Excelente, la mejor y práctica explicación que haya podido ver y escuchar. Felicitaciones profe, así es que enseña un buen profesional, gracias por su aporte, colaboración y dedicación. Desde Colombia, Cali capital del Valle del Cauca. Mi más sincero agradecimiento.
gracias por compartir este super vídeo me sirvió mucho para mi clase de mantenimiento de maquinas EXCELENTE lo compartí con mis compañeros de clase y me han dicho que esta super de nuevo EXCELENTE y feliz día.
Metalmecanica-facil igualmente Mario. Tu vídeo es genial, no sabía cómo utilizar el pie de rey en pulgadas, pero tu vídeo me fue de mucha ayuda, gracias Mario.
Gracias amigo, después de un rato fue que entendí, me costo un poco... pero aplique el método de copiar y leer lo que decías que no entendía y lo hice... muy buena la explicación.
Buenas noches desde España y gracias por los videos que haces, tengo una pregunta referente a las piedras de esmeril o muelas, para afilar brocas o mechas, repasar hierros etc. Que tipo de piedra se utiliza la gris o la blanca y para afilar los portaherramientas de metal duro y cuchillas de cobalto cual la verde de silicio , muchas gracias espero que me puedas ayudar ......
Hola, Para afilar las cuchillas de metal duro o cuchillas de carburo de tungsteno, hay que utilizar la muela verde, es una muela suave, que trabaja muy bien con el metal duro, no recuerdo muy bien cual es la referencia específica de la muela. Pero sí hay que observar una regla, que es: para trabajar metales duros hay que utilizar una muela tipo blanda, y para trabajar metales suaves, hay que utilizar una muela tipo dura. En internet se puede conseguir más información al respecto.
Excelente explicacion y enseñanza, no se por que no entre este video antes
Excelente, la mejor y práctica explicación que haya podido ver y escuchar.
Felicitaciones profe, así es que enseña un buen profesional, gracias por su aporte, colaboración y dedicación.
Desde Colombia, Cali capital del Valle del Cauca. Mi más sincero agradecimiento.
Muchas Gracias :D
Es usted un verdadero instructor. Gracias por sus aportes.
Es con el mayor de los gustos.
Es el mejor tutorial para entender los calibres con un pie de rey,muchas gracias, saludos
Muchas gracias.
Es un gran instructor muchas gracias
Hola, muchas gracias
Mire este video y es muy preciso
Muchas Gracias.
Me parece muy instrutivo y eficiente muy sinplificado lo felicito sr por su informacionn
Muchas Gracias!
Excelente tema Gracias por compartir sus conocimientos. Muchos Éxitos. 👍
Gracias a ti
Muy buena e interesante explicación nos enseña a ser mejores en todo gracias.
Muchas gracias.
que capo, Mario Alberto, me has salvado el parcial de la U, muchas gracias por compartirnos tu conocimiento y de esa forma tan clara, like y suscrito
¡Con mucho gusto!
Muy buena explicación , excelente gracias
Hola, muchas gracias
Lo mismo sería en 16 o en 34 o más en el mismo sentido creciente de los espacios diminutos
Muy bien ! , Perfecto
gracias por compartir este super vídeo me sirvió mucho para mi clase de mantenimiento de maquinas EXCELENTE lo compartí con mis compañeros de clase y me han dicho que esta super de nuevo EXCELENTE y feliz día.
Muchas Gracias a ti por compartir. ¡¡Felicidades!!
Excelente explicación, se me habia dificultado entenderlo en el salon de clase; pero ya aclare dudas con su video. Gracias
+Mariana Obregon, con mucho gusto.
Excelente explicacion , gracias por el aporte . Saludos
Con mucho gusto.
muchas gracias Sr Mario muy agradecido soy de Venezuela
+Victor Arambulet, Con mucho Gusto, Saludos desde Colombia!
Excelente video me fue de mucha ayuda muchas gracias
Con mucho gusto.
Metalmecanica-facil igualmente Mario.
Tu vídeo es genial, no sabía cómo utilizar el pie de rey en pulgadas, pero tu vídeo me fue de mucha ayuda, gracias Mario.
De verdad que es una pagina de las mejores para aprender muy fácil.
Muchas Gracias!! :D
esta era la explicacion que buscaba de tantos videos muy bueno este video gracias por compartir su enseñanza
+Mario Vega , es con el mayor de los gustos!!
Excelente material. gracias por compartir.
