So far the three or four videos I have watched plus the official Pioneer operation manual does not explain how to adjust spearkers from front to back or side to side. thank you Bob
The Fader control is used to adjust the sound from front to back. The Balance control is one of the settings used to adjust the sound from right to left. Here is an Audio Settings video showing your how to operate both: th-cam.com/video/hiDOCp75UAI/w-d-xo.html You did not mention what Pioneer receiver you have so I can't point you to more videos specific to your receiver. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/icdWHqbS-7o/w-d-xo.html and you can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? This is an easy Seek setting change in the radio. Change the setting to MAN. You have it on PCH now. You can see this demonstrated in a How To video from Pioneer here: th-cam.com/video/b7Baainh0X4/w-d-xo.html Please watch the video with the sound on. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
You can find a full playlist of How To videos from Pioneer about audio receivers here: th-cam.com/video/42EL_JGXcJs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Pioneer in-dash receivers require an external AM/FM antenna in order for your to tune in any radio signal at all. Without an antenna, there is no radio reception. The 1999 Honda Civic had a retractable antenna, You may want to replace it. Here is one possibility: www.metraonline.com/part/44-HD98 Or you could go to an auto parts store and buy a generic auto antenna similar to this one: www.amazon.com/Herdio-Waterproof-Antenna-Flexible-SPA-Black/dp/B073W5V6BG/ref=sr_1_14?keywords=car%2Bantenna%2Bruger&qid=1637070596&qsid=139-4068062-9125830&sr=8-14&sres=B09GTZD2FL%2CB07VWS9V5S%2CB08R847MV4%2CB08DH7QS5Q%2CB076J1W2SV%2CB0002BEQN4%2CB07CNMDTY8%2CB08GL728J7%2CB08JPYWDMG%2CB073W5V6BG%2CB07R7RCRW9%2CB07PJX5611%2CB07TV22D4W%2CB0813968N2%2CB08R875SBX%2CB00009UHJS&srpt=ANTENNA&th=1 Install this antenna on the vehicle or hidden in the dash. If you install the antenna hidden in the dash you'll get some radio reception, but not great. The best place for the antenna is outside the vehicle in a vertical position. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Thanks I just ordered the universal hidden antenna from Ebay. I truly appreciate you guys for replying back to me. Hope y'all are enjoying your day.
The US FM radio spectrum uses 87.9-107.9 MHz range in 200 kHz steps (meaning that all of stations end in all-odd numbers only - 0.1, 0.3, 0.5, 0.7, 0.9 MHz), while here in the Philippines we're using 87.5-108.0 MHz worldwide-standard frequency spectrum, but mostly we're using 50 kHz spacing, e.g. 87.50-108.00 MHz, despite the Philippines also ends in odd numbers.
Please note, the product in the video above is the Pioneer DEH-S4000BT designed and manufactured for the North American market. I recommend that you use Pioneer products designed for your area. While many operations will be the same for the product shown in the video, and the products designed for your area, there will be small differences like the FM frequency steps you noted. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
As of 2022 June, Pioneer does not offer a shortwave in-dash receiver in the North American region. I'm not aware of a Pioneer receiver that receives shortwave in other regions of the world. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Good clear video. Very helpful. However, I can't read the display during the day unless it's very overcast. I have no idea what station I'm on or what FM band. Can I make it brighter?
What is the model number of your Pioneer in-dash receiver? You may have the in-dash receiver's dimmer on. This dims the lights for night time driving. Did you connect the receiver's Orange wire with white stripe during installation? This may be applying the radio's dimmer when you start your vehicle. You can learn about the dimmer settings on similar Pioneer receiver's here: th-cam.com/video/pMKUPcGE26c/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Don't know the exact model number. It could be MVH-S300bt, DEH-S400bt, or DEH-S4010bt. I bought it at Best Buy and they installed it so I don't know anything about the wiring.
@@edgreenberg7912 You can learn about the dimmer settings on similar Pioneer receiver's here: th-cam.com/video/pMKUPcGE26c/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Some good features on stereo, just trying to get the stations to remain on 1-6 on mine as each time radio is turned off these don't stay, not sure too sure why, any help is appreciated
If your clock and radio stations reset each time you start your vehicle, the in-dash receiver may have an improper connection for the Yellow Wire. The Yellow Wire must have constant power from the vehicle. This means if the vehicle is switched on or switched off, the yellow wire should measure at ~12 volts. The Red Wire is for accessory. You can view the red wire as the receiver’s on/off switch. The red wire should measure ~ 12 volts only when the vehicle is switched on. ---Do not connect the Red Wire and Yellow Wire together. --- Please take a look at this video for more information on wiring your Pioneer in-dash receiver: th-cam.com/video/kR2MO2kwFug/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Please be more specific with the model number. Is it DEH-S4250BT? or is it DEH-54250BT? Pioneer does not sell receivers in the US that work with Shortwave. In what country or region is the product being used?
