Is there a way to safely un-weld the IC from the new screen? The idea of grinding scares me more than heating it up :\ Also it would be quite nice to weld it back on the old screen to retain it's functionality. Or maybe programmators are finally able to deal with that?)
Try stencil for iPhone 8, as we did. it is here if you need anew one :www.cinomall.com/collections/soldering-tools/products/iphone-bga-stencils-for-iphone-8-8-plus-x
@@CINOTechnology im going to have to disagree...even if its "uneven" as long as the contact is made and secured as close to OEM....then it will be fine. The grinding process is not needed
NO, that requires a JC programmer for the Truetone. Also the face ID is based off the Front Camera. if that Front camera is damaged, or replaced, you lose face ID
@@amalekited It does, proceed with caution. I also can't guarantee it's the reason why our 11 repairs don't have this message. Apparently there are now replacement screens that won't trigger this. Cinoparts were sending me emails advertising them, though never used them so can't vouch for their reptutation
Русским привет. 2020 год, е?нул экран на своем 11, жду оригинальный свой экранчик, буду также делать, как полет будет отпишусь всем, надеюсь получится. Этот американец объясняет лучше чем Русские, правда. Good job Big Master! I'am from Russia!!
Can you tell from where REWA copied this method? If someone try to fix charging fault by replacing the TriStar IC then what would you say?.... "Oh copied from REWA".
How do you line up the Touch IC pins 100% perfectly with the boning pad? It seems like there is very little room for error?
really love all your jobs, lots of knowledge
simple question
can important battery and LCD message iphone
without its original baggage
Thanks for voiceover CINO... Appreciated
:)
Hi, to change the touch ic of the original display will be ok display For iphone 11 ZY OEM?
Does this method work for displays on your site?
I am Wonderinger if a service like this exists for European market... On TH-cam they seem to be all located in Shenzhen
Yeah，Shenzhen is full of this stuff
Still have water proof?
so the programmers don't work anymore?
No, it only cannot solve the display warning message
Jcid compare icopy which is good
Is this method used on the xr and x xS or is it only 11 and up?
only 11 series and up
Can i update ios after screen replacement with non geniue lcd?
Is there a way to safely un-weld the IC from the new screen? The idea of grinding scares me more than heating it up :\
Also it would be quite nice to weld it back on the old screen to retain it's functionality.
Or maybe programmators are finally able to deal with that?)
Actually heatin it up requires more skills, try n y'll know
what about if touch ic from the broken screen is not original? there is no fix for that right?
That doesn't solve the message
Nice Craftsmanship 👨🔧
Thank you
Hello Cino , plz plz plz, tell me which stencil you used for reballing? i tryed iphone 5 - iphone x stencil. no one is compatible with the chip
Try stencil for iPhone 8, as we did. it is here if you need anew one :www.cinomall.com/collections/soldering-tools/products/iphone-bga-stencils-for-iphone-8-8-plus-x
Will they make aftermarket screen the same as OEM so this method can work with aftermarket screen? Maybe without the chip.
It only works on OEM screens
Check the signal of AP_PS_HOLD = 1.8V Bro what is this mean please reply
This is the Supply voltage/command to pm ic from AP to stay on in working mode.
Other wise the power rails may behave with a heavy fluctuations
Thank you for your reply
Thanks dude I subbed to your channel too I’ll watch and learn from both of you
Can we just remove the touch ic without grinding? And replace it with the original touch ic
Cannot do that, since the bonding pad of touch IC will become uneven after heating up, so the grinding is necessary.
@@CINOTechnology ah i see, btw how do we know we grind enough so we dont accidentally tear the cable? Any tips
@@CINOTechnology im going to have to disagree...even if its "uneven" as long as the contact is made and secured as close to OEM....then it will be fine. The grinding process is not needed
How did you know if the true tone is not normal? I did not notice the change.
It is about how to remove the warning message, not ture tone
How about condition after 1 weeks after modify chip on LCD ?
The same as when fixed.
Hello , ita a perfect video ! I want to ask one think , I need grinder ! How I can buy it
Check here: www.cinomall.com/products/oca-removal-grinding-tool
I heard if we do not fix it, after 4-5 days the sign disappears, and only stays in settings, but later it goes away from there also. Is that true?
no. After one week the notification is still in settings
No, it would not goes away
Big brain. Just did one today.
does this work without programing?
This is done by replacing the original IC with the first screen.
Halo Cino team. very good job. Respekt. i have one quastion. wich model your grinding machine?. thanks.
It is a portable handheld grinding tool.
Only works on original display or also works with Chinese not even oled?
So far as we can say, only works on OEM displays.
please please struggling to find stencil for 11 pro max IC , great video !
All right
Got stock on same problem.. cyber_kor on Instagram did it for me. He is the best and very reliable.
I have this issue
I buy an iphone11 from shop as used iphone
What i have to do now
Plz help me
If you don’t have original then?
We‘ll still make it work.
@@CINOTechnology ok thanks
Swipe left on main screen and the message is gone
customers barely able to pay for lcd itself lol and add this to it , no way they pay for it
The compulsive warning is quite unbecoming
Hello, i have a quick question, will trueton and face id work perfect after this ?
Thank you
NO, that requires a JC programmer for the Truetone. Also the face ID is based off the Front Camera. if that Front camera is damaged, or replaced, you lose face ID
Very useful channel 👍
: )
be careful from overheating backlight.
How much it cost to fix this way ???
Well, different place got different price
Thank you 🙏🏻
Or simply use a screen programmer
Cannot find one that works for this
@@CINOTechnology My JCID seems to fix this, but I have no idea how it's doing it, is it because we hotswap the screens?
@@_ryanspecter Hot swap doesn’t risk frying the backlight?
@@amalekited It does, proceed with caution. I also can't guarantee it's the reason why our 11 repairs don't have this message. Apparently there are now replacement screens that won't trigger this. Cinoparts were sending me emails advertising them, though never used them so can't vouch for their reptutation
@@_ryanspecter If it risks damaging the phone why do you hit swap then?
VERY HELPFUL VIDEO
thank you
Русским привет. 2020 год, е?нул экран на своем 11, жду оригинальный свой экранчик, буду также делать, как полет будет отпишусь всем, надеюсь получится. Этот американец объясняет лучше чем Русские, правда.
Good job Big Master! I'am from Russia!!
Спасибо. мы приехали из Китая
stupid apple company. milking customers in every bit of their core.
👏👏👏👏👏
:)
Just copied Rewa tech
Can you tell from where REWA copied this method? If someone try to fix charging fault by replacing the TriStar IC then what would you say?.... "Oh copied from REWA".
Maybe they are faster, but CINO have done it better~CINO Masters have THE skills and do not need to copy
Our method is different from Rewa
Why grind the IC instead of remove with heat?
Both works
@@CINOTechnology ok thanks