Bastante útil la información y bien explicada .
Muchas gracias.
Gracias excelente explicacion me ayudo mucho
¡Con mucho gusto!
Te pasaste lo máximo amigo. ya podre acotar correctamente mis planos.
Con mucho gusto!!!
Excelente tutorial. Muy didáctico, ilustrativo. Gracias desde Vzla.
¡Es con mucho gusto!
Gracias, tu video es muy bueno, tienes habilidad para ensenar. Me sacaste de una dificil, asi que te agradezco
+Hector B. Colmenares, Gracias a ti,
Los explicaste tan bien que yo le entendí, o sea bravo te haz ganado un un like y suscriptor mas creo que así se dice...
+Julius lewandowski , que bueno, muchas gracias.
Muy valiosa su explicación gracias por compartirla
Con mucho gusto.
MUY BUEN VIDEO GRACIAS AHORA SI YA ENTENDI EL PIE DE REY.
Con mucho gusto!
Maestria y didactica,exelente !!,
Muchas gracias.
Excelente video facil de entender sin tanta complejida
Muchas gracias.
Excelente video, muy sustancioso y de gran ayuda en la lectura del Vernier o Pie de Rey...Saludos desde Venezuela
Un saludo para ti también, y muchas gracias,
Excelente vídeo,claro y directo.
Muchas Gracias.
Gracias amigo, después de un rato fue que entendí, me costo un poco... pero aplique el método de copiar y leer lo que decías que no entendía y lo hice... muy buena la explicación.
Si, a veces hay que revisar varias veces la información con el fin de entenderla, estudiarla y aplicarla. Gracias por tu buen comentario.
felicitaciones por el vídeo,lo veré varias veces asta entenderlo bien con el vernier en la mano.lo saludo desde Colombia la linda .Cahetano .
+Caetano G., si, para aprender a leer el vernier en fracciones de pulgada solo basta practicar y practicar.
Me ayudo mucho con los gráficos me hizo entender mejor
Que bueno, es con el mayor de los gustos.
te pasastes, ufffffffffffff por fin un profen bacan chvr , grxs
Gracias, Con mucho gusto.
buen video me sirvio
Que bueno, es con el mayor de los gustos.
Agradecido, informacion muuuuuuuy necesaria.
Muchas gracias.
Es muy bueno el vídeo ya entiendo más este tema
¡¡Que bueno, Con mucho gusto!!
Excelente explicación, muy pedagogica
Muchas Gracias!!
Excelente ayuda para los aficionados como yo, a las medidas.
Con mucho gusto.
Muy valioso esto q dios te bendiga
Muchas gracias.
gracias por sus conocietos expuestos me gusta aprender mas sobre medidas micrometicas y mas
+Victor Arambulet, por el momento sólo tengo un video que explica como leer el micrómetro en pulgadas: th-cam.com/video/hVzRBVo94_Q/w-d-xo.html
osiiimon lo q no entendí en la clase ahora lo entendí XD XD gracias broo 😎✌
Con mucho gusto.
Estudio. Ingeniería y estoy en la proseso de aprendizaje gracias y estaré pendiente
¡con mucho gusto!
Excelente, gracias
+Martin Parra (Marpar), Con mucho gusto.
Excelente vídeo, muy bien explicado. Saludos
Mchas Gracias.
Gracias por la explicación amigo
¡Con mucho gusto!
Excelente vídeo, saludos desde Colombia
Con mucho gusto.
Gracias por la explicación
¡con muchísimo gusto!
Excelente explicacion, con gran detalle.
Muchas Gracias.
Exelente explicación felicidades vien esplicado
Muchas Gracias.
¡Muchas gracias!
Con mucho gusto
muy didáctico, gracias por compartir. Saludos!
Muchas Gracias
Excelente explicación felicidades.
Carnal me ayudaste un montón, con esto si saco 10 en mi examen práctico
Esperemos que saques 11 :D
exelente . estoy empezando a entender el pie de Rey me sirve mucho gracias
+José Sánchez , Que bueno que te sirva.
+Metalmecanica-facil ya me suscribi a tu canal para estar al tanto de esos videos
ok.
Excelente video, Muchas gracias.
con mucho gusto.
me fue de gran ayuda tu video. muchas gracias!
+Gekka Medina , con mucho gusto.
Me encantó la explicación, felicidades y gracias, luego en milímetros por favor.
th-cam.com/video/dHAQbMzJBnU/w-d-xo.html
excelente vídeo por fin entendí gracias..
Que bueno, es con mucho gusto.
muy util, didactico
Es con mucho gusto.
Muy interesante y yamativos los números y muy bien esplicados
Muchas Gracias.
gracias por la explicacion
Con mucho gusto.
gracias . muy buena la explicación
+samyr kaleb martinez perez, con mucho gusto.
muy bien excelente video
¡Con Mucho Gusto!
ok gracias
muy didáctico, gracias por compartir
+Frank Manrique, Con mucho gusto!!
muy buen material.
Muchas gracias
buen vídeo si se entiende todo claro gracias
+leonardo celis, Que bueno que te sirva.
muchas gracias me ayudo muchisiimo tu video
+jorge orellana , con mucho gusto!
Exelente video ...
+harold guzman, con mucho gusto!!
Muchas gracias me acabas de ayudar mucho
Con mucho gusto.
casi nunca doy likes pero tu video si me ayudo
Muchas Gracias por tus likes
super, muchas gracias.
Con mucho gusto!
excelente muchas gracias
Con mucho gusto.
uy mucha información para un pie de rey, primera vez que veo una explicación de esto man
Muchas gracias
Con mucho gusto.
si excelente material gracias.
Con mucho gusto.
Exelente video de vernier...
+orange flores, con mucho gusto!
Excelente explicación
+Boris JCP con mucho gusto.
Interesante saber todo el uso pie de rey
Gracias por tu buen comentario.
Gracias muy bien explicado
+skool117, Gracias por Comentar, muchos éxitos!!
Amigo, muy bueno el video. Explicas claro y conciso
+Mario Hernandez, Que bueno que te quedó claro, ¡gracias por comentar!
Hola que buena esplicasion
Hola, muchas gracias
excelente me sirvió de bastante ayuda
Qe bueno, es con el mayor de los gustos
Excelente amigo !
Con mucho gusto.
Gracias por tu explicación, Mario. Me suscribiré a tu canal.
Con mucho gusto!
Buenas noches desde España y gracias por los videos que haces, tengo una pregunta referente a las piedras de esmeril o muelas, para afilar brocas o mechas, repasar hierros etc. Que tipo de piedra se utiliza la gris o la blanca y para afilar los portaherramientas de metal duro y cuchillas de cobalto cual la verde de silicio , muchas gracias espero que me puedas ayudar ......
Hola,
Para afilar las cuchillas de metal duro o cuchillas de carburo de tungsteno, hay que utilizar la muela verde, es una muela suave, que trabaja muy bien con el metal duro, no recuerdo muy bien cual es la referencia específica de la muela.
Pero sí hay que observar una regla, que es: para trabajar metales duros hay que utilizar una muela tipo blanda, y para trabajar metales suaves, hay que utilizar una muela tipo dura.
En internet se puede conseguir más información al respecto.
Muy buen vídeo amigo manito arriba.
+luis orlando. orlando, muchas gracias.
muy buenas su explicación y lectura espero ver las explicaciones en milímetro y centímetros
Muchas Gracias.
Para la lectura del pie de rey en milímetros, por favor diríjase a: th-cam.com/video/dHAQbMzJBnU/w-d-xo.html
Excelente video
Con mucho gusto.
Buenisimo.
Muchas gracias.
Excelente información. ... Gracias
Con mucho gusto.
excelente. solo agrego que para mejor entendimiento se debe hacer una tabla con los valores para cada fraccion del nonio.
+joravaal v, gracias por comentar.
Excelente explicacion
con el mayor de los gustos.
Bien me sera esto de mucha uctilida en mis examen
De seguro que sí.
Gracias ahora si apruebo mi examen.
Claro que sí.
Gracias por comentar.
Gracias.... Ahora si entendi
Que bueno, es con el mayor de los gustos!
buen, vídeo todo muy claro.
+Jesús Marcos, Con mucho gusto.
explicacion perfecta
+Gabriel Rios, Con mucho gusto
excelente explicacion.
como se realiza una conversion de coordenas rectangulares a coordenadas polares????
saludos..
Siendo xy las coordenadas rectangulares, entonces el valor de r= sqrt((X^2)+(Y^2)) y tetha= arc tan (Y/X)
Ok
Te agradesco la atencion y los tips que nos pasas a todos los que nos gusta este gran trabajo.
Saludos..
+miguel angel garcia chichia, con gusto!