Gear profile by Base Circle method in hindi|Engineering And Poetry|

Hello friends in this video explain the method of how to draw involute profile of spur gear by Base circle method or construction of Gear Teeth using Base circle as a Basis of construction.
Engineering drawing
Machine drawing
#gear_profile_by_base_circle
#gear_profile
GBPIT
There is given some important definition:-
Pitch circle:- It is an imaginary circle which by rolling action would give same motion as the actual gear.
Addendum circle:- It is the circle drawn through the top of teeth and is concentric with pitch circle.
Dedendum circle:- It is the circle drawn through the bottom of the teeth. also called tooth circle.
Module:- It is the ratio of pitch circle to no. Of teeth.
Here is the linke of my previous video:-
Gear profile by Approximate method
• How to draw Gear profi...
Efficiency of Otto cycle deri derivation
• Otto cycle:- Efficienc...
Efficiency of diesel cycle derivation
• Diesel cycle :- effici...

[@bharatchandra7944]

Sir you explained step by step clearly. love you. Thank you.

[@engineeringandpoetry]

Ooh great 😇 & thanks

[@Madeinhimalayas143]

Thank you sir now i can easily pass my exams ❤

[@logical458]

oh ho .

[@engineeringandpoetry]

Ooh great 😁

[@vanshsinghal4676]

❤❤

[@RED-ze1lc]

❤

[@raquibsiddiqui2228]

Badia samjhaya sir apne

[@engineeringandpoetry]

Thankyou. satay connected 🤗

[@huhufbez]

100% unbreakable 😶

[@nandaniprajapat6637]

Thanku sir ji

[@engineeringandpoetry]

Welcome 😁 stay connected 🤗

[@saifalikhan2874]

Thanks sir for teach a wonderful lesson 🥰🥰🥰

[@engineeringandpoetry]

Stay connected 🤗

[@vishwasmore7185]

Dop dimensions over pin ...gear Ko pin se size kaise nikale uska video bana do...ye video kisine nahi banay...Abhi ka video bahot useful he..

[@engineeringandpoetry]

Thank you☺️ and i will be upload it soon

[@rahul_shrivastav_01]

👍

[@vipinahlawat7123]

Very good it really help me in exam..than k u

[@vipinahlawat7123]

Please tell tracing paper method also🙏🙏🙏

[@engineeringandpoetry]

Ooh great 😇 and thanks for your valuable comment.

[@engineeringandpoetry]

@@vipinahlawat7123 when your exam??

[@vipinahlawat7123]

Day after tomorrow

[@engineeringandpoetry]

Hopefully i will be upload tomorrow.

could you please tell why the angle is 20 degree please? does it work for every gear or only gears with this numbers of tooth? Thank you for answering

[@engineeringandpoetry]

By this method prefer pressure angle 20° and It reduces risk of undercut , reduces interference, due to increased pressure angle compared to 14.5°, the tooth becomes slightly broader at the root. This makes tooth stronger and increases load carrying capacity. Conversely for 14.5° pressure angle gear gives quietness of operation. Stay connected 🤗

[@geetamchauhan1644]

Thnks bro 🙃

[@engineeringandpoetry]

😊

[@Elitegirl_gaming]

Sir MD kis parkaar set krna huta h
Jisse ki MD me kam se kam error aaye or
Konsa MD hamare liye sahi

[@namansarao35]

Sir ye unwin method hai kya

[@choudharygaming8225]

Sir isma teeths 25 bnane the

[@barjinderkumar8933]

I need your help sir pls reply me

[@engineeringandpoetry]

Ohh sure

[@ishanaggrawal7688]

Bhai itna akad ke kyu padha Raha hai