thermal paste !!
Actually he didint. all that does is creat little bubbles in between the cpu and plate when he presses it on. To much. Just put a little bead of paste and put the plate down. No need for all that.
I did the same with the thermal paste as well! I squeeze it onto my CPU and then spread it evenly covering the entire surface with a butter knife.
@@ivanyu3930 Yes. I think this is the best way to cool CPU rather than 5 point dots method.
لكم الدنيا و لنا الاخرة باذن الله
Love it nice-work of art! :)
These boys are on another level.. sheesh..
Could you add glitter to the water? It would look totally amazing :)
I had this long paragraph to leave a comment on but decided to shorten it a bit. SEGZYAF BUILD!
End multicore test Cinema Bench R23?))) Loke awesome!
please tell me what is this Asus device that is in your video in 1 minute and 30 seconds? 🙏🙏🙏 thx 😉
Can you please put the mother board on a rubber matt when pressing in components, my OCD was flying off the scale
So clean 💯💯💯
the only bend that's really annoying me is the 90 on the right side of the top radiator, it's a really tight angle yes but it bugs me a bit.
wow damn that's beautiful great job
Lian li uni fans still looks better than lian LI new infinity fans.
Good vidy.
Sweet Build Sir.. I need One Clarification What's the Exact degree And time for hard tubing pipe melting ??
love the pink thermal paste 🤣🔝
Is this Thermal Grizzly Kryonaut ?
@@crowschattenpfote Idk, just thought it's different from the usual...
@@tito_codm ok i don't know either oh by the way i just watch all the videos from this channel right now and without a break.😂
@@crowschattenpfote You can see at the beginning from the video from 0:40 Cryonaut Extreme at first on the right side and later on the left side of the table.
Why you use this thermal past if you dont cool it with liquid helium. It makes no sense
As always, a great build. 🤩
A beautiful computer came out of you, I wish you good luck, I will have the same one in the summer of 2023, only on the Ryzen 9 5950X processor and the RTX 3080 10gb GPU made by Gigabyte. With love from Russia🇷🇺
you could have put fans behind the reservoir and pointing into the case to cool off the water coolant
I dont think some fans are gonna pass through thick acrylic to cool the coolant, there are radiators for a reason😂
Aww you don't show the hardline tube fitment and cutting. Straight plug and play only. Anywho, awesome open looped water-cooled PC build sir.
nice build can i ask what is or where did you buy the tube cutter and the tube bending guide tool?
@1:40 what is the SSD to RAM adapter you used?
That thing is a Dimm.2 module and that’s a thing that only asus has and you can but ssds in it, which can run over the cpu. But it’s only available with the high end board, like the Asus Apex or extreme😊
OMG... My Dream Build !!!
I cannot find the Lian Li strimer plus V2 24 and Triple 8 pin in white, in south africa and not in Belgium and Holland
Wow so clean build ...👍👍👍
Nice build! Looks very clean, light and not too overloaded with some secondary staff! Even though I'm not a fan of any RGB lighting, that particular one set looks pretty well. I wonder, what level of noise you should expect to experience from such built PC staying at approximately 1 meter distance from it?
its little subjective but found it very quiet
U don’t rely as much on fans with water cooling, so should be very quiet
Возможно я невнимательно смотрел, но где помпа?
can someone tell me what that white rotating plate is at 0:07
awesome build very close to what am planning with the black case. i do have a few questions. which vertical mount did you use? is that the O11D Distribution Plate G1?
looks like the vertical mount from Lian Li, and yes that's the G1 distribution plate from EK
Yah it's the o11 D distro plate which imo looks bad in the xl version of this case when you can get the o11 XL distro plate for front or side
@@masterhacker7065 cool I didn't know there was a side mount one for the xl. Something about the front panel distro that doesn't sit all that well with me .
The vertical mount with water cooling looks nice but it's kinda annoying if you need to clean or access the motherboard behind the GPU.
The Quantum Torque titanium...is it the 12mm fitting? And how many you need? Thank you.
Okay I need help what’s that fan thing in the loop I need one of those! First time pc builder
Lovely aesthetics. I hope my next build looks as nice.
What Watertemp you get after 30min of Gaming ? i would think 2 Slim Radiator are not enough
めっちゃカッコいい
Can you run the pc so Open oar do you have to Close the case With the Glas panels? Because i Like it and i want to Build my own Water Collins in the o11 Dynamic evo. And want it to have it Open all the time. Is that possible ?
Pure work of art 👍👍👍👍
해외 유튜버 영상인줄 알았는데..마지막에 냉각수 글자에서 뿜었네 ㅋㅋㅋ
What vertical Riser is this?, because I'm looking for the one so I can fit the 3090 ftw3 with block and active backplate in the first slot.
That would be the Lian-Li 011DXL-1 Vertical graphics card holder with the 011DXL-1 riser cable PCI-E slot
There are only fans that blow outwards, none that blow in. Doesn't the housing always have a negative pressure and the housing draws in dust from all slots?
