What Did I Buy NOW??

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 20

  • @bertgrau3934
    @bertgrau3934 2 หลายเดือนก่อน

    Now that brings back some memories. I drove one of those, it had a 237 horsepower Mack. That engine wasn't supposed to come out until 67, but I don't know how the truck I drove got the newer engine. Maybe someone replaced the original. It had the Quadraplex. 5 X 4. One rough riding truck, but very dependable. I was easy on it because i was told the transmission couldn't take all the torque of the engine.

  • @davidbowser2395
    @davidbowser2395 หลายเดือนก่อน

    10.00 x 20 is the same as 22.5 for just converted to radials compared from being nylon/ bias ply. But you run tubeless rims but can still run radials on those rims with tubes too.

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน +1

    New rear end, a new comings Indian put new seats in there. Put a nice nap around here but a headache. Crack in the back. Cut that old. What's it called it off? I didn't put a doom on there😊😊

  • @matthewridgeway9250
    @matthewridgeway9250 หลายเดือนก่อน

    Paint it Soul Red Mica.
    It is a Mazda color and it looks fantastic!

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน +1

    Get news daily in there because you're gonna have to get new staring. You gotta get new steering and stuff if it's hard to steer, you'll have to get the news to turn them box everything it's look for another Mac. I knew a Mac and put the taking painting guts out of the air and put all new stuff up in there. It's worth it, you gotta do a cheap. Just go and replace all the new stuff in there. Because if it's hard you said it's harder to drive like that now. Replay song of the stuff little by little

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน

    News set up new brakes, new everything. You can drive a truck like that new brakes.

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน

    Get-go get it outside Dun chains to get the breaks done, rangston Van. You can do the inside of the truck last but you need to get them breaks on your need to get them priced into peace and metal plate play. You need the gift change, make it your other rear end. Get that we're in get you some breaks. See some decent airbreaks on it. You need airbreaks get some air breaks on yourself from handsome

  • @matthewridgeway9250
    @matthewridgeway9250 หลายเดือนก่อน

    Mack never made a wagon.
    Make it the first passenger vehicle. Follow the stule of the sides all the way to the back!

  • @bwilliams463
    @bwilliams463 4 หลายเดือนก่อน

    Looks like a long wheelbase for a single. Did it come from the factory that way, or was it possibly shortened from a twin screw?

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน

    Yes

  • @ericmhinkle6003
    @ericmhinkle6003 3 หลายเดือนก่อน

    Yes I would completely restore this truck ,from the ground up because it is an historic vechicle

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน +1

    You can put a new engine

  • @JeronWhite
    @JeronWhite 4 หลายเดือนก่อน +1

    2 tons get that get you some numb new lines and stuff. Put a radio in there set alarm for 5 set puppy oil cleaned up you can. You can take those dictators when sticks out you change engine and stuff put a brand new comes in there. May go to if you wanna go to eat and Fuller, go to eating food or change all that change all that stuff out, change all this FI get on, you get new seats. Forget reply, just get on new seats go find another truck report another Mat. Can you see Saturday for UP to run that clean up puppy out for furnace it get your new plate put on the back of that. Could you get your new plate if you're gonna sit in head off or get you from Steff, you need a grease that faith will get a freeze will grease get a new faith will and get some lights in the back of that LA d's LED s for the front in front. Don't burn everything else, let's say, i'd take that truck. I'd have them, we do that whole truck, are you stupid from the end and out? Get them twins stakes, we go on a we go into one staff we're going to I gotta go to a 15 speed or an 18 speed pin speed. I need ninety, some power and Stefan there. That's a good truck. Good project truck should be set for part out of your taken hood off. Do not soccer blasted, put new equipment drop nailing United air. Taking all the stuff out cleaning it up