Fix a dent quick cheap and easy! TESTING THE CHEAPEST DENT PULLER ON AMAZON!!
ฝัง
- เผยแพร่เมื่อ 31 ม.ค. 2019
- Fix a dent quick cheap and easy! TESTING THE CHEAPEST DENT PULLER ON AMAZON!! Watch as the dent slowly comes out! You'll be impressed!! Dent Puller Links: amzn.to/2S5dVrv or amzn.to/2WjkztQ Dead Blow Hammer: amzn.to/2CHu9h5
Facebook: / stoneyridgefarmer
Instagram: / stoneyridgefarmer
Support the farm! Pick up a nice Hat or Shirt in our online farm store: stoneyridgefarmer.com//
Looking for something we used in a vlog? Click here to our Amazon store!
www.amazon.com/shop/stoneyrid... (affiliate link)
WEBSITE FOR PRODUCTS WE TRUST ON OUR FARM:
Meyer Hatchery: meyerhatchery.com/?aid=178
Electric Fence From Premier:
www.premier1supplies.com/?utm...
EVERYTHING ATTACHMENTS: www.everythingattachments.com/
LOOKING FOR SOMETHING WE USED A VLOG????
SUBSCRIBE HERE:
th-cam.com/users/stoneyridgefar...
LINKS FOR PRODUCTS IN THIS VIDEO:
(SOMETHING MISSING? LEAVE A COMMENT!!)
Best Watch I've ever owned: amzn.to/2H8mY1Z
Oakley Gas Can Sunglasses: amzn.to/2FO1Dhp
DJI Mavic PRO Drone: amzn.to/2yU7nzd
Sony 4k Handycam: amzn.to/2nnctP1
Go PRo Hero 4 (4k video): amzn.to/2ut8IPQ
STONEY RIDGE FARMER'S FAVORITE BOOKS:
How to win friends and influence people: amzn.to/2FoFtCV
THE WOODLAND HOMESTEAD: (Wranglerstar) amzn.to/2IoVoCC
PASTURED POULTRY FOR PROFITS: amzn.to/2rS6mGv
SALAD BAR BEEF: amzn.to/2IpQIwj
FOLKS THIS AINT NORMAL (JOEL SALATIN) amzn.to/2IxAnBy
MINI FARMING (SELF SUFFICIENCY ON 1/4 ACRE): amzn.to/2L6GT3Y
RICH DAD--POOR DAD: WHAT THE RICH TEACH THEIR KIDS ABOUT MONEY: amzn.to/2Gt0yb1
I would of just popped out the door panel the slam the palm of my hand and pop the dent right out I did that on my Mustang no problem
Was gonna say the same.
Not a bad job vaddy
It's really quite obvious. Could have left the stuck on trim too. Yahoo's
you spent more time doing it than right omg!!
you are not teaching anything to anyone !!
My EX could suck that out with her Fake Lips. She looked like a Grouper
OMG you have given me the confidence to use my dent puller. I will invest in the mini one I never knew you could get them that small. Finally I can use my own plastic mallet for the first time! Which is a great idea I would never of though of this. Especially in these economical times great video!!
Pour a couple of kettles of hot water on get panel very hot (metal expands) suction cup pull and put cold water on (metal contracts) dint should be history . I was doubtful when some one advised me to do it but it works a treat wooo
John Fisher Makes perfect sense.
If you do that on a cold day it can ruin the clear coat on the surface.
DENT, not DINT.
Excellent advice! I need to do this.
@@mjremy2605 dent / dint same meaning both correct grammer good luck with it
@@johnfisher516 Yes, you are right! Its old English. I never knew. I learned something! Thank you. I usually check before I correct anyone, and this time I didn't, and it came back to bite me! Ha ha!
I am a grandmother who bought one of those orange pullers yesterday to try my hand at getting a large pushed in area out of my truck back bed panel. Had watched a few videos like this first, and was able to pull 50% out with the first pull. (I am not at all strong) Worked another 20 minutes and got most of the rest of it except an area that has a crease in it as in this case. The truck is a beater, so I am not going to worry about it, but I am happy with what it did and I certainly got my $4 worth.
But you are a strong lady get it Granny Granny
I am a grandma too, and I am not sure if I should buy it, the dent is worse than this. The problem, when I go to get gasoline, men stop by and say, “ for $350 I fix your car right now. Sorry I don’t have cash. Don’t worry, for $250 I fix it now. Thank you but I don’t have cash now. The last man told me, for $100 I fix it, you can get the money from the amt machine, ….🤔🤔🤔 I said, give me your phone number and I can call you next time. 🤔🤔🤔😂😂😂😂😂 I know $100 is not much but I wasn’t being sure
I'll admit that was more funny than informational but I'm good with that!! Thanks!!
