Suzuki GS550 Mini Buggy Build Part 4! || Suspension and engine!
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- It just gets better and better! Time for a full rolling chassis!
🚨WILDFOX FABRICATION MERCH🚨
wildfoxfabrication.com
Rule sheet:
docs.google.co....
Lincoln's channel (go subscribe!):
/ flamingrayz
Consider supporting me on Patreon:
/ downtoascience
Part 1: • Honda XL500s Mini Bugg...
Part 2: • Honda XL500s Mini Bugg...
Part 3: • X̶L̶5̶0̶0̶s̶ Suzuki GS...
Links to all the parts I used:
44" axle:
www.gopowerspo....
Wheel hubs:
www.gopowerspo....
The little hub thing I welded the sprocket hub onto that goes onto a 1" shaft:
www.gopowerspo....
Pillow block bearings:
www.amazon.com....
Rack & pinion steering kit:
www.gopowerspo....
Filmed on the Panasonic Lumix FZ1000 with the Feiyutech AK2000s gimbal and the Takstar SGC-598 mic and edited in Apple Final Cut Pro
.ps um sobscrib pls
Dude this thing is awesome, it looks just like mine😁👍
Honestly glad you switched motors even if you had like a 450 motor it would be underpowered. Good decision
Haha yeah. my original motor (the 500) made like 30hp it would have been depressing
I noticed that downward slope on the front bars when you 1st put it in but I did never say anything because whenever a young man is learning something it's best for him to figure it out and not a bunch of people queueing his work
Haha. I noticed it right away i was just dreading having to cut it off and fix it but my ocd eventually got the better of me
You should add a semi independent rear suspension
In the future I may attempt to redesign this with semi independent suspension. I just have to figure out how to make it so the shocks can pivot side to side as well as up and down
the work is quite good and thorough, I'm from Indonesia
Good job man, it’s looking sick!
Very cool! I am very jealous that your parents let you take up that much room in the garage lol! Can't wait to see this beast on the road!
They dont have a use for the garage anyway lol they just tell me I have to keep my car parked inside the garage cause they aint want it on the driveway 😂
Kijana wonderful wonderful job I am now heading to part6
shopping cart ex was a really good example.
"But for now, I gottaendthisvideoherethankyouallfor watching........ and I'll see ya; in the next video." -Chris/Tyler
I started saying that without thinking and then halfway through realized oh wait I can’t do that and switched it up a little haha
@@WildfoxFabrication 😂😂 that’s awesome
Sweet been waiting for this for a little while
Right it does look like yours Chris, awesome keep it up 🤙🏽👍🏽👌
Yes! Been waiting on this!!!
Saludos de Peru......!
Im thinking of building a Mini buggy lil that myself
sick build bro! similar to mine with the sandrail type chassis but you got the monster engine good shit!
Finally another video hahaha.
im doing my best to upload as much as possible 😂
@@WildfoxFabrication Don't worry about man. Completely understandable. Quality over quantity.
👍🌷🌷🌷👍👍👍🏍عالی بود
مرسی بخاطر ویدیو که گذاشتی و لذت بردیم👍👍👍👍🏍
Well done
With your engine mounted on the swing arm, how did you set up your shifter linkage so it's always in one place for your hand?
I just put the pivot point as close to the pivot point of my swingarm to mitigate shifter movement as much as possible, it still moved a little bit under full compression but for the most part it worked great
13:27 child labor, you love to see it
🚀🔥
Love the design But it won't be a bit heavy at the back and the suspension doesn't help
Yeah I am tuning the rear suspension to be a lot stronger because it ended up being way too soft
ansioso por verlo terminado
Holy shit that's bills bone yard
How much did you pay for motor becuse at my contury its listed for 10 000 dollars in non driving condition
Good innovation,which dimensions did you use ?
a lot of centimeters by a lot of centimeters
hi bro where did you get your wheel hub knuckles?
Off of a broken 4 wheeler I found for cheap
Make it more higher
O amortecedor traseiro ficou muito próximo do eixo de movimento. Foi por esse motivo que ficou muito mole o balanço.
A razão de eu ter feito isso é para permitir um movimento mais geral da suspensão; se eu colocar molas mais rígidas mais perto do pivô, isso permite que a suspensão se mova mais longe. Você está certo, eu poderia ter consertado movendo os amortecedores mais para fora, mas eu reduziria significativamente o curso da minha suspensão com isso. Acabei adicionando um segundo par de choques para endurecê-lo e agora funciona muito bem
Why did i comment on last video should've watched this before commenting
Muy bien hecho
Where do you get the front shocks from
Sketchy dingy scrapyard
Hey where was the boneyard i need some parts and what was their prices were they reasonable? i might get a few engines from them
It’s in West Valley City, Utah and it’s literally just called “boneyard” on Google maps, prices are definitely reasonable and he’s willing to negotiate, outside engines are $40 apiece cause most of them are pretty damaged, he’s got tons of engines inside in better shape too that are presumably more expensive but I’m sure the prices are still super reasonable with those, the shocks cost me $30 for both
@@WildfoxFabrication dang well i might head down there, did you see any two strokes
@@ldpackman5594 oh yeah tons and tons of two strokes, snowmobile engines, dirt bike engines, everything
@@WildfoxFabrication Heck yeah. I’ll have to go check it out
There off a 87 honda shadow 700
haha yeah I found that out shortly after recording that section, that would explain the H-SH on there haha but thank you
Man where is the correct location of that garage
an Iranian military bunker
Iam from india iam making a mini buggy at 150 single cylinder engine
جميل جدا
I'm sorry i dont speak noodles 😂
@@WildfoxFabrication noodles lol
I built a buggy but not so flexibility
Time video did not show the real proses of working
what
Veary longer video
Part 5m
Trying to get it out asap
🇧🇷
18th comment, get rekt everybody. Epic video
6th comment
Congradujilimaninations
@@WildfoxFabrication thamk yu
@@WildfoxFabrication hahahahahaa
Kebanyakan ngoceh