Tilta | How to Use Float System
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- Learn how to assemble the Tilta Float Handheld Gimbal Support System.
tilta.com/shop/tilta-float-ha...
This system works with the DJI RS 2 gimbal to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups.
Timecode：
0:00 - Intro
0:49 - Attach the V-mount battery plate
1:13 - Attach the battery plate to the post
1:29 - Install the monitor bracket
1:55 - Attach the wireless thumb controller
2:10 - Install the phone mounting bracket
2:21 - Install the power supply base plate for DJI RS 2
3:42 - Connect the power cables
4:22 - Install the wireless control receiver module for DJI RS 2
4:39 - Linking the wireless controller
5:36 - How to put on Float System
6:12 - Attach the arm
6:26 - Balancing the post
8:21 - Adjust the arm
10:09 - Adjust the monitor bracket
10:49 - The functions of wireless controller
11:48 - How to switch among the 4 power supplies
13:33 - About the waist belt
Learn More/Shop now at tilta.com/shop/tilta-float-ha...
#Tilta#TiltaFloat#DJIRS2 - ภาพยนตร์และแอนิเมชัน
Do you think this a bit too much for a toddlers birthday party? I am sure my wife will understand when she sees the fluidity of the video.
It would be the most Cinematic Toddler Birthday Ever! Maybe even Oscar worthy ✨
👌😂
Them babies are going to think your a cyborg 😆
@@rideordie2318 maybe I should go as iron man
🤣🤣🤣🤣
'How to build your Tilta Float in 7039 easy steps!'
Just kidding, looks absolutely amazing guys. The video community has been waiting for this for ages and someone's finally done it. I already have the RS2.. now I just need to find 1200 euros somewhere for the Float
Sadly, you’ll need even more money. And then the batteries and everything. I so want one but need to save a little money 😂
3:19 I've been hand tightening with hex keys wrong my entire life
Same hahaha
This is exactly what I was waiting for! Tilta knocked it out of the park, I love the engineering that went into this, the arm is awesome thanks for making it look like a futuristic piece of equipment, the carbon fiber post and all the different balance adjustments is pretty amazing, cudos to Tilta. For making me look professional! Without braking the bank.
This is so intuitive and easy to use compared to other systems I’ve seen. Wish I had b-roll footage to reference
Dope tech!
And much needed for our professional production environment in Bulgaria!
Can't wait to get my hands on it!🍻
Excellent video. Super clear and easy to understand and what a wicked product, great work Tilta!
Fantastic, and the price not a ripoff. Well done tilta
Need to be simplify , but once Mastered it's a killer beast . Tilta you nailed it . 👍
What a fantastic system by Tilta. A Trinity is overkill for my needs but this is perfect. Can’t wait for my order status to change 😆.
Thank you for the in-depth tutorial on this system. Amazing job.
Thanks, check out other Float tutorials on our DJI Ecosystem playlist at th-cam.com/play/PLoberV9bF5SdI8eSAJdC-Ow-um-DjCYpY.html
Amazing I Need to do a review on my channel about this! I'm beyond excited
There's a lot of interest in this product in the UK and i presume worldwide as well. We're still waiting for the demo units to be delivered although with shipping costs and time, it may be a while. It'll be interesting to see a proper demo of this unit showing all the different shots that it can get however there's going to be a lot of practice involved by the user to get those moves down pat!!!!
This is very solid !! Great work
Excellent video! Thank you.
What a beautiful piece of engineering.
That's pretty cool, I'd love to see the results.
Man that's some piece of kit. 😍
Looks amazing!
Trinity Competitor.
Thanks for you in detail description.
Mine is already ordered from belgium. Cant wait to get my hands on this one. Hope it will not take forever to arrive 😀
In what scenarios are you going to use it?
Hi Nico, I'm from Belgium as well, may I ask where you ordered your float? I haven't found any resellers here, or did you order it from the US, and if so, how much does it cost extra to get one here?
@@Chinois This is good to know
This is what im saving up for✌️🍾
The balancing looks more streamlined than most Steadicam rigs! :o
You would get more traction if you would provide sample footage and a shipping date.
According to retailers, this will ship not ship before March.
Mine shipped 3 days ago direct from China
着看起来很高级，希望有机会试尝一下！
We need a tutorial “how to order the flow system” now 🤣
No word about the lag on the phone also...clarifying this would help decide potential customers.