Bottom fans are blowing air in, in Pull-configuration.
Is the Bitspower tubing better quality? or did you just go that route cuz its a lot cheaper than the ek tubing
Why did you not put the kryonaut on your gpu ? Perfect on the cpu, but not sure why you wouldnt add it to the gpu :/
I want to buy this setup how can I have this? How much will cost me?
One suggestion...please use gloves for every build...👌👌👌
what is that card plug in to dram 1:27
This is a Nvme Adapter/Extender Card , not Dram
Dimm.2, and its not RAM, its for NVMe storage.
I wonder if there can be a similar build for 4090s
Looks really cool. What size/type of extender fittings did you use on the CPU and GPU block?
I think fittings for 16/10 Tubes but I don’t know. Look in the discription
I also think 16mm since the tubes are 16MM.
OMG so an beautiful amazing Build. I love it. How much cost this complete Build ?
easily 5000 to 6000 dollars in parts.
Beautiful build
how are the tempetures with these ? if you compare it with a normal build ?
tbh..custom watercooling is mainly for looks these days, it might be a few degrees cooler but nothing to justify the cost. This is just a vanity project for people who like looking at plumbing.
What temps did you get on this? I putting a build together with the supreme x and it has a active back plate. I'm debating if I double fan the bottom or stick a thicker rad in.
Hello may I ask um can the Asus ROG Maximus Z790 Hero be a replacement to the Asus ROG Maximus Z690 Apex in this build
Of course. Why I couldn’t be a replace? It’s a top board
1 word "WoW" Like Star Ships...
I also wanna build in the same case a water cooled amd 7000 build...
But i am going to use flexible tubing because of you not needing the extra things to bend it and all the problems that come with stif tubing
Buy pre bend tubes, just need to cut them
@@iTouch4444 where ?
@@J.king87 Amazon and some other tech sites they provide few of them
please tell me what prize? and how can i pick it up?😉
What is the price of that?
How many Fittings do you have used for the build?
Yes
🤣🤣
@@iTouch4444 Same i want to build this pc but i don’t know how many fittings for this build 🥲
하나의 예술품을 보는듯하군
I bought a similar build to this from a company, how would I remove and change parts for example the graphics card? Step by step anyone?
is that thermal paste or colgate?
How much it a build like that?
builder: what's your budget?
client: no.
I want this pc , what is the cost
a quick question if anyone can answer, the liquid is been cooled by top radiator, isn't that supposed to be for hot air exhaust, just saying isn't the liquid cooling radiator getting hot air.
P.S. Newbie here trying to learn stuff so I can DIY my setup
It does exhaust hot air in fact, but its not really an issue.
And also, there is also a bottom Radiator cooling
AMAZING
I AM GRAPHIC DESIGNER AND GAME MAKER
I WANNA SAY SOMETHING IN THIS MOMENT THE PEOPLE LIKE GAMING ROOM LEARN AND GET MONEY
BEST FOR YOU
A humongous pc case 😲
Uff 😤 9-10
why 9 lol 😅
Bc is to expensive for me 💔🫠
@@abdul_wahab0 I think because he hasn’t the money to build it 😂
Because cooling potential is wasted with no airflow at front
How did you get the 3x8 Pin on the 3090 Ti Suprim X?! Mine is delivered with a adapter for 3 8 pin PSU cables ending in a 12(?) Pin cable fitting for the Suprim X. Is it different because of the watercooled version?
He has a normal 3090 and these have normal 3x8 Pin, while the 3090 ti uses the 12 Pin you mentioned.
How much will have to spend to get this done as of today (Nov 17, 2022)?
I spent 4k on mine I had built
все кульки чтоль на выдув работают?
Nice build! *-*
had to mute due to annoying music but thats my next build for sure
What vertical base did you use for the GPU??
No need to use those tools to add Thermal paste. It looks fancy and all putting it on like that but all yer doing is creating tiny micro pockets between the CPU and your plate when you finally press it down onto the the CPU surface. just put a bead of thermal there and be done with it.
The build his fucking fantastic though. Superb work on this PC.
Beautiful computer.
How about the price in USD???
just enjoy the configuration just don't ask for the price :)
Around 9K for everything next time @abdusaid Abduraufov don’t be a bitch about it next time
YW @ dodiauliareza
@@abdusaidabduraufov5615 Just asking. Even know it's not my capabilities 🤣🤣🤣
Roughly $5k-$6k in USD.
No active backplate?
I use extreme heat returner rather than sea fluid
How much would this be and where do I buy lmao
\
Sick ass video dude
SO NICE MUSIK
amazing build :)
Lets talk about the Temps and Performance, not bout the look
720 Rads , and trash airflow
what thermal paste is that ?
Bro make one more pc and give title
Pc for play GTA 6
BECAUSE A GTA 6 IS COMING SOON
AND WHAT IS REQUIREMENTS?
MAKE IT Bro
insane build
Vertikal GPU mount ?
song??
역대급으러 이쁘ㄴ다
Full bộ là bao nhiêu vậy ad
Pretty!