You don't need to use Touch and then Lock/Align on the bolts. Instead use only Lock/align on the edges, that are going to lie in the same plane. Then the bolt is fully constrained. Same goes for Concentric and Touch. Concentric essentially brings the two edges in the same plane, but allows for rotation.
Thanks for the video, I have a question I want to make a machine that has hinges and I need it to open and close, first I have to do an assembling and then give it movement, do you have any video demonstration? Thank you.
Dear Ally PLM, Thanks for video, I would like to ask a question. I don't see command CREATE COMPONENT ARRAY like you. I am using Nx 9.0. Could you please show me where that command ? Look forward to your reply soon. Hope for your cooperation! Thank you a lot in advance. Best regards
Hi Duong Pham! He pick the bolt then go to component (component is a BASE has array 4 hole) so its follow array of the component that gives you 4 bolts) That's pretty cool. This feature doesn't apply to Solidworks. You can try by go back to the BASE change the array to 6 holes. It'll give you 6 bolts. Is that right Ben Roll?
Top Down Assembly just means editing/creating a component/subassembly in the context of a higher level assembly. Some people call this in place edit. In NX we use "Make Work Part" to access the component. Bottom up assembly means we are adding a "finished" component to the assembly.
CSYS is a Datum Coordinate system. It has 3 datum planes, 3 datum axis, and a point. You can create multiples in any file. The WCS is the Work Coordinate System. You only have one WCS and you move it around to reference. Commands and options where you see XC, YC, or ZC reference the WCS.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
You don't need to use Touch and then Lock/Align on the bolts. Instead use only Lock/align on the edges, that are going to lie in the same plane. Then the bolt is fully constrained. Same goes for Concentric and Touch. Concentric essentially brings the two edges in the same plane, but allows for rotation.
thank you so much this video is very helpful .... very good explained thanks (y) ..
i was in 7th grade when you made this, thank you from SA
Awesome video it helped us lot....Thank you so much allyplm thank you
Thanks for the video, I have a question I want to make a machine that has hinges and I need it to open and close, first I have to do an assembling and then give it movement, do you have any video demonstration? Thank you.
Thank you sir...very good explanation
Thank you my friend!
When is the next lunch bytes coming out?
how can i make a core and cavity in nx . please tell me sir and thanks for this video
Dear Ally PLM,
Thanks for video,
I would like to ask a question. I don't see command CREATE COMPONENT ARRAY like you.
I am using Nx 9.0. Could you please show me where that command ?
Look forward to your reply soon.
Hope for your cooperation!
Thank you a lot in advance.
Best regards
Hi Duong Pham! He pick the bolt then go to component (component is a BASE has array 4 hole) so its follow array of the component that gives you 4 bolts) That's pretty cool. This feature doesn't apply to Solidworks.
You can try by go back to the BASE change the array to 6 holes. It'll give you 6 bolts. Is that right Ben Roll?
Thanku dost nice vidio..
What is mean by top down assembly concept?
what is mean by bottom up assembly concept?
Top Down Assembly just means editing/creating a component/subassembly in the context of a higher level assembly. Some people call this in place edit. In NX we use "Make Work Part" to access the component. Bottom up assembly means we are adding a "finished" component to the assembly.
Thank You
Hi.
Could you please explain the difference between the CSYS and the WCS in an assembly, please?. How many of them I have?
CSYS is a Datum Coordinate system. It has 3 datum planes, 3 datum axis, and a point. You can create multiples in any file. The WCS is the Work Coordinate System. You only have one WCS and you move it around to reference. Commands and options where you see XC, YC, or ZC reference the WCS.
Thank you sir.
thanks
so boring but usefull