The delay is dependent on the wireless video system you are using! For example, the DJI Raven Eye and RED Control App for Komodo have very little lag!
Cant wait !
I ordered my Float about a month ago can't wait.
Do you know if it comes with the v-mount batteries?
@@ToCatchFilms yep vmount is standard. The other onces you have to order separately.
@@ToCatchFilms It does not include batteries!
WoW.. i might get one if reviews are awsome ..
Finally 🔥🔥🔥😬
fantastic
Hey Tilta, will you introduce larger size belts (vest) or is it only for the slim and small types?
Hi Jaro, unfortunately for now it is just the one adjustable vest.
After years of waiting finally the holy grale of stabilisation. Bye bye limitations. Ordered!
i wish their CLOSE UP can be more IN FOCUS
only downside: in tight space the back part of the rod will crash into a lot of things...
Great video thanks. Does anyone know if the thumb controller work with a DJI RSC2 gimble also? Or only the RS2? Cheers
Dude ! Take my money !! Lol
When is it available ? It’s been in preorder forever ...
Again... and it never comes out.
Hello, for your demonstration, to put you the translation activation under title in the TH-cam configuration. Or have a French version of Yuotube subtitle
Thank you in advance.
Ordered as well. I have a feeling we won't be seeing these in the wild for a while. Still waiting on some of the earlier stuff from a November order. :(
Still waiting on mine. Ordered a month ago like others. When is shipping starting? Can’t wait to start using this thing.
I'm still waiting for my Tilta BMPCC 4k Flip Screen For almost a Year now. Tilta doesn't seem to be prioritizing the people paying money for these products
@@CallMeRabbitzUSVI it's just they don't really care about people outside of China as they need to fill their Chinese order queue first, same like other Chinese company, they got lot of trouble when they try to sell their cheaper products to other Country, like US. Their product speed is stunning, but the time cost from China to US is extremely long, and the time cost from US warehouse to your front door is even longer, because we alll know how slow that everything works in US. a good example will be USPS, took 2 and half month to ship a lens cap to my front door.
Shipping in about 8 weeks!
Looks like so much work to get how you want it
The body support/vest is where this system fails. Putting the wieight on the waist and only 1 shoulder strap is going to cause back problems, trust me.
Thats what Im thinking, it needs a proper vest
im gonna be using my steadicam vest and arm with this. cant find any info on the size of the gimbal handle tho
We will be adding an additional support piece to address this issue!
Got mine yesterday. If you're a big guy like me, the vest won't even go round your waist. If you try and support this with tactical belts, it's a lottery. If you attach the arm the whole setup will tilt forward, screw up the balance of the arm and place such pressure into your back, you won't last even 3 minutes.
It's a major, major issue. Can't recommend a purchase of this at all, even though the gimbal and the arm is fantastic quality. The vest/belt is literally the backbone of the system and it fails incredibly.
If Tilta made a cheaper version of a normal steadicam arm, I'd probably buy it, if it was well priced.
BRAVO !!! BRAVO !!! AMAZING !! now where and when we can buy the full kit without me selling my kidneys
tilta.com/shop/tilta-float-handheld-gimbal-support-system/
Are there any plans to make a FLOAT system for other gimbals, like the Zhiyun Crane 2S or LAB?
why would they? those other gimbals.. meh.....
The Float only includes a mount for the RS2, but you can theoretically use any gimbal as long as you have a way to mount it via 1/4"-20 and 3/8"-16 threads and have a way to power it through a 2 Pin Lemo!
Does anyone have a preproduction unit and plan on posting a review of this bad boy? It is hard to find info on this setup other than this video.
If they made this including the batteries and an external monitor and lowered the price a bit it would be the end all to all gimbals. As of now you can build this same rig with the rs2 and flycam’s galaxy vest and redking and have the rig break down into individual other rigs.
Sure it can always be cheaper. But this is already the cheapest solution. Not counting DIY projects.
i have preordered my float system in december last year, it arrived two weeks ago. its working fine when using lightweight cameras like dslrs. but i still havn't figured out how to ballance heavier cameras like zcam or red komodo. would like to know how to mount the nato rail cross bars as well. there are very few pictures on the web and no manual at all and it is not demonstrated in the video
Please contact our support team about this!
support@tilta.com
@tilta is there a way to make the belt bigger maybe 50 to 55”?
