Part 2 RC Car with Suspension System Assembly and Motion Study Tutorial in Solidworks
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Assembly and Motion Study Tutorial of RC Car with Suspension System in Solidworks
This is a Model RC Car design, which includes only those parts which are required for creating a motion study analysis in Solidworks. This design doesn't includes Electrical Components.
Part 1 RC Car with Suspension System All Parts Design tutorial in Solidworks
• Part 1 RC Car with Sus...
Here are the Time Stamps:
1:45 Assembly Starts
45:33 Motion Study
Hope You like it.
Do Share Your Opinion in the Comment.
Thanks for Watching.
Do Like Subscribe & Share.
Stay Connected for Such Designs & Tutorials.
Thanks bhai
Ye video great thi kafi kuch sikhne ko mila and I also completed this project
Thanks a lot for uploading such great tutorials 😊
Most welcome 😊
Bhai motion study me error aa ra h kese solve Kiya
Please help..
Thank you
Bhai motor and bracket assembly JB Maine assembly k liye la rahe hai to Uske connecting bars fix ho ja rahe hai what to do
Maine sb Kar liya still connecting bars free move Nahi Kar rahe Maine assembly me
Make the Motor and Bracket Sub-Assembly 'Flexible' like did at 28:21, then the connecting bar will move freely
@@SolidworksFunPraveenSingh sir I have SOLIDWORKS 2012 premium and that option is not available in it . Can u tell me how to do it from somewhere else
it is available in SW 2012 also, it is the basic feature of solidworks assembly that is found in every version of SW.
Right Click the SubAssembly-go to component property-In Bottom Right Corner- go to solve as- Check the 'Flexible' from there
@@SolidworksFunPraveenSingh thanks
Excellent video friend Praveen Singh, this channel is among one of my favorite channels to learn about the management of Solidworks, follow and Blessings for you ... Greetings from Venezuela ...
thanks a lot!!
glad to know that you like the channel's content.
Thanks!
@@SolidworksFunPraveenSingh Praveen, I am having problems with the motion analysis, you will have an email where I can send you what I do to see where the fault is ... I am sure I have carried out all the steps explained
@@SolidworksFunPraveenSingh Hello Praveen, ready sent the file in advance, thank you very much for your support and sharing your knowledge...
Problem which you faced at 38:01 , I faced a similar issue in Rocker Bogie suspension car. Tie rod is unable to mate with platform on both ends , it says they are not concentric. However the dimensions are perfect. What to do?
From 38:26 the solution is shown.
The Solution is " put every parts of the shock absorber assembly in FLOAT Condition "
@@SolidworksFunPraveenSingh can I do the same with Tie rod in Rocker Bogie mechanism car??
yes.
Please see that tutorial for detail.
how does it steer???anyway great great work
by turning one side wheels in opposite direction than the other.