yo! I cant find billsteins for the 19 durango. i need to replace mine. I have the lower spring kit as well. Can you send me the link where you bought them?
@@danielwright5031 a.co/d/azqUQku for the shocks. You’ll need new upper mounts if you have the LL shock mounts, they won’t work. At least thats what I did.
@@danielwright5031 a.co/d/iae2Ir8 those are the mounts I used. Says they don’t fit the Durango, which is true unless you do the Bilstein swap then they do.
If it weren’t lowered, it wouldn’t rub. It also wouldn’t rub if I were to get a 35 series sidewall instead. A lot of people do that route, but honestly, the rub isn’t all the time. Its when heavily loaded down, and driving over aggressive bumps.
Hey man, love the content. When you removed the load leveling did you use your suspension dampening ability? I’m trying to find info on this but can’t. I want to go eibach but can’t find out about loosing dampening
Are you talking about the Bilstein shocks versus LL shocks? If so the Bilsteins have no adjustability. It rides just as good as it did before. If you end up taking your LL off let me know, looking for a set for a project I am working on.
@@MK6Guy well so I have a 392 srt and I’m looking at the eibach kit. And they claim I keep my dampering settings but then I want to change out the load leveling so it drops fully. and I’m wondering if that would effect my suspension dampering settings, so track being stiff and touring being soft
@@colinmcdonald6819 Gotcha. The RT platform at least mine does not have that adjustability. I would message KOWPERFORMANCE on IG. He is a dealer for Eibach. Best Mopar Rep alive, extremely helpful and amazing seller. Tell him I sent you.
Hey Wu man I just lowered my srt Durango about a week ago how long do the springs take to settle about ? My front is pretty low but my back is not As low as I would like yours sits perfectly
Any drone? I did a resonator delete and slap a straight Blastin bob straight pipe. Planning to delete the mid muffler and replace it with a X-pipe to get a deeper growl tone, or I will get drone on this build?
It will give some drone. My opinion, if you don’t want noise or drone, leave it stock. Modifying always has its pros/cons. I love it and will probably be doing longtube headers soon.
I had a 2019 ram with the 5.7 in it and yours sound exactly like it. I just did the same thing with my exhaust on my 2022 Durango R/T and it sounds like a clapped out Chevy when I get on it. Did you go with the stock 2.5 diameter pipe or go bigger?
HAHA dang that sucks. I believe its the 2.5" OE size. I want to go full 3" to get more flow, eventually. You had an x-pipe put in place of the center muffler?
I will have to do some digging on my Amazon purchases. I know they were the B6 4600 Series, but not too sure on Part number. I will try and find it for you.
Do a f@&$in burnout bro! Keep doing you bubba we support you here in the dirty south and look forward to future post!! #adamspolishes #alanjay #ToyotaServiceThisIsErik
I did all the exhaust and didn’t take long to get sick of the sound. Now have the Xpipe and 2x 12” bottle resonators and still not satisfied and NO to Borla no thanks
Answered my own question by going through your page. 🔥🔥🔥
Where abouts in florida brother? I am in Brevard county! love the rango
Sebring area, thanks!
Just got a 2022 Rango RT... got the muffler deleted already, wanted to keep factory wheels but put 10" tires on them and I like the dropped look.....
Anyway you can send a link to the shocks ? I can’t find anything that fits my 18 Durango rt
yo! I cant find billsteins for the 19 durango. i need to replace mine. I have the lower spring kit as well. Can you send me the link where you bought them?
@@danielwright5031 a.co/d/azqUQku for the shocks. You’ll need new upper mounts if you have the LL shock mounts, they won’t work. At least thats what I did.
@@danielwright5031 a.co/d/iae2Ir8 those are the mounts I used. Says they don’t fit the Durango, which is true unless you do the Bilstein swap then they do.
@@MK6Guy The stock mounts dont work. so you gotta use these?
@@danielwright5031 Yes. Hardware is reusable to install them as well
@@MK6Guy I dont think I have ll shocks, i look yesterday. I have a 19 durango rt blacktop with the towing package but i dont I see ll shocks.
How bad is the rub in the rear? Do you think it would still rubbed if it wasn’t lowered?
If it weren’t lowered, it wouldn’t rub. It also wouldn’t rub if I were to get a 35 series sidewall instead. A lot of people do that route, but honestly, the rub isn’t all the time. Its when heavily loaded down, and driving over aggressive bumps.