Question! The Tilta float stays even when it is horizontally, but once it is straight up it keeps pushing back into the horizontal way. Any idea?
Does this work with the Zhyun Crane S3? Or does the partnership with DJI mean DJI-only accessories?
Im pretty sure its with dji only
@@daviddingdong2291 that's the most stupidest shit, plus i can make this for the zhiyun crane for half the price
The Float only includes a mount for the RS2, but you can theoretically use any gimbal as long as you have a way to mount it via 1/4"-20 and 3/8"-16 threads and have a way to power it through a 2 Pin Lemo!
@@AnimeZone247 Then make it for half the price lol. Why are you complaining? This is literally utilizing RS2 and its functionality with RavenEye so you're not running 5 feet cords to an external monitor...
@@AnimeZone247 I’m curious how you’d adapt this to the Crane 3. That’s what I’m looking into. Wanna compare and collaborate?
Also besides the phones are there any other monitors like 5" that can be paired with the Float/RS2 ?
The Phone Mount supports devices with a maximum height of 92mm!
Do you think it could be used as a regular steadycam with an fx9 ? I own a rs2, a7sIII and an fx9 and i thought it could be great to be able to use the fx9 on it also!
Yes! Although designed for gimbals, the Float can attach to any system via 1/4"-20 threads!
So is the float finally out yet? All i see are preorders.
hey 铁头! could you please send a unit to Jason Wang’s way at TLDR Filmmaker? We look to him a lot for gears in the Indie filmmaking world. We would really love to see him doing a review of this against the Thanos Pro II! 我们很想看他的测试和推荐这个 Tilta Float!
The current counterweight system seems to be poorly regarded by reviews. Is there a better counterweight system coming soon? Also, a vest system?
Is there a way to supply power to a RED Komodo from the sled? Or do you recommend using Canon BP batteries on the body? Can I mount a monitor/transmitter to the monitor bracket?
Yes! We'd recommend out Power Passthrough Plate for RS2!
You can use any cold shoe mount with the Float meaning you could mount an external monitor with a more traditional cold shoe to 1/4"-20 adapter:
tilta.com/shop/battery-plate-to-rs-2-power-pass-through-plate-kit/
tilta.com/shop/tiltaing-adjustable-cold-shoe-accessory-mounting-bracket/
hope you make a system for the Crane as well
This is compatible with any gimbal that can mount via 1/4"-20 and power by 2 Pin Lemo or internally!
太酷了
Imagine all these set up just for 2-3 shots
This may be a stupid question, but is the Nato rail on the bottom supposed to be in the kit. I've gotten to the part in the tutorial where you connect the vmount plate with a mini tripod on one side and then connect the pole to the top of the Vmount plate with a nato rail. But the Vmount plate that came in mine has a female nato rail receptor on the top. And the bottom of the rod has a female NATO rail receptor on the bottom. So, it's trying to connect a female NATO receiver to a female NATO receiver. It's almost like there's supposed to be some kind of double NATO rail device that lives between the bottom of the rod and the top of the Vmount plate. But I don't see anything else in the case that would serve that purpose. Am I missing a part that is supposed to connect the top of the Vmount plate to the bottom of the pole? Or, is there something obvious that I'm just missing?
So I didn't see him connect anything to the Tilta Float and his phone. How are you supposed to see what the camera sees without a cable.. live stream?
will this work with a Crane 3S?
This thing is sweet but man it seems like a pain in the ass to set up and balance.
Does the titla float connect to the Zhiyun Crane 3s pro? Love the Ronin Ecosystem, but am looking for something with a higher payload that the Ronin s2 but not as much as the Ronin 2. The crane 3s pro fits well with that and wondered if and how you can attach the Tilta float to the Crane 3s pro?
The Float is compatible with any gimbal that can mount via 1/4″-20 or 3/8″-16 threads and can be powered by a 2 Pin Lemo!
@@TILTA cool. Does the Zhiyun crane 3 mount with either of those mounts? Or can it be powered by a 2 pin lemo?
ugh... just at step 2 (attaching battery plate to the post) and doesn't work. It is not the same piece on my battery plate. Can anyone help with that? Thanks
same wtf
Booosh ordered. Going to run Shinobi instead of a phone though. My phone is probably too thicc for the holder haha.
won't work, connection is based on wifi bluetooth
@@onefingerproduction3180 Run a flexible/thin HDMI cable from the Pocket and custom mount monitor to the usual spot. You could probably split signal too with Blackmagic micro converter to have a personal monitor and RavenEye for client monitor.
