1 year on and you have saved me going to the main stealers 50notes for the part and 10mins to install. Longest part is getting the plastics back on. Thanks again for the video.
I just changed mine and it's way easier if you reach with your fingers through the round hole in the body and the boot light after taking off the clip-on trim that holds it in place. A 5 minute job without prying open all that trim.
Hi guys who are doing this fix yourself. I just tried it and it’s actually possible to accomplish by removing just the fuel door housing. But it requires a lot of blind touching and feeling where the socket is. Long and thin fingers do help a lot. My fingers are thin but not exactly long. Watching this video to find out the position of the socket does help a lot! Quite easy to remove the switch just by blind touching, tough part is putting it back blind because of angle issues and having to aim the socket blind. Definitely gonna take very long and many tries, but it’s not as tiring to remove the inner panels. And putting inner panels back has its own troubles when the clips will not be in place altogether when u smack them in, and once u miss any of them and it bends (especially the inner ones), it gets extremely troublesome and tiring to reinstall the panels. Good luck with anyone trying!! I got bored and replaced it although I dint really have to (it spoilt while it’s on ‘open’ mode so it can still open and close normally, just unable to lock), and eventually realised its not worth the effort at all 😂 but 1 more diy completed!
I think its also worth mentioning not to use any electric tools such as aku drills to unscrew the screws to avoid sparks near the reservoir, specially if its a gasoline car.
You can actually just remove the plastic cap by pulling it to the right when it is still closed. Now you can pry it open from underneath with a screwdriver, which will break the motor, but that doesn't matter since it is already broken. Your fuel door will remain intact, that is more important.
Very Helpful video! My actuator is off. One question: Instead of open the panel inside the car and unplug it, can i cut the old cables and put it togheder with the new ones from the outside, could it work?
Glad you think so 👍 Nope as you have to disconnect the electrical plug, you cannot do that from the outside (you would only damage something). Best of luck 👍
I’ve somehow got a 4 pin connector but I can’t find any information about it and even searched the part number itself but still I can only find the 2 pin connector. You got any info about this?
Do you have any part number for this? I've managed so far by filing down and lubing the guiders. Also rapidly unlocking the car and pushing on the lid has helped. But this seems inevitable. Good video!
@@kildareemanMy OBD Elev device acually listed this as "Tank lid activation" error way before i noticed this as being a problem for my GTI CS at gas station today. Thanks alot for awesome video! Saved to my service videos! 👍
1 year on and you have saved me going to the main stealers 50notes for the part and 10mins to install. Longest part is getting the plastics back on. Thanks again for the video.
This videos gonna age like a VERY fine Wine! Just saying! Thanks for all the work! Really instructive video! 👍
I’m so glad that VW don’t make their fuel filler covers unnecessarily complicated 🤗
I just changed mine and it's way easier if you reach with your fingers through the round hole in the body and the boot light after taking off the clip-on trim that holds it in place. A 5 minute job without prying open all that trim.
Thanks, that saved me breaking anything unnecessarily 👍🏻
My tiguan does not have the screw.... It sucks to remove. These small problems do not happen on Japanese cars.
Hi guys who are doing this fix yourself. I just tried it and it’s actually possible to accomplish by removing just the fuel door housing. But it requires a lot of blind touching and feeling where the socket is. Long and thin fingers do help a lot. My fingers are thin but not exactly long. Watching this video to find out the position of the socket does help a lot! Quite easy to remove the switch just by blind touching, tough part is putting it back blind because of angle issues and having to aim the socket blind. Definitely gonna take very long and many tries, but it’s not as tiring to remove the inner panels. And putting inner panels back has its own troubles when the clips will not be in place altogether when u smack them in, and once u miss any of them and it bends (especially the inner ones), it gets extremely troublesome and tiring to reinstall the panels. Good luck with anyone trying!! I got bored and replaced it although I dint really have to (it spoilt while it’s on ‘open’ mode so it can still open and close normally, just unable to lock), and eventually realised its not worth the effort at all 😂 but 1 more diy completed!
Thanks. You showed it well.
I think its also worth mentioning not to use any electric tools such as aku drills to unscrew the screws to avoid sparks near the reservoir, specially if its a gasoline car.
Yeah that’s very true, gasoline(or Petrol) is extremely flammable! Always take care folks 👍
You can actually just remove the plastic cap by pulling it to the right when it is still closed. Now you can pry it open from underneath with a screwdriver, which will break the motor, but that doesn't matter since it is already broken. Your fuel door will remain intact, that is more important.
Thank You VERY MUCH !!!
Very Helpful video! My actuator is off. One question: Instead of open the panel inside the car and unplug it, can i cut the old cables and put it togheder with the new ones from the outside, could it work?
Glad you think so 👍 Nope as you have to disconnect the electrical plug, you cannot do that from the outside (you would only damage something). Best of luck 👍
Thanks. I enjoyed watching carefully. It looks like it's possible for newbie.
Good lad
Thank you
Good video giving it a good clean has worked for me but will probably need to replace it eventually
Don't force it off!
Knock on the lid and unlock and lock the doors.
With a bit of luck it will then pop open.
I tried but had no joy! Was almost hammer time 😂
I’ve somehow got a 4 pin connector but I can’t find any information about it and even searched the part number itself but still I can only find the 2 pin connector. You got any info about this?
What model and year is your car?
Golf 7 GTE 2015
Do you have any part number for this? I've managed so far by filing down and lubing the guiders. Also rapidly unlocking the car and pushing on the lid has helped. But this seems inevitable. Good video!
I give the part number in the video 👍
Mine makes a click but wont open the gas door even rear left door sonetines wont open by the remote
Video is about gas door that won't open.
Starts video with gas door open.
Except the fact, that I can’t even open it to replace it…
In the same situation now. 😅
The joys 😅😅🤣🤣
Not the only one brother
@@kildareemanMy OBD Elev device acually listed this as "Tank lid activation" error way before i noticed this as being a problem for my GTI CS at gas station today. Thanks alot for awesome video! Saved to my service videos! 👍
@@tredfxman that’s interesting! Mine was going for awhile and then one day I couldn’t put diesel in the car 🙈🙈😂 Glad you enjoyed it 👍
Range rover évoque
???
Hotel 🏨 UD barokah emas yang telah disatukan menjadi sebuah kebutuhan fusi.
Tu hi Rab tu
6627. $
Thanks. Very nice video. NICE work with the camera too. Very good information for us with a VW 😊