@@MK6Guy that was helpful I’m just trying to stay away from 35 because of the ride but my truck isn’t lowered so I should be good
You go mopar or eibach bump stop on the rear
Factory bump stop, Bilstein upgraded rear shocks.
Hey man, love the content. When you removed the load leveling did you use your suspension dampening ability? I’m trying to find info on this but can’t. I want to go eibach but can’t find out about loosing dampening
Are you talking about the Bilstein shocks versus LL shocks? If so the Bilsteins have no adjustability. It rides just as good as it did before. If you end up taking your LL off let me know, looking for a set for a project I am working on.
@@MK6Guy well so I have a 392 srt and I’m looking at the eibach kit. And they claim I keep my dampering settings but then I want to change out the load leveling so it drops fully. and I’m wondering if that would effect my suspension dampering settings, so track being stiff and touring being soft
@@colinmcdonald6819 Gotcha. The RT platform at least mine does not have that adjustability. I would message KOWPERFORMANCE on IG. He is a dealer for Eibach. Best Mopar Rep alive, extremely helpful and amazing seller. Tell him I sent you.
I’m looking for some legit new exhaust tips for a 22 RT but can’t find anything … do you have any? Thanks
I haven’t upgraded mine yet, but when I do, I’ll be buying Carven 5” tips. They fill in the exhaust cutouts perfectly.
@@MK6Guy I heard that they can melt the housing for the tips cus they’re too big?
Hey Wu man I just lowered my srt Durango about a week ago how long do the springs take to settle about ? My front is pretty low but my back is not As low as I would like yours sits perfectly
Does yours have the Load Leveling shocks in the rear, or standard shocks?
May just be the sound I need to get my neighbors to move out
Okay lol
Any drone? I did a resonator delete and slap a straight Blastin bob straight pipe.
Planning to delete the mid muffler and replace it with a X-pipe to get a deeper growl tone, or I will get drone on this build?
It will give some drone. My opinion, if you don’t want noise or drone, leave it stock. Modifying always has its pros/cons. I love it and will probably be doing longtube headers soon.
I had a 2019 ram with the 5.7 in it and yours sound exactly like it. I just did the same thing with my exhaust on my 2022 Durango R/T and it sounds like a clapped out Chevy when I get on it. Did you go with the stock 2.5 diameter pipe or go bigger?
HAHA dang that sucks. I believe its the 2.5" OE size. I want to go full 3" to get more flow, eventually. You had an x-pipe put in place of the center muffler?
How different is the ride with the Eibach springs ?
Slightly stiffer then stock
@@MK6Guy Not too drastic ?
@@b.a.cichlids3827 Not in my opinion.
You have a link for the rear shocks?
I will have to do some digging on my Amazon purchases. I know they were the B6 4600 Series, but not too sure on Part number. I will try and find it for you.
How long did it take for your springs to fully settle?
I’d say about a week, maybe week and a half
How did you change out that Dodgee grill emblem for the RT grill emblem?
Its a bracket on the backside can be unbolted
What mounts did you use for the bilstein shocks? Did you use the ones for the load leveling shocks or did you get a different mount?
I had to use a replacement mount, believe it was from Dorman.
Aye does your shocks make noise when hitting a bump
Nope
is that back light sprayed or did you use tinted film??
Film from Luxe Auto
What tint percentage is that?
5 all around.
@@MK6Guy damn bruh!! I need to tint the back window 5% thanks bruh
Wat brand X pipe?
Local exhaust shop used 304 stainless when they made it.
Do a f@&$in burnout bro! Keep doing you bubba we support you here in the dirty south and look forward to future post!! #adamspolishes #alanjay #ToyotaServiceThisIsErik
I did all the exhaust and didn’t take long to get sick of the sound. Now have the Xpipe and 2x 12” bottle resonators and still not satisfied and NO to Borla no thanks
Modifying the exhaust isn’t for everyone. 🤷🏻♂️. Going on 2yrs with this setup and I would never change it aside from getting Longtubes down the road.
285/40 22 works better unlowered if you dont want rubbing. Lowered is for 20"
285/40’s on Eibach springs are perfect for the no wheel gap look haha.
Curb rash is just a poorly executed polished face lol
Curb rash is the devil.