Maybe a video “what is the float system” would be a good start. I have no idea what that was and subtitles for instruction videos aren’t the best plan of action.
Dear Tilta team. On the next days I´m going to purchase the Moza Aircross 2 gimbal + Moza Slypod E monopod slider. Is there an option to pair the Aircross 2 with this Tilta Float?
Unfortunately not at the moment, we hope to be able to sell parts of the float individually for use with other gimbals in the future if they are not able to be adapted to it.
@@jennahuskisson3335 I will be waiting for the adapter. Most users don´t necessarily work with DJI products, we will be glad if you release in the future some adapters for other gimbal models.
Great vid! gopro batteries.. so random haha
Gopro batteries are a quiet excellent move to be honest. With the old 18650 batteries like in the Nucleus series, the problem was availability due to shipping explosive goods, as well as charging via usb due to the need of more power. Gopro batteries on the other hand are pretty easy to get and distributed very well and you can get them in nearly every electronic store.
@@alexanderklose6942 Fair enough! availability is a great reason
Hi there. I have a controller that come with the tilta float system, but it seems to not work with my brand new rs3 pro. Is there a way to change that via firmware update? Or i have to buy a new unit?
In the info says RS2 Version 1.6
why not have a steadicam similar vest vs this sliding down the hips on an operator? Seems like a strange vest idea.
Steadicam vests need to be properly fitted for the operator, I'm guessing they went with this design as a one size fits all solution
Do you think this vest will fit comfortable??
@@marcotestani7589 hope so. The old tilta steadycam vest fitted pretty nice and was the best I ever used. 5 days of shooting straight with no pain. Hope this design is like the beltpart on the old one.
does this work with with the Benro xd pro? It's the two handled one.
This is compatible with any gimbal that mount via 1/4"-20 and power via 2 Pin Lemo or internally!
It doesn't look like the Benro XD Pro will work, but it may be adaptable! You will need to confirm this with Benro
I cannot get the thumb controller to control the focus dial on the RS2, what am I doing wrong? it is capable to pan and tilt, but when I turn the dial, nothing happens
Just need to think of an excuse to buy one... I know I don’t need it, but I seriously want one...
Cheaper then Steadicam
Does anyone know if this rig compatible with the crane 3s pro? If so I'm getting this tomorrow
The Thumb Controller is only compatible with the RS2, but the Float itself is compatible with any gimbal that can mount via 1/4"-20 and power by 2 Pin Lemo or internally so yes the Crane 3S Pro will work!
Does this only work with the RS2 gimbal or can I use MOZA air 2
This is compatible with any gimbal that can mount via 1/4"-20 and power by 2 Pin Lemo or internally!
Can i use it for RSC2?
Will this work with Zhiyun Crane 3s ?
The Float only includes a mount for the RS2, but you can theoretically use any gimbal as long as you have a way to mount it via 1/4"-20 and 3/8"-16 threads and have a way to power it through a 2 Pin Lemo!
Does that mean if I have a solution for that the remote will be compatible with the crane 3s pro?
is the Wireless Thumb Controller for RS 2 sold separately? and if yes, can you provide a link to it?
Please contact sales@tilta.com to order parts that are not listed on our website!
Gopro battery is included?
Check this out. from tilta.com
*The Wireless Thumb Controller requires a single GoPro Hero 5-8 Battery to power which is not included*
Probably not :/
Unfortunately no batteries are included!
When this was getting hyped duting the momentum production video days. I knew someone had to bring this out.titla great job man.. but the question is how am I gonna buy this. No money at all
will there be a new prototype that has build in gimbal and doesn't require an rs2?
Possibly, but there is no set word on anything like this at the moment!
The Float can be used with any camera or gimbal that connects with 1/4"-20 threads, powers internally or via 2 Pin Lemo and stays under the 10kg weight limit!
Are two V-mount batteries required, or can it be used with only one?
It can be used with only one, but it will make balancing more difficult!
Will this work on Ronin S?
