Moved into a home that had exact same unit for the front yard. I followed the instructions to turn on the station manually, and the display screen did nothing. Nada, zip, ain't happening.' So I bought an inexpensive lawn sprinkler. Simple, just screw onto the hose and turn on the water.
I follow these instructions exactly from this clip and the manual. My sprinkler System will not manually turn on any other station besides station one. Got any tips? thanks very much
Thank you for contacting Hunter Technical Support. There could be a few reasons that one of the zones is not operating correctly. Please see some of these suggestions below: • Turn off main system water supply • Replace solenoid • Must use Hunter DC Latching Solenoid (P/N 458200) or other compatible DC latching solenoid. Locate a dealer here if necessary. Other compatible solenoids listed in this support section. • Wiring may be backwards. Black should always lead to the common terminal and red to the station terminal. • Turn water supply and preform manual test. Our support team can also help. Please email support@hunterindustries.com for additional assistance.
Be aware when using manual mode, you'll need to shut if off yourself. It may be a better option to manually start an individual station so it shuts off at the programmed time.
Take a look at the product guide here: www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf or contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request
can this controller and a low flow valve be rigged up to a rain barrel and work effectively or would there be pressure issues opening and closing the valve? of course with drip line and emitters in mind.
Moved into a home that had exact same unit for the front yard. I followed the instructions to turn on the station manually, and the display screen did nothing. Nada, zip, ain't happening.' So I bought an inexpensive lawn sprinkler. Simple, just screw onto the hose and turn on the water.
I am about to do the same thing!
Please contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request
I follow these instructions exactly from this clip and the manual. My sprinkler System will not manually turn on any other station besides station one. Got any tips? thanks very much
Thank you for contacting Hunter Technical Support.
There could be a few reasons that one of the zones is not operating correctly. Please see some of these suggestions below:
• Turn off main system water supply
• Replace solenoid
• Must use Hunter DC Latching Solenoid (P/N 458200) or other compatible DC latching solenoid. Locate a dealer here if necessary. Other compatible solenoids listed in this support section.
• Wiring may be backwards. Black should always lead to the common terminal and red to the station terminal.
• Turn water supply and preform manual test.
Our support team can also help. Please email support@hunterindustries.com for additional assistance.
what does the :05 mean. It will run for 5 minutes or will it run until you set it to off?
The 1 0:05 indicates that zone 1 will run for 5 minute before turning off and moving to the next scheduled zone with a run time.
Hi.
For how long it will be on, on manual mode?
Be aware when using manual mode, you'll need to shut if off yourself. It may be a better option to manually start an individual station so it shuts off at the programmed time.
Doesnt work for NODE -400
Take a look at the product guide here: www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf or contact our customer support department here: www.hunterindustries.com/hunter-technical-support-email-request
Hi there!!! I bought this and love it, but having an issue hopefully you can answer. Is it possible to manually turn on all stations at once???
integratyper1 same question here
integratyper1 no only one atation at the time
Jose is correct, the NODE battery controller runs one station at a time.
can this controller and a low flow valve be rigged up to a rain barrel and work effectively or would there be pressure issues opening and closing the valve? of course with drip line and emitters in mind.