I have 2000 450es. After many problems with the es, I gave up and got a kit to bypass it but haven't gotten around to installing it. Meanwhile I lost spark and replaced coil, plug cdi and voltage regulator etc but now I think it's the pulse generator. Anyway, after the regulator was installed I checked the es and damned if it didn't work like new. Full shifts up and down including reverse. Dang....
Have a 2000 450 eps and it will work for a few minutes then the 30amp fuse by the batter pops and I put a new one in and it does the same thing, looks at the wires to see if anything was open to the steel and the wiring looks good, what else could the problem be here? The ECU? To much voltage to the fuse making it blow? I took it in to get fixed and they couldn't figure it out! Any help would be great
i got a 450 ..the esp does nothing when you push the buttons. ive eliminated the push buttons, shift motor, fuses as the problem. when i turn key on the shift indicator indicates N..when i manually shift it it shows -- for 2,3,4 and shows r,n,1 n 5 i think this eliminates the gear position sensor. ive check angle sensor and both sides read 1.3 ohms which according to this vid is out of range. can i asume the ecu is getting power since the numbers r changing on the indicator? any input would be appriciated.
i have a 2010 420 that had the shift motor locked up. i replaced it and now it shifts easy to fist but have to stop before i can shift in any other gears. any suggestions?
I need help with a honda 450 rancher 2006 when i put the gear in D i get -- and when i change to esp at first it works but then i get -- and wont let me shift down or up plz help
Hondas are NOT the best on Earth, all Hondas have problems with shifting and the frames become rotten to pieces. Engines are awesome I must say, but bad shifting takes away greatness.
Thanks for posting this; nice to have an explanation of how the system was designed to work.
I have 2000 450es. After many problems with the es, I gave up and got a kit to bypass it but haven't gotten around to installing it. Meanwhile I lost spark and replaced coil, plug cdi and voltage regulator etc but now I think it's the pulse generator. Anyway, after the regulator was installed I checked the es and damned if it didn't work like new. Full shifts up and down including reverse. Dang....
Cleaned out the speed sensor and it worked!! Thanks for posting this!!
Im having issues with mine not wanting to shift at all and not in no fail mode or throwing a code. Can I ask what yours was doing?
Should the angle sensor be covered in oil when you take it off
Thanks for posting this. Regret ever owning one of these units nothing but problems
Esp stands for E: electric S: shift P: (problem’s)
Have a 2000 450 eps and it will work for a few minutes then the 30amp fuse by the batter pops and I put a new one in and it does the same thing, looks at the wires to see if anything was open to the steel and the wiring looks good, what else could the problem be here? The ECU? To much voltage to the fuse making it blow? I took it in to get fixed and they couldn't figure it out! Any help would be great
I have a 06 Honda Rancher 350 ES, it wont give me a neutral light even though it's in neutral, any suggestions?
Great informative video, but has to be the poorest blurry video I've ever seen! Takes a lot away not being able to see clearly.
The best info found
i got a 450 ..the esp does nothing when you push the buttons. ive eliminated the push buttons, shift motor, fuses as the problem. when i turn key on the shift indicator indicates N..when i manually shift it it shows -- for 2,3,4 and shows r,n,1 n 5 i think this eliminates the gear position sensor. ive check angle sensor and both sides read 1.3 ohms which according to this vid is out of range. can i asume the ecu is getting power since the numbers r changing on the indicator? any input would be appriciated.
That is a bad angle sensor
Then would it still work sometime?
I can put a electric shift 350cc change to a 420cc?
poor video quality but the best info Found to understand and diag the problemes
My foretrax makes shift sounds but not shifting into gear
i have a 2010 420 that had the shift motor locked up. i replaced it and now it shifts easy to fist but have to stop before i can shift in any other gears. any suggestions?
Supposed to do that
I got a 2000 350 es and I'm having nothing but trouble shifting
I need help with a honda 450 rancher 2006 when i put the gear in D i get -- and when i change to esp at first it works but then i get -- and wont let me shift down or up plz help
El cuhh Cuhh did you find a way to fix it ?!!!
ESP stands for Electric Shift Problems
Do yourself a favor and absolutely do not get the ES model!
Hondas are NOT the best on Earth, all Hondas have problems with shifting and the frames become rotten to pieces. Engines are awesome I must say, but bad shifting takes away greatness.