Really frustrating. I got the .177 BB full-auto version. I was very careful, loaded the cartridges gently and lubricated them beforehand. After no more than 6 cycles the magazine stopped piercing the bottom cartridge, and didn't keep the seal on the top one. The gas just bled into the magazine, building up pressure and making it impossible to unscrew the seal. These magazine problems have been there for years, even the newer versions where there's a slot to stop the spring when loading the BBs have them. I've returned mine to the shop, not sure if they'll even replace the magazine, and I'm skeptical a new one will hold longer than the last. Very disappointing for an Umarex product.
Привет из России! Я такой же владелец mp40 umarex. Отстрелял с него пару тысяч шариков. Столкнулся абсолютно с такой же проблемой. С осечками и застреванием шариков в магазине. Решение нашел следующее. Заряжать нужно не более 35 шаров, смазанных маслом для пневматики. Тогда подача будет без застревания. Я храню свои BB шары уже заранее в масле
That lube made it worse probably because its the spring and the lube u put might have been too thick. If you take spring out of magazing and stretch it out a bit when this happens, that may fix the problem
I did think I saw or heard you in another video saying you recycled bbs you'd already shot?....I reckon that could be half your problem. I know you said you don't do it now but I reckon if possible a good internal clean or strip down of the guns....could be grit in there etc. I was thinking of reusing my bbs when I got my first steel bb firing gun back in 2015 , when I looked into it on the online forums it was ALARM TIME!!!....don't do it , etc etc etc....hope you get it sorted, all the very best to you😊😊😊😊
R u using copper bbs? Ive had mine for a few years now and i found out all of them missfire like crazy woth copper bbs use black hornady anodized bbs u will never have a misfeed again.
Crosman dpms is similar, have you oiled up the rubber sills between the mags and barrel, oh you tried in video 😆 I have loads of airguns, mostly replica stuff and yeah most seem to break so easy and nobody wants to fix them, im going to start bitching in my videos a lot more just to get back at the companies that don't care about its customers. Hope you fix it
Really frustrating.
I got the .177 BB full-auto version.
I was very careful, loaded the cartridges gently and lubricated them beforehand.
After no more than 6 cycles the magazine stopped piercing the bottom cartridge, and didn't keep the seal on the top one. The gas just bled into the magazine, building up pressure and making it impossible to unscrew the seal.
These magazine problems have been there for years, even the newer versions where there's a slot to stop the spring when loading the BBs have them.
I've returned mine to the shop, not sure if they'll even replace the magazine, and I'm skeptical a new one will hold longer than the last.
Very disappointing for an Umarex product.
Привет из России! Я такой же владелец mp40 umarex. Отстрелял с него пару тысяч шариков. Столкнулся абсолютно с такой же проблемой. С осечками и застреванием шариков в магазине. Решение нашел следующее. Заряжать нужно не более 35 шаров, смазанных маслом для пневматики. Тогда подача будет без застревания. Я храню свои BB шары уже заранее в масле
Thank you you are right.
iv had like no problems with mine
Good advice, but only applies to BBs, don't store your balls in oil generally...
That lube made it worse probably because its the spring and the lube u put might have been too thick. If you take spring out of magazing and stretch it out a bit when this happens, that may fix the problem
Enjoy 👏
Be nice to have a game with Ben 😊
🤗
I did think I saw or heard you in another video saying you recycled bbs you'd already shot?....I reckon that could be half your problem. I know you said you don't do it now but I reckon if possible a good internal clean or strip down of the guns....could be grit in there etc. I was thinking of reusing my bbs when I got my first steel bb firing gun back in 2015 , when I looked into it on the online forums it was ALARM TIME!!!....don't do it , etc etc etc....hope you get it sorted, all the very best to you😊😊😊😊
No I don't recycle the 4.5mm balls they are really cheap.
@@grahamthebaronhesketh. 👍👍👍
I do try to re use the 6mm steels.
@@TheBaronAirGunReviews 🙂🙂🙂
Steel pellets don’t leave co2 in mag clean it and buy more mags one is useless , oil, oil maintain .
R u using copper bbs? Ive had mine for a few years now and i found out all of them missfire like crazy woth copper bbs use black hornady anodized bbs u will never have a misfeed again.
Crosman dpms is similar, have you oiled up the rubber sills between the mags and barrel, oh you tried in video 😆
I have loads of airguns, mostly replica stuff and yeah most seem to break so easy and nobody wants to fix them, im going to start bitching in my videos a lot more just to get back at the companies that don't care about its customers. Hope you fix it
👏👏🙏❤
If you load a magazine and leave it loaded for a longtime the spring wont work as well after a while
What if I leave it for about 24h? And how do I fix it? Because I had this issue once my gun arrived and I did leave it loaded for quite a while
24 hours will be fine even weeks. months or years will lead to problems.
@@TheBaronAirGunReviews but them why dose it keep not firing?