AGLoRa (Arduino + GPS + LoRa tracker)
ฝัง
- เผยแพร่เมื่อ 13 ธ.ค. 2021
- Project "AGLoRa" - easy opensource LoRa GPS tracker. github.com/Udj13/AGLoRa
How to find someone without a mobile signal?
AGLoRa is an acronym for "Arduino GPS LoRa".
LoRa (from "long range") is a proprietary low-power wide-area network modulation technique.
Device can be used for hiking, sailing and other outdoor activities in the locations without GSM. - กีฬา
![[LoRa Project] ESP32 LoRa, GPS Data showing on the Map](/img/n.gif)
elimdeki ebyte lora modülü ile bu projeyi deneyeceğim, tam da aradığım bir proje, aklımdaki bir çok soruya çözüm oldu, umarım başarırım, tebrikler, teşekkürler.
hüseyin bey bu projeiyi gerçekleştirebildiniz mi?
Как обычно, смотреть не стал, но лайк поставил!
Музыкальная дискотека))
Лайк, подписка, колокольчик!
Sorry to bother you, this project is important to me, I've been trying for a long time, but I couldn't communicate with the receiver. I'm using the Lora 220.900T22D model, I tested the models with other software and it works. Are you using the same address on the receiver and transmitter in the software? Are you using fixed mode or normal mode? thank you very much. Respects.
If the module works with other software, perhaps there is not enough power for simultaneous working of LORA and GPS?
Can you help me find the fixed mod in the ebyte user manual? The link was in a previous answer.
@@udj13 thankyou
Thank you very much for your work and sharing. Can you share the transmitter code too?
The device works both as a receiver and as a transmitter at the same time.
@@udj13 thank you.
Hi, I tried to implement your project but I couldn't succeed. I want to ask a couple of questions. Do you run lora modules in fixed or normal mode? loraTransceiver.SetAddressH(0xFF);
loraTransceiver.SetAddressL(0xFF); aren't there two addresses here? thanks
loraTransceiver.SetAddressH(0xFF);
loraTransceiver.SetAddressL(0xFF);
This lines sets the broadcast transmit mode. You can find this at the 8 page of the user manual.
www.ebyte.com/en/product-view-news.html?id=1211
@@udj13 thankyou very much.
Hey!! I'm beginner. I want to ask some questions, kindly respond.
Had you used two lora modules? Can you provide me complete circuit diagram?
Hi! You can see section "Wiring" on github.com/Udj13/AGLoRa
and only same modules could be work together (attention to the frequency)
@@udj13 I request you to check your mail.
@@miisha626 ок! )
Does it have to be connected to an internet signal or WiFi?
No, backend support will be in the next version. I'm working on it
Круто! Забавно как одна идея приходит сразу многим. Я сделал похожее устройство, только без смартфона. Тоже открытый проект, заходите, может чего для себя найдете)
О, здорово! Поставлю на вас ссылочку, может быть кому-нибудь пригодится! Спасибо за комментарий! )
@@udj13 Большое спасибо! Успехов вам)
Hello. I tried to do your project before but I couldn't succeed. I decided to deal with it later. now i managed to run your project ble i can see package information on serial monitor. but I cannot connect to aglora apk with hc-05, hc06 bluetooth modules. I can connect with the hc bluetooth terminal, arduino bluetooth apk programs that I have installed on my phone and see the ble package information. If you help me fix this problem, I will have completed the project.
I can't install apk file on my a32 samsung phone, i can install it on my samsung j5 phone.
also it would be nice to see the data on a screen rather than on the phone.
Thank you very much for your work, it is very valuable to me. waiting for your help.
Yes, I know about the problem with new phones. I already have an apk for new versions, I will post it on Google Play soon.
I'm rewriting the project with new libraries now, and I'm also making test programs for easy troubleshooting.
I just saw your message. Thanks a lot for your work. I'm waiting for the new apk file. apk file is being installed on my samsung j5 phone, which I do not understand, when I click on the scan section, the bluetooth address does not appear. I wonder if there is a mistake I made.
Что за лев этот тигр!!!
you dont have mobile app in your github repository, also why not use esp32?
Work on esp32 + ra-02 in progress. App: github.com/Udj13/aglora_client (flutter, ios+android). The next version of app will be available on google play.
@@udj13 thank you for github link it that url doesnt exist
@@wasim21k I'm so sorry, my mistake! github.com/Udj13/AGLoRa-client-flutter
Крутая штука, но я пока даже повторить не смог
Как с вами связаться?
shlyagin@gmail.com
Can't you just use one of those apple find me things?
I don't think that they work for 8 km distance.
From Apple: "Your AirTag sends out a secure Bluetooth signal that can be detected by nearby devices in the Find My network"
It won't work where there is no cell service.
@@udj13 mmm, true. Why don't use that board for drones to give them more distance?
@@scanner_956 Similar projects already exist. But now i want to reduce the weight to make a "lost drone finder".
@@udj13 great stuff man. I try doing things like this too but not quite where you are yet. I'll probably try this myself shortly in the future.
Hello I want to recreate your idea it’s very interesting I have couple of questions can I send u an email ?
interesting video,
I can have your email please
thanks! shlyagin@gmail.com