Did pretty good. Got a new sideline now. I would have removed that term first but you got there. But I have been around it for along time my brother had a body shop until about 3yrs ago when he to decided to retire around 73 or 74. God bless you'll
Your video's are so informational and fun to watch. Keep up the great work.
Wow, they do work! I have to do my car too!
A heat gun would have worked well. And alternate between heating and dry ice behind some foil. The hot and cold works well to pop out small dents. I would have take out the door panel and pushed that out with my hand or a rubber mallet. They also have rawhide mallets for jewelry that are gentle. Thanks for a great demo!
12:22 thank me later
Appreciate 🙌
Later: Thank You
Ty
Pro_player441 thanks
You a goat
I'm honestly trying to fix my door and found this and all I gotta say is, what in tarnation is going on ? I went from watching one gentleman having a four step well executed plan to two southern gents making animal noises and extreme grunting when making each pull.🤣🤣🤣
Each shop keeps telling me I need to buy a new door because it "rolled" against some brick and bent the door up to the handle making me nervous I'm going to rip my handle off. I realize, doing this by myself will not get it perfect again, but hear me out. It will cost 3k to replace my door, paint match, and labor costs. I feel like I can try to fix it thanks to these videos, and yes, know it won't be perfect but again, I'm tired of looking at that dent. I hurts my soul with a $445 monthly payment and 2 yrs of memories. So, thanks everyone in these videos for all the laughs while I try to figure this out.
So any updates?
I have several dents on my out of shape body...this will work good! 🤠
I used a toilet plunger to pull a dent on my '64 El Camino years ago. Worked fine, lol.
Probably depends on the size of the dent. I'm sure this helps more with the smaller dents
First time watching your videos and man that intro has me hooked “no beavers were harmed in the making of this video” the sound just put the whole thing together. Plus it helps that I’m a sucker for dad jokes. -^.^-
Good humor friend.
I value seeing people enjoying themselves while accomplishing something. By chance, have you both known each other since you were kids? Thanks for the video.
This is the most wholesome commment I have seen in a while. Thank you.
@@gayealisir5661 dude you're gaye
Try using a hair dryer set on Hot on the dent, when you're pulling. It really helps.
Is a heat gun better than that a suction cup ?
@@miketin745 you want to use both. Heat it up and suction pull it out
We purchased that same suction pad from Harbor Freight in the Bronx NY to address a pointless dent at rear driverside panel right near the bumper cover. It did a good job on the area furthess from the bumper cover, but we have the same issue with a crease that we now believe that a smaller suction pad will work. Thanks for your suggestion on releasing the pressure on the creases as well.
That's where I bought mine.On Boston Rd.
You know back in the day we went to the hardware store and got a bunch of toilet plungers and used them! They still work!
Sometimes
Why do you need a bunch?
Looks another better. Thanks for sharing.
The quickest way would have been pulling the door panel and hitting it from the inside. The cold metal sure didn't help in removing the creases. Nice job having a lot of fun with a friend.
I would rather try this before pulling everything out from the inside. I’m not sure I would get it back together properly and I’m not looking for more problems
Some good ol' clean fun. Right on guys
That was awesome! Thank you!!
314,000 miles. respect
Awesome job! I hope it works as well for me!!!
Great job guys!
Thanks for testing this! I was in the parking lot of the grocery store and damn if the wind didn't push a shopping cart into the door of my van and dent the hell out of it. But I think I can get it out with this with a little perseverance and a measly $5.
I also used one of these kits: amzn.to/34yiZKM (affiliate link from Stoney Ridge Farmer) it's a Paintless dent and ding remover kit...it will take out small dents very nicely in case the big dent puller doesn't work
@@StoneyRidgeFarmer what do you think about the heat gun ?
@@miketin745 It is a good idea but watch out for paint peeling if it gets too hot. Gently. Wagner $22 at Home Depot. I did my plastic bumper this way with no issues. Popped right out.
@@StoneyRidgeFarmer $97 on Amazon with $10 tax in CA. Not worth it.
LOL! I was waiting for the lick! Hilarious! 😁😉
If you're gonna go from the outside, I like that you took the trim off. Good effort guys !
Good job y’all!
Looks pretty good, great job.
So damn funny. You two are having way too much fun.
Yall are great. Thanks for the video
The most fun I never wanted to have!! LOL!