Great video. I have the same audio system, but for some reason it does not find any radio stations... It play music from external devices, but not radio. Any idea how can I fix that?
What is the model number of your Pioneer in-dash receiver? Please be sure you have an antenna properly connected to the in-dash receiver. Pioneer receivers require an antenna connection from the vehicle in order to tune in any AM or FM radio stations. Without a properly connected antenna, the product will not receive any AM/FM radio stations. You can see the antenna connection on the back of the receiver in this unboxing video: th-cam.com/video/cXbvdfgLS2o/w-d-xo.html Also, I recommend to switch off the "Local" setting. You can see it here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find a full playlist of How To videos from Pioneer about audio receivers here: th-cam.com/video/Xa2xUgMOxRc/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Hi Friend, i imported a used car from Japan and it has a Carrozzeria Avci-vh9900, annoyingly the FM band ranges from 87 to 90, should i just dump it or there a remedy to this cause in my country thre band goes up to 107, thanx
Carrozzeria products are designed and manufactured to operate in Japan. I'm not aware of a way to change the FM frequency steps or range to operate in another country. I recommend to purchase a Pioneer in-dash receiver that is designed to operate in your region. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Can someone please help me, i bought a 2nd hand pioneer deh 380, when im installing it on my car it has all of my country fm stations and after im done installing it, i can only access 6 stations
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? Is it DEH-X380BT? In what country are you using this product? Do the FM radio stations where you are end in even numbers like, 88.0, 88.2, 88.4, etc...or in odd number like 88.1, 88.3, 88.5 etc... Do you have a proper AM/FM antenna connected to this in-dash receiver? If possible, please be sure to switch OFF LOCAL . You can see it here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics it ends in odd numbers, im using it in the Philippines, the model is DEH 380 it has no Bluetooth and i have a proper AM/FM antenna
You can find a full playlist of Pioneer How To videos about MVH-X580BS here: th-cam.com/video/U9R5Ax_-nVI/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? Please contact Pioneer in your region for support with Traffic Announcement. You can find them here: www.pioneer-car.eu/eur/support You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? I recommend to change the in-dash receiver's Local setting to off. You can see it in this Pioneer How To video here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html and try again. If this does not correct the issue, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on many modern Pioneer receivers behind the detachable face as shown in this Pioneer How To video: th-cam.com/video/o6iawP279R4/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What is the model number of your Pioneer in-dash receiver? When on the AM/FM radio source, I recommend to press the Band Button. You can see this demonstrated in the How to video from Pioneer here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html Please watch the video with the sound on. The video has detailed instructions for the operation of the AM/FM tuner built into your Pioneer in-dash receiver. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Is there an antenna connected to the in-dash receiver? The in-dash receiver will not tune in radio stations without an antenna installed. You can see the antenna connection in this video: th-cam.com/video/1AteS27fizI/w-d-xo.html Also, check the "Local" setting. Switch it to Off. Try to seek again. You can find the Local Seek Setting here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
You can find a full playlist of How To videos about Pioneer audio receivers here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/icdWHqbS-7o/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
Press the "Arrow Back" button also labeled as Band. This will change between FM1, FM2, FM3, and AM. All other operations are nearly identical to FM operation. You can see it here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find more videos about DEH-S4000BT here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
So far the three or four videos I have watched plus the official Pioneer operation manual does not explain how to adjust spearkers from front to back or side to side. thank you Bob
The Fader control is used to adjust the sound from front to back. The Balance control is one of the settings used to adjust the sound from right to left. Here is an Audio Settings video showing your how to operate both: th-cam.com/video/hiDOCp75UAI/w-d-xo.html You did not mention what Pioneer receiver you have so I can't point you to more videos specific to your receiver. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Thank you! It was taking me way to long to figure it out without a guide :X
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/icdWHqbS-7o/w-d-xo.html and you can find more videos from Pioneer here: th-cam.com/users/pioneerelectronics
Help! I can't change the radio station frequency using the track button. It always goes to the next pre-set. Any suggestions?
What is the model number of your Pioneer in-dash receiver?
This is an easy Seek setting change in the radio. Change the setting to MAN. You have it on PCH now. You can see this demonstrated in a How To video from Pioneer here: th-cam.com/video/b7Baainh0X4/w-d-xo.html Please watch the video with the sound on.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
was about return it back to the store until I saw this ... THANKS RoB.
You can find a full playlist of How To videos from Pioneer about audio receivers here: th-cam.com/video/42EL_JGXcJs/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Hi. What if my car doesn't come with an antenna. I have a 1999 Honda civic LX.
Pioneer in-dash receivers require an external AM/FM antenna in order for your to tune in any radio signal at all. Without an antenna, there is no radio reception. The 1999 Honda Civic had a retractable antenna, You may want to replace it. Here is one possibility: www.metraonline.com/part/44-HD98 Or you could go to an auto parts store and buy a generic auto antenna similar to this one: www.amazon.com/Herdio-Waterproof-Antenna-Flexible-SPA-Black/dp/B073W5V6BG/ref=sr_1_14?keywords=car%2Bantenna%2Bruger&qid=1637070596&qsid=139-4068062-9125830&sr=8-14&sres=B09GTZD2FL%2CB07VWS9V5S%2CB08R847MV4%2CB08DH7QS5Q%2CB076J1W2SV%2CB0002BEQN4%2CB07CNMDTY8%2CB08GL728J7%2CB08JPYWDMG%2CB073W5V6BG%2CB07R7RCRW9%2CB07PJX5611%2CB07TV22D4W%2CB0813968N2%2CB08R875SBX%2CB00009UHJS&srpt=ANTENNA&th=1
Install this antenna on the vehicle or hidden in the dash. If you install the antenna hidden in the dash you'll get some radio reception, but not great. The best place for the antenna is outside the vehicle in a vertical position. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Thanks I just ordered the universal hidden antenna from Ebay. I truly appreciate you guys for replying back to me. Hope y'all are enjoying your day.
The US FM radio spectrum uses 87.9-107.9 MHz range in 200 kHz steps (meaning that all of stations end in all-odd numbers only - 0.1, 0.3, 0.5, 0.7, 0.9 MHz), while here in the Philippines we're using 87.5-108.0 MHz worldwide-standard frequency spectrum, but mostly we're using 50 kHz spacing, e.g. 87.50-108.00 MHz, despite the Philippines also ends in odd numbers.
Please note, the product in the video above is the Pioneer DEH-S4000BT designed and manufactured for the North American market. I recommend that you use Pioneer products designed for your area. While many operations will be the same for the product shown in the video, and the products designed for your area, there will be small differences like the FM frequency steps you noted. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Does Pioneer have a model which can receive shortwave stations? I'm very much interested in buying a head unit which would include shortwave.
As of 2022 June, Pioneer does not offer a shortwave in-dash receiver in the North American region. I'm not aware of a Pioneer receiver that receives shortwave in other regions of the world.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Good clear video. Very helpful. However, I can't read the display during the day unless it's very overcast. I have no idea what station I'm on or what FM band. Can I make it brighter?
What is the model number of your Pioneer in-dash receiver?
You may have the in-dash receiver's dimmer on. This dims the lights for night time driving. Did you connect the receiver's Orange wire with white stripe during installation? This may be applying the radio's dimmer when you start your vehicle.
You can learn about the dimmer settings on similar Pioneer receiver's here: th-cam.com/video/pMKUPcGE26c/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics Don't know the exact model number. It could be MVH-S300bt, DEH-S400bt, or DEH-S4010bt.
I bought it at Best Buy and they installed it so I don't know anything about the wiring.
@@edgreenberg7912 You can learn about the dimmer settings on similar Pioneer receiver's here: th-cam.com/video/pMKUPcGE26c/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Some good features on stereo, just trying to get the stations to remain on 1-6 on mine as each time radio is turned off these don't stay, not sure too sure why, any help is appreciated
If your clock and radio stations reset each time you start your vehicle, the in-dash receiver may have an improper connection for the Yellow Wire. The Yellow Wire must have constant power from the vehicle. This means if the vehicle is switched on or switched off, the yellow wire should measure at ~12 volts. The Red Wire is for accessory. You can view the red wire as the receiver’s on/off switch. The red wire should measure ~ 12 volts only when the vehicle is switched on.
---Do not connect the Red Wire and Yellow Wire together. ---
Please take a look at this video for more information on wiring your Pioneer in-dash receiver: th-cam.com/video/kR2MO2kwFug/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I ordered a DEH 54250 BT because it has shortwave capability.
My issue is with the frequency step on the AM side. How can I reset the step?
Please be more specific with the model number.
Is it DEH-S4250BT? or is it DEH-54250BT?
Pioneer does not sell receivers in the US that work with Shortwave.
In what country or region is the product being used?
Great video.
I have the same audio system, but for some reason it does not find any radio stations... It play music from external devices, but not radio. Any idea how can I fix that?
What is the model number of your Pioneer in-dash receiver? Please be sure you have an antenna properly connected to the in-dash receiver. Pioneer receivers require an antenna connection from the vehicle in order to tune in any AM or FM radio stations. Without a properly connected antenna, the product will not receive any AM/FM radio stations. You can see the antenna connection on the back of the receiver in this unboxing video: th-cam.com/video/cXbvdfgLS2o/w-d-xo.html Also, I recommend to switch off the "Local" setting. You can see it here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find a full playlist of How To videos from Pioneer about audio receivers here: th-cam.com/video/Xa2xUgMOxRc/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Hi Friend, i imported a used car from Japan and it has a Carrozzeria Avci-vh9900, annoyingly the FM band ranges from 87 to 90, should i just dump it or there a remedy to this cause in my country thre band goes up to 107, thanx
Carrozzeria products are designed and manufactured to operate in Japan. I'm not aware of a way to change the FM frequency steps or range to operate in another country. I recommend to purchase a Pioneer in-dash receiver that is designed to operate in your region. You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Can someone please help me, i bought a 2nd hand pioneer deh 380, when im installing it on my car it has all of my country fm stations and after im done installing it, i can only access 6 stations
It doesn't have station 90 to 100 its loop on 83 to 89
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? Is it DEH-X380BT?
In what country are you using this product? Do the FM radio stations where you are end in even numbers like, 88.0, 88.2, 88.4, etc...or in odd number like 88.1, 88.3, 88.5 etc...
Do you have a proper AM/FM antenna connected to this in-dash receiver?
If possible, please be sure to switch OFF LOCAL . You can see it here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html
You can find more videos on Pioneer's TH-cam Channel here: www.youtube.com/@pioneerelectronics
@@pioneerelectronics it ends in odd numbers, im using it in the Philippines, the model is DEH 380 it has no Bluetooth and i have a proper AM/FM antenna
@@johnpatrick426 Please contact Pioneer in the Philippines for support with this product. sg.pioneercarentertainment.com/faq
Pioneer Music System Is Most Favorite and Best Music System In Pakistan In Pakistan.
You can find more videos on Pioneer' TH-cam Channel here: th-cam.com/users/pioneerelectronics
Very helpful it worked for my
mvh-x580bs
You can find a full playlist of Pioneer How To videos about MVH-X580BS here: th-cam.com/video/U9R5Ax_-nVI/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
What about traffic announcement tutorial
What is the model number of your Pioneer in-dash receiver?
Please contact Pioneer in your region for support with Traffic Announcement. You can find them here: www.pioneer-car.eu/eur/support
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
I'm only getting one channel on the radio does any one have any ideas what I can try I have fitted a new ariel but still only getting the one channel
What is the model number of your Pioneer in-dash receiver? I recommend to change the in-dash receiver's Local setting to off. You can see it in this Pioneer How To video here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html and try again. If this does not correct the issue, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on many modern Pioneer receivers behind the detachable face as shown in this Pioneer How To video: th-cam.com/video/o6iawP279R4/w-d-xo.html You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
@@pioneerelectronics thanks alot all sorted just turned local off
So how do I get to AM?
What is the model number of your Pioneer in-dash receiver? When on the AM/FM radio source, I recommend to press the Band Button. You can see this demonstrated in the How to video from Pioneer here: th-cam.com/video/nHsTTLnDdOo/w-d-xo.html Please watch the video with the sound on. The video has detailed instructions for the operation of the AM/FM tuner built into your Pioneer in-dash receiver.
You can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Good job 👍🏻
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
When I tried to seek to the next available radio station it just kept seeking over and over nonstop??
Is there an antenna connected to the in-dash receiver? The in-dash receiver will not tune in radio stations without an antenna installed. You can see the antenna connection in this video: th-cam.com/video/1AteS27fizI/w-d-xo.html Also, check the "Local" setting. Switch it to Off. Try to seek again. You can find the Local Seek Setting here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
@@deckerdotto6035 oh wow thank you so much!! it worked!
Thanku
You can find a full playlist of How To videos about Pioneer audio receivers here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's TH-cam Channel here: th-cam.com/users/pioneerelectronics
Really Helpful
Nice video 👍
You can find more videos about Pioneer DEH-S4000BT here: th-cam.com/video/icdWHqbS-7o/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
How bout the AM radio?
Press the "Arrow Back" button also labeled as Band. This will change between FM1, FM2, FM3, and AM. All other operations are nearly identical to FM operation. You can see it here: th-cam.com/video/b7Baainh0X4/w-d-xo.html You can find more videos about DEH-S4000BT here: th-cam.com/video/Z6g0EOPZL0c/w-d-xo.html and you can find more videos on Pioneer's You Tube Channel here: th-cam.com/users/pioneerelectronics
HOW TO TUNE FM RADIO || एफएम रेडियो ट्यून करने का सबसे आसान तरीका || 90.4 FM SIKAR….th-cam.com/video/zbAPVGzcs_I/w-d-xo.html
FM SIKAR
Idioma Español
Please be more specific with your question. What is the model number of your Pioneer in-dash receiver?