Yes! You will need this Power Supply Baseplate!
tilta.com/shop/power-supply-base-plate-for-ronin-s/
Gopro9 電池不行嗎？
Good day! Can you help me, please. When I use Tilta Float, the vest puts a lot of pressure on the back, it is very uncomfortable to work. Is this normal or maybe I'm using it wrong?
Visit tilta.com/contact and we can troubleshoot this with you.
Please update tilta assistant for iOs 14, you abandoned your own gimbal G2X
Please update to ronin rs2 😭
The update will be coming very soon!
bgm是啥？
Does the Float enables 12V power output on the RS2 accessories ports?
The Float provides the same power as the RS2 Battery Handle!
@@TILTA BTW...Would be a form of respect for customers to come in front and tell them when they gonna receive their Float. People complaining on every forum, group i know. Best regards
As a Red Komodo owner I would like to see this utilized with the RED.
so buy it and use it?
@@ReadySetGoPictures cute. For someone who does research first before making a invested purchase is important. My concern is the SDI cable to the monitor and replacing the phone. If Tilta would like sponsor me with Gimbal I could try it and explain how sufficient it works in the professional cinema realm.
@@JeanLondonDia not sure why "cute" was in there. Typo? Yea I get that. I want a ptap as well as 2pin at the top. Looks like they're intentionally limiting the product to drive sales for their raven thing (not supporting accessories easily makes them sell their own accessories). Ill have to look at the 2pin power capabilities. Not sure why they have dual batteries but are plugging into power into just one. Makes me think its not running dual batteries.The system is like 95% there, but the 5% that its missing is crucial. Haha yea don't know if that would happen man (them sending products). Probably not going to be used in the "professional cinema realm". steadicam days are usually designed around the steadicam move, essentially meaning its their A-cam. Cinema realm isn't using a komodo as their A-cam. Higher end commercials, documentaries, shorts, etc, for sure. Cinema, probably not.
@@ReadySetGoPictures the reply was obvious, “so buy it and use it?”
Moving forward Red Raven is being discontinued if I’m not mistaken. I personally use the Red Komodo for fashion, beauty, and editorial commercial work. I am currently using the Red Komodo without the BP 955 batteries and balancing it on the RS2. The Dtap capabilities allows me to do so through 3rd party batteries.
I think it would be a great opportunity to show the range of things you could do with the product with the range of production you are looking to achieve. As products are becoming cheaper, this leaves limitless opportunities for creativity from DSLRs to Cinema cameras.
From social media content to short films and even maybe featured films. If you have the creative mind to make it happen it can.
I look forward to see how I could utilize this tool in my workflow to create amazing work.
Outside of that closed mouths don’t get fed.
@@JeanLondonDia Yea the raven got discontented a year or so ago, they definitely phased it out prior to the discontinuation, and the komodo is better as well IMO. Awesome man, its a powerful setup.
Absolutely. Ive used two Komodos on features already as additional cameras. They're great for cutaways and any light weight rigs, I don't think they'll replace A-Cams anytime soon, but they're a powerful tool.
Red has dropped a lot of bombs the past few years. The Komodo is a great win. I can't wait to see where they go with it.
Lightweight cameras means faster setups and use with less cumbersome gimbals (ie rs2 vs movi)
Can you do Javelin mode with this?
Of course!
Hi
Is there a delivery to Turkey?
If yes. How long does it take?
Are there any fees for delivery?
Please refer to our dealers list to find a reseller near you!
tilta.com/dealers/
Is it possible to use the Tilta support arm with an RS2 without the pole? I really just want support because handholding the RS2 is too heavy.
Yes theoretically you could do this with a 1/4"-20 to baby pin adapter!
@@TILTA Can you say more than theoretically? Is it not possible for you to test it in this configuration and confirm that it is possible? It is a lot of money for me to spend if it does not quite work.
When will these start shipping?
Roughly 8 weeks from now!
Please make it real, preordered in Italy ahahahah
Hi
All items shown in a video are sold in one package?What s price
Thanks,
The Float System comes with everything you need except for batteries and the gimbal. It is $1349 USD
@@TILTA but TILTA agent just wrote to me saying the price is 1199 USD.wtf
Hi, What is the price of this great system, please ?
$1349 USD
Dji第三代穩定器如果出來不知道會不會被割韭菜真的不知道要不要買這些東西