Thank you for sharing
Always something to take from ur videos
well done! simultaneously pulling and hammering is the key
Yeooo gawdd cha Ching!! Lol after the massage..
grateful for you guys for making such a useful.video
This guy is great I can't believe I just found it now but I love your videos awesome work I learned so much from you from this short video appreciate you
Love the videos! Great work x
You fellas gave me some Real Hope and i may get my door dent out with your help and a prayer!
U got it?
Thank you bud
Funny video guys 🏴🥃
good video, looks like yall were havn fun to me and that to me is what makes a good video👍👍👍👍👍👍
Awesome absolutely loved it 👍🏻
Your entertainment working very nice, good job
Damn, for the money you can't beat those suction cups. Gunna go out and buy me a couple as well today.
How did it turn off ?
@@miketin745 It actually worked, but for some dents the crown of the dent is in far too advanced or technical of a spot for the suction cups to work.
Did you use a heat gun ?
@@miketin745 no
I really appreciate it I was trying to figure out should I buy a heat gun or suction cups
Harbor Freight and my inability to budget will lead to my financial demise. The tools are cheap, but love the place. Thanks for the fun video!!
This vlog is great!
Good job you guys that was fun to watch . Cheers
I fixed my Subaru bumper with Hot water and pressure works a treat .Your dint is to close to a main beam it may work a little but it will not repair %100 .
This was an exciting video to watch I just bought one of those dent ding removers🔥🔥🔥🔥🔥🔥
that was great guys!
LIFE SAVERS!!!
Nice job guys!
Good job!!!! I’m getting one of those pullers!! LoL. You’re a cool guy to go out and have a couple of beers!
Ahahahahh
Very entertaining video, guys.
Now , that was awesome
Nice job getting the dent out guys
Subscribed on this one video alone... good stuff
You have to hammer in the crease with body hammer. Release pressure
Awesome video.
Used one of them before. I poured hot water on dent and it worked
harbor freight cups work great!
That’s awesome
impressive man!!
you can use heat gun to remove the sticker decal and when pulling dent.Heat make metal soft and easy to manupulate.
Epic job
Nice work
Good Job👌👌
You guys are so funny 😂
you guys did great and enjoying watching you . you are funny though . good job finally ...Red Biber is happy i am sure . finally hard work worth .
Thanks man
Nice job boys ! I was considering doing an insurance claim and was gonna eat $500 deductible. Didn’t have to !!!
Thanks !
Despite them not working on your trucks i would say those things work well enough My guess is you should heat the areas up with a heat gun and work some other angles and spots around the dents i kind of agree with your conclusion on purchasing several in order to work many areas at the same time on a side note ive replaced regulators on a older Chevy work Van and you needed. The super large pop rivet gun and special rivets i got from a freind who owns a repair shop and half of a Snap-On truck as he and his brother are certified mechanics and co owners
This guy spends more time talking than doing the actual job.
Damn that's a big dent! This would guaranteed work on my basic ass mazda touch n go dents from parking issues and dummies bumping into me
Great Vid.
Lol I love you guys You guys did good and it was entertaining but I love it
Good job
Bought my Chevy Colorado it's a 2004. And bought it for 600 couple months ago. And it's at 186k miles. But to the point I had to use one of these to pull a dent out of my cieling bc a tree had landed on it. It wasn't to bad but it was noticeable it pulled it out right
The tree thing in the intro is great
We used to use good old plungers!
I had a book somewhere on metal bumping it was a great read and informative another tip is to get to it as soon as it happens and its more likely to pop back the longer u wait the more memory the metal has. In my experience
Is it any good on general car repairs and do you remember the name?
@@dazzio187 it's on the dashboard of my work truck right now it's a paper back book.. I think it's called The Art of metal bumping.. I know it's red and black and white pictures
Cool and funny
Cowboys! Dear o dear 😂
😂😂very fun actitud to fix
Sound like a whole Virgo that's having fun with his work.
Hey thanks for the video man I'm going to get out of try I got an old car I don't want to spend a lot of money in and I think that will be perfect thanks again for the video
The door panel is super easy to pull out
What a fun video lol
A toilet plunger with a little soap works real good on dents, but if theres a crease its hard to get that out with just a plunger. Try using it on your truck.
Gotta love red beaver🤘
One of the funniest videos I have came across in a while. Btw that DIY was excellent. #Subcribed
THANK'S
You need to include more outtakes like that in your videos
I got one at my local store and it came out on the first try with boiling water. The one I had is 80lb laguna
Since it is cold there it probably would have been a benefit to heat the metal with a propane torch, indirect heat??
This is good video💪🏻🇫🇮🇺🇸
The moulding is holding the dent in. Pull the moulding off from right to left to release the dent.