You dont want to put anything in the motor to block the piston... you can use a 13mm socket on the opposite side to hold the clutch from moving. This will prevent any damage to the piston
Hey there, great video. When I tried this technique it worked to push the tab back, but then sprung right back to where it started. Does it every time and wont click in. Any ideas? Thanks!
You dont want to put anything in the motor to block the piston... you can use a 13mm socket on the opposite side to hold the clutch from moving. This will prevent any damage to the piston
You can put a piece of nylon rope in there it wont hurt nothing or like he used a rubber piston stop
Its happen to me. I destroy the conrod.
What about oilpump drive lubricating? Not neccessary?
yes, it's not necessary, but if you consider putting a little grease it won't hurt
@@tusheeNaydenov I am in a dilemma which is better, a clean but dry surface or a dirt trap with greasing.
Very professional snd educational work!!! Good job
Thank you very much!
Hey there, great video. When I tried this technique it worked to push the tab back, but then sprung right back to where it started. Does it every time and wont click in. Any ideas? Thanks!
Kako je moguće da se uljna pumpa blokira od piljevine zar nema plastična zaštita sa druge strane
Cleaning the parts not necessarily. 😳
Definitely needed a good cleaning
очень грязно - мог бы хотя бы продуть.