Old Yanmar YMG1800 tractor fully restoration | Fully restore and repair yanmar plows
ฝัง
- เผยแพร่เมื่อ 23 มิ.ย. 2022
- On a beautiful day we went to find and buy old things for restoration, by chance we entered the house of a resident and saw a yanmar YMG1800 tractor, also known as a plow. they have left in the garden for about 5 years not working, the trees have grown around the tractor and the tractor has rusted a lot, many places are still rotten. we bought this tractor for $400 to restore and repair this tractor. we took it home and disassembled all the parts for restoration, first we restored the rear wheel drive of the machine, in part 2 I restored and repaired the yanmar YMG1800 tractor transmission, next i restore the engine of the tractor, although the outside is very rusty, inside the gears and bearings are very new and in very good working condition so we just cleaned and cleaned the internal parts and assembled them. back them. Within 30 days we restored and repaired the tractor and it was back in operation and better than before.
I hope you find something useful from this video!
I am very happy to receive your feedback, advice and suggestions to improve myself more and more
!!! I apologize for the mistake if I did in this restore!!! Thank you for watching the video have a good day. Don't forget to like and subscribe to the channel
Link subscriber
/ restorationittool
Link facebook
profile.php?...
Link twitter
/ mrthao18
#restoration #restore #tractor #plow - วิทยาศาสตร์และเทคโนโลยี
Greatest idea I've seen yet....start at the rear and restore everything in line to the front.
đẹp tuyệt vời chúc mừng
😂❤😂😂❤❤😂😂❤🎉😮😮😮😮😮😮 আপনি অনেক ভালো কাজ করতে পারেন
TV
بصحتكم والله عجبتني بزاف بزاف بزاف ربي يحفظكم و شكرا
Kerja yang sangat bagus 👍👍👍
Lol!
Yeah right! 😄😆😃
I am always thrilled where you always find your old and broken machines and vehicles. Everywhere stand and lie these things with you in the forest, gardens or other areas inside. I can somehow NOT believe it!
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
😮 2:03
Tuyệt vời em ơi. Còn trẻ mà giỏi nghề quá. Em vừa làm nghề vừa làm youtube là rất hay. Em nên đầu tư thêm máy móc, ví dụ như máy bắn cát, hoặc kỹ thuật phủ những lớp sơn bóng nhẫy để làm ra những sản phẩm đẹp hơn nhanh hơn thì thu hút được nhiều người xem hơn. Bây giờ sửa chữa những gì nhỏ nhỏ là người ta không thích xem bằng những chiếc máy cày, ô tô lớn hơn. Kỹ thuật làm phim cũng rất tuyệt vời, xem cũng sướng mắt. Chúc em thành công hơn nữa.
Just imagine if they had access to new parts and the equipment to do the rebuild by the book.
Not taking anything away from their ability to do a teardown and rehuild with whats available to them. Nice work
Dismantelling is easy, but in refitting remembering all parts are difficult.
You , Sir, are a world class technician. But every time you remove a nut or bolt, I fear you’ll break it. Very well done.
🎍🎏🎍🎇🏅🏈🏉🕹️🎿🥌🏓
🥈🏉⚽🥍🏓🏐🏀🥏
🏒🏐🏒🏅🏐🥎🏐🏆⚽🏀🏉🏅🏈🏀🏓🏓🏀
7 uttar hoon
1
Nos aqui no brasil já somos fã de todos os asiáticos, pela competência e educação. Parabéns pelo VIDEO maravilhoso.
You work with such confidence I have a yanmar 1700 water in the head started for a few minuets then turns but will not fire Im afraid to open a can of worms Wish you were here CHEERS
Waw good restoration project 🌟❤
Nie ma jak panewki skrecac udarem.
🤔
Thanks for sharing for this full restorerations of Yamaha machine kubota tractor
Not taking anything away from the effort but me thinks these guys have a lot of experience with these types of projects. Because there are a lot of pieces to clean up and put back together without getting any mixed up in the process. Just saying.
This guy is a one-man wrecking crew!! Only better, because he knows how to properly reassemble it.
Now they only have to finish restoring it with the correct parts and decals!
Excellent job on restoration. I really like the paint on the tractor. It sounds great. You did a fantastic job restoring it. I can't wait until your next project. Thank you for sharing.
Güzel bir çalışma olmuş
Very good & completed fully restoration the tractor 🚜 👏 job thanku
@@haticecakmak7837 kjfjdpeszzlmxdmdlz
نج حجم
@@haticecakmak7837 ³mjj8
Que trabalho e paciência belo trabalho amigo fico lindo e trato novinho
mn
@@RakeshKumar-so4zx Q
_
0 UK😊pIn😮
Quedó bien , limpieza ,pintura y cambio de aros ,me imagino que le habrán echo, el escape quedó muy feo y los guardabarros también y no son seguros , los originales se podían reparar ,con paciencia todo se logra , saludos !!!
I'm still waiting for them to finish restoring it!!!
Felicitări, cu sinceritate!
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor
with 20000 hours on drivetrain.
@@jiefflerenard1228 You're right. But I think that was the goal, they had no money, no budget for anything else.
Love from Pakistan 🇵🇰 Bro nice work ❣️❣️❣️❣️❣️
thank you
@@restoration-restore-repair l
You do not just repair, you completely disassemble, clean and rebuild. you have amazing skill and attention to detail. It is very admirable and I am in awe.
thank you
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a repainted 40year old tractor
with 20000 hours on drivetrain.
👌🤗. Obdivujem pamäť, talent a pracovitosť.
Pozdravujem z EU. SLOVAKIA 🇸🇰
My brain is fried watching this lol. Great job though!!
SALUT PRIETENE TE URMĂRIM CU DRAG.SĂNĂTATE ȘI SPOR LA TREABA.DRĂGUȚ VLOG.PA.PA. NUMAI BINE PA.PA.PA.
I love these old Yanmar tractors! Nice to see people saving history!
Keep up the good work!
P
@@jageshwarisonwani7465 ÀÀ
@@anantagopal9670 ❤ংদধকশ
দদ্রুঘ্ন
@@jageshwarisonwani7465we OK i😊🛃↖️ 1:31
🇷🇺
คุณความจําดีมากครับพี่
How in the Sam hill can you remember where every part goes?
Этот парень достоин уважения как все сделал красиво!!
thank you very muck
Da.
Except for the ugly homemade fenders, etc, etc!
Looks beautiful. I'd love to see it running now.
With a good pair of glasses you 'd see it running at the end of the video.😀
@@Boubson😊
Did you rebuild the engine
This is so satisfying 🤩🤩🤩🤩🤩🤩🤩🤩
Super 🌹♥️👌👌👌
Genius work 💯💯💯🌹🌹🌹🌹👌👌👌🙏🙏
thank you
大修之前先清洗是正確的做法。
when assembling the tansmiy, I did not see that the bearings were lubricated, completely empty
BRAVO.
🕊️🌹🇦🇱🇮🇹.
in,ALBANESI.
ITALY Abitare.
Un ragazzo sveglio,bravo e preparato. Video stupendi.
Good project and good results.
👍👍👍✨️🇺🇸🇺🇸🇺🇸
I can't believe how many people on here don't know what a restoration is!!!
It did not come from the factory like THAT!!!
@@TF856 👍👍👍
Unbelievable lads well done! Newer saw a disassembled tractor to almost an every single bit and put together after!
Ok ok😊
What a great find. Loved the rebuild. Thank you for sharing.
thank you
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
Ol
Pjps
@@restoration-restore-repair %iq
My best friend, Great... Awesome... Full watched. Thanks Have a happy day!
Phai noi la anh gioi that thu gi anh cung hoi sinh duoc , chuc a co that nhieu suc khoe
hi.làm nhiều sẽ thành quen mà
Bravo, cool job and beautiful videos 🎉
yes. like video
Good restoration!!!
What restoration?
If they're doing a restoration then they are nowhere near finished!
It did not come from the factory like that!
Lanjutkan kawan 🇲🇨
Good work
great work guys!! vert good video.
Great job bro
thank you
Parabéns pelo longo e dedicado trabalho de recuperação para dar uma nova vida a um velho Tratorzinho Yanmar japonês, o qual estava abandonado e apodrecendo mas, a partir de agora, poderá ainda prestar muitos serviços. Saúde, paz, alegrias e muito mais sucesso!
ippp
Pp0p
С этого момента этот трактор считай мёртв, ни одной детали не заменил, всё собрал на грязной деревяшке ещё бы в песочницу залез, динамометрический ключ... Не, не слышал. Поменять прокладки, кольца ,манжеты, подшипники... На. ху. я... Разберём, закинем песочка, т красивенько покрасим. Рукожоп.
@@mishelmishel2387 😂❤🎉
But next time make sure you do change the engine oil filter ...
You’ve done a excellent job restoring the tractor very impressed with your skills
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with 20000 hours on motor.
I agree. Roller bearings could be good, can be reused. But when the brake drums and shoes were put back together half dirty I was like... And then, putting back the crank into main bearing where it worn out down to the copper, that was it for me.
@@billbrox8666 hb
@@rajeshpingoliya4153 idnu
@@billbrox8666 f thisfffhuy
Thank you amazing brother.
Work manshap is not clean. Keep rocking🎸🎶🎶
Learn is the best skill and I am would have it
thank you
Is it really necessary to strip every part down?
4ك0
تقنيه فايقه شكرت
Well done a lot of time and work but looks and runs well jimmy Aust
Wow so beautiful fracture
😮8b
it s beautiful, but exhaust is meybe to long?
This is so funy to watch..... Build the motor without tork wrench... 😂
it`s a tractor, not a F1 car...
@@hera9539 good luck with flywheel and crankshaft without tork wrench
@@markomarkovic6470 no luck needed! my Yanmar FX255 is still running after a engine rebuild 5 years ago...
@@hera9539 maybe for this model ,but i would newer recommend to do without proper tool on other tractors
@@markomarkovic6470 I wouldn't recommend that either, of course, but they're not high-performance engines either. Small 2-stroke engines under 100cc are often bolted together by feel without torque and have to withstand much higher rpm....
Otimo trabalho parabéns
៨
Extraordinary great restauration job !!! Congratulations guys !! In Europe, except some people who like this kind of work (restauring old machines), there is less and less chance to manage to rebuild like you did, not just because of lack of interest, but because of our environmental drastic rules ! Go on guys !!! MARVELLOUS JOB !
Thank you for being with us
Super fachowcy, robota wykonana super,
Tak!😃 Pozdrawiam z Polski!
They can't be done yet!
They have only done a repair!
They're supposed to do a full restoration!!!
They still need factory parts, decals, etc!
@@TF856 Sub!
Trator ganhou vida Nova trabalho bem feito nota 10 🥰🥰🥰🥰🥰🥰🥰🥰
thank you
А ГДЕ НАСТАЯЩИЙ ХАЗЯИН ..??
В АВРАГЕ ЗА СЕЛОМ )))
8iug
Vry nice restoration 😃
They can't be done yet. That is not a restoration!!!
What do you use to wash tje engine parts ?
My friend, what is it with the rear hydraulic lift?
Как все запомнить при сборке? Молодец.Все красиво сделал.
McKay
@@bholakashyap8295 aaaaa
Except for the missing parts and decals, etc.!
This is not a restoration!!! This is a repair!!!
Ôi trời ơi đi kiểu gì đấy
Using the last one to pull the new tractor
Good.job
Genius Restoration !
Obviously you have no idea what a full restoration is!!!
That right angle bend in the end of the tail pipe exhaust will reduce power. Go with 2 45degree bends and feel the difference. For hard work sometimes that right angle exhaust bend can overheat the exhaust valves and warp them.
Ppv
⁰
hilobnskskssjsmska
Wow... !!! My best friend, It's always great. Your video is excellent quality. We liked and enjoyed to the end. Thanks
Зачем разбирать если опять всё старьё поставил назад. Ничего нового не поставил.
даже смазку в подшипники не положил :-(
и прокладка гбц старая
Chiếc xe vẫn còn mới nguyên, chẳng qua họ đưa ra để quay video clip thôi, không phải thay thế cái gì
très bon travail bravo
TrTAnstILate
They can't be done yet!
That is not a restoration!!!
Подшипники в гнездах прослаблены,похер,медной проволокой через акуамулятор наплавь
Труба длинная,обломит быстро.
great. I love tractor
ეს უფრო კაწ
Good video
Good job 👍
👍👍👍👍👍
good my friend,👍👍
thank you
.
@@restoration-restore-repair I like your videos👍
@@restoration-restore-repair llllllll
@@Sukabertaniofficial lp
Sou do Brasil ...muito obrigado por esse vídeo excelente trabalho !
You are very talented, another great job! Great looking little tractor.
Craigslist re-build ,paint is cheaper than parts
Nice
I am so impressed fair play to you sir 👏
जबरदस्त आपकी टेक्निक है, मान गए गुरु
I really enjoy these videos. I do wonder if everything is torqued correctly.
d(
Nice one brad
good restore👍👍😘
thank you very muck
They cleaned everything ,did not change a single part or bearing, what the point???
East Asia cheap labor ,no spare part ,some guy is going to buy a painted 40year old tractor
with20000 hours motor.
That is not a restoration!!!
It was only a repair and poor paint job! They still need more original parts to make it a restoration!!!
@@restoration-restore-repair k baad me q o na
@@restoration-restore-repair tool cf
Awesome❤😂😂😂😂❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉
😲 wow nise
great video
T to yiyyiii TT yg
Yy
Top of the day befoed fgda
😂😂😂😂😂😂😂
@@ahmadkanjo537621
How long will it take you to complete this machine?
NICE JOB ,but the clawhammer.......
Include the wire harness repair.
Hello. It's a great project that you have implemented. Congratulation!! The towing vehicle looked like a Shibaura. I have 2 of them. The SU1341 and the SU 1301. Unfortunately, I am missing repair manuals, spare parts lists and operating instructions. I would be very happy about help. Best regards. Carsten from Germany