2020 Chrysler Pacifica Trailer Wiring Harness Installation
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- This video covers the wiring harness installation for Curt 59236 on a 2020 Chrysler Pacifica. Learn how to install the trailer wiring on your 2020 Chrysler Pacifica from a U-Haul installation professional. With a few tools and our step-by-step instructions you can complete the installation of Curt 59236.
To purchase this wiring harness and other towing accessories for your 2020 Chrysler Pacifica, visit www.uhaul.com/trailer-hitches...
ABOUT U-HAUL Since 1945, U-Haul has been the No. 1 choice of do-it-yourself movers, with a network of more than 21,000 locations across all 50 states and 10 Canadian provinces. U-Haul Truck Share 24/7 now offers customers access to U-Haul trucks every hour of every day through the self-service options on their Internet connected mobile devices. U-Haul customers’ patronage has enabled the U-Haul fleet to grow to more than 150,000 trucks, 112,000 trailers and 40,000 towing devices. U-Haul offers more than 581,000 rooms and more than 51 million square feet of self-storage space at owned and managed facilities throughout North America. U-Haul is the largest installer of permanent trailer hitches in the automotive aftermarket industry and is the largest retailer of propane in the U.S.
0:00 Intro
0:16 Tool list
0:21 Remove tail lights
1:20 Install wiring harness
7:39 Reinstall tail lights
7:57 Route power wire to battery
11:37 Install connector bracket
13:08 Outro - ยานยนต์และพาหนะ
I cannot believe he drilled a self tapper through the tail light pocket. Corrosion city. Also, expensive to get fixed. This is such a hack installation.
The description box would have been a great place to mention the length of wire needed for both the power and the right turn signal. Also, if you are using your own power wire and fuse link, then why buy the kit when two-thirds of it will not be used?
Fair assessment Javier, but it's included with the converter kit and we try our best to use what's provided as many people do not have spare parts for these kinds of installations.
Don't use a universal kit. Use the Curt T connector kit made for the Pacifica. That way you don't need to splice into the vehicle's factory wiring.
Thank you for the video. I have order this wiring for my Pacifica. But we are living in Germany and use a 7 or 13 pol connector. How can I connect this with the t connector? Thx
The Scotchlock splices are the wrong size for the current wire gage in the Pacifica tail lights. You need to use the red ones, not the blue ones. The blue ones don't reliably connect to the wires.
Also, the route for the power wire is not clear at all, and is very difficult to determine. Listed in the required tools should be ramps or jack stands, or you can't actually pull this off. Too much screen time spent on hands making connections that you can't actually see.
Why do you need to connect this positive all the way to the front engine? Didn't get this step
This is to provide power to the harness as LED tail lights do not provide enough power for the lights and the wiring harness together. If you have an unused power source in the rear of the vehicle like a charging port, you can tap the power wire directly into that. However, we recommend not using the power source for anything else if you connect the harness to it. And always make sure to still use the inline fuse if going this route.
@@trailerhitches what about the auxiliary battery in the back compartment of the pacifica on the drivers side?
Holy fire hazard, batman.
Good afternoon - Can you explain what you are seeing that you feel may be a hazard? All of our wiring kits include layers of protection including fuses, heat shrink connections, and industry standard practices. We would love to clear up any concerns.
I back my 18 Pacifica into the water for my jet ski I don't trust all that is actually waterproof
Those splice connectors and the crimps he did were terrible. And the routing of that wire was also terrible. Not professional at all.