WE BUILT UP NEW 16" BMX BIKES AND PLAYED A GAME OF BIKE!
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- We built up 2 brand new 16" BMX bikes at our bike shop and we decided to have a game of bike on them between Cory Burglar and Matty Cranmer! The rules were that everything goes and the riders came up with some very creative tricks on their new bikes!
Get New CAN'T SLOW DOWN Shirts Here! www.cantslowdow...
It could be the clutch but, I also might just be the heatshield on the exhaust. On Honda's it's normal to just remove the shield after a lot of heat cycles. Reason I think this might be the case is when the RPM's get low the exhaust shakes more and the shield might have warped enough to hit the Catalytic converter or Reso or Pipe.
this. those heat shields are notorious for coming lose especially being in the north east.
That's what it sounds like to me
Looks like we have all heard that noise before LOL
Lol it’s only noise when clutch is out. Not a heat shield
@@Tylersweird that's a solid point
Definitely throw out bearing!
I’ve had it happen personally. New bearing an fresh clutch an haven’t looked back yet!
I'm not a car mechanic or anything, but this sounds like the most likely culprit. Doesn't sound like a belt at all, and there aren't that many things on a car that can start squeeking really weird like that and not be immediately identifiable as something rubbing on something else.
Pro tip, if you pour a sack of concrete into your gear box it'll stop making that sound immediately.
I hope you had a great vacation. I like watching the videos all the time but if a rigid upload schedule burns you out I don't think any of us would be bummed when you take breaks. Some of my favorite channels don't have any real schedule at all, they just make videos when they get a good idea and upload when it suits them. Sometimes that's daily, or twice in a day, some times it'll be several days between uploads. Do what works for YOU guys. I'd rather see this thing go far in to the future than to have a few forced videos that causes you to burn out and give it up after a while.
Very great way to put it man!
Exactly
Gotta give a thumbs up for the groom! Congrats Vinnie!
I love the 16 inch bikes. It's like the pit bike revolution! So badass, gents.
Nailed it Scotty 💯 throw out bearing lol it’s easier to pull the engine than drop the transmission lol. Let’s see the matty the mechanic series
These little bikes are amazing! I want to see like regular weekly vids with these if you can. Take them with you places and just get crazy with them.
Yes! I can't wait for all the 16" videos. I've really enjoyed them so far.
Would love to see Ronnie come back for an episode. The day in the life of Ronnie
Almost sounds like exhaust rattling but may be throwout bearing
If it was exhaust rattling it would happen regardless of gear or clutch position... I'm 98% sure its throw out bearing
I'm going with the heatshield.
@@dlmperformanceandracing right, doesn’t have the tin can sound to it, I think throwout bearing as well. Heat shield is easy diagnosis anyways so just look it over guys! Keep up the dope vids. 👍🏼
@@dylanalmony7735 take it from a 11x turbo Subaru owner, throwout bearing lol .. always a problem with subarus, if it ain't knockin the driveline is on the shitter
Sounds like a dry throw out bearing. Time for some maintenance. Don't let it go to long
Congrats Vinny!!!
Those were a couple of great builds and what an awesome way to break them in with that game of bike, Thanks alot guys, I enjoyed seeing it.😁
Those 16 inch bikes look great. Nice to see you guys bringing them out, I for one would definitely like to see more 16 inch bike action but I would also love to see a race around the bike shop on the smallest kids bikes you have as a bit of a comedy video, that would be cool. You could possibly throw in a few chicanes, a couple of ramps, it could be like the kiddo bike moto.
I bet BMX Caiden can outride all you guys on those 16in bikes ;)
My car did the same thing it sounds like a exhaust Shield rattling if it was a throwout bearing it would do it in every gear and every time you push the clutch in or the clutch doesn't just come and go at stays hundred percent exhaust Shield or something under their rattling
not necessarily.. it probably only sqeals when it's spinning around a certain speed
I was thinking catalytic heat shield as well. It could be the bearing but it sounds more like a rattling of a heat shield to me. I'd definitely check that first if it was my car
Yeah definitely for sure it doesn't sound like you throw out bearing usually there louder and more metal on metal that's more like a rattle of a vibration
Honestly I would check your motor mount and transmission mount
Definitely a throw out bearing Matty, stop doubting Scotty haha
YASSS! Rematch in the garage. I'm for it.
Makes my day every time i watch your videos thx for that 🤘
Beat episode in a long time. We need more 16” bikes!!!
That was awesome I was just missing Dom always like watching him right he has a really awesome personality
Crazy seeing Matty go from a shy, single word talking dude who'd kinda rip on bikes
to a complete unit in every way :D
Man i broke my arm 2 months ago and with how serious your injury was idk how you keep a good mood every vid i see all i see is progress for you
Sounds like we need big Ricky back in here for this lol
Sounds like the throwout bearing to me. I had issues with mine in my '10 WRX. They're known for giving up earlier than should be expected
I love supercross, been following it for decades.
Matty's fastplant over the island had so much steez
Scotty we need you singing more island boys!!👌😂😂
Petition for mini bike obstacle course
Definitely that baring in the clutch
Nice Phil Wood spoke cutter! Best tool out there.
Congratulations Vinnie
Scott you have a good singing voice bro. I've heard you sing in a few videos and your voice is good man.
@scott @matty - check the pilot or throwout bearing - it is expensive to replace you're honestly better off selling the car used ASAP than you would be replacing. Essentially your clutch is gonna blow pretty soon so play musical chairs with it so it becomes someone else's problem. or rebuild the entire transmission basically...
Always great to see the boys
16 inch videos are life
Yes new vid!!!!
I think Cory would be unstoppable on 18" wheels.
He's already a weight weenie. Less wheel weighs less than more wheel. Just give him some 140mm cranks and it's game over.
That bike is actually about the same hight as Corey ! We need more videos on these
Hey man it was nice meeting y’all at the race
Thank you for the longer video I loved it you guys should do 16" bikes on big ass ramps
Cory on a 16" is pretty wholesome.
It looks like a nornal bike for him 😂
PLEASE do more 16” bike content
Your bearing has thrown out! 😂😂. Once you pull the trans check the shift fork also just for normal wear and tear 👍 Excedy Stage 1 clutch!
OMG... He did NOT sing "Island Boys" at Matty. I now have ADDITIONAL brain damage due to those idiots! 🤣 I did love they got booed and kicked out of watching a fight LMAO GO JERSEY!
Vinny does this in every photo 😁👉🙍♂️ hahaha
Sounds external like a heat shield on the exhaust to me.
It's either the throw out bearing or more commonly the throw out fork needs greased up. Being it only has 81k its not likely it needs a clutch already unless Matty is launching it all the time. I'd say grease the for where the slave cylinder pushes to disengage the clutch first and if that doesn't fix it then do a clutch and throw out bearing and flywheel.
That's a rock between the breakshield and the brake... Go back and forth a couple of time and hope it falls out.
Finally A Cory Sized Bike 🚲
Squeaking noise is likely the throwout bearing. Get that replaced and a new Exedy replacement clutch if he wants the stock feel if he hasn’t replaced the clutch yet.
If the noise goes away while he has clutch is in and come s back when he's off the clutch it's definitely the throw out bearing.
I saw you guys at Gillette Stadium but I didn't want to bother you! Just wanted to say I love the vids and I've been watching the channel since the beginning. Keep up the good work!
Tell me why Cory looks fried when he finally got to the shop 😂
he has earned that right.
Have a feeling this was filmed on 4/20 lmao
If you haven't noticed bk all day and Cory are stoner's trust me a fellow stoney knows a stoney. And I few videos back bk is at Scott's house doing a project and on his back pack straps weed leafs spray painted on them lol.
weed is the working mans drug ( not really because basically all jobs test for it nowadays) but for real it immediately fixed any long stressful day, and always wake up feeling great the next day.
@@stuartwalker6409 i hear ya.
Thinking it's the throwout bearing!
Your stock room looks like the Harry Potter wand shop with all those boxes 😂
*Game of BIKE* for every trick landed the bike sizes gradually get smaller and the trick on the smallest bike wins.
We need Matty to fab the 360 camera into a peg. Not really to grind but for whips and tricks. Sick angle and projected in the peg
It’s the clutch platesss!!!!!!!!
Great choice 👍🏻
😭😭 Matty goes “16 might be a little big for you bud”. lol i couldn’t stop laughing
Now you need to do some 24in bmx bikes.
Should do it at corys garage. Yours and Marty’s ramps. And then the worst local park. Best out of three wins a trophy.
Love the 16in bikes. Definitely bring them to a skatepark !
Throw out bearing for sure. I’ve been a mechanic for awhile and I just changed one yesterday. Change the bearing and clutch and you’ll be back in business.
Thats a heatshield rattling on exhaust bud 👌🚗
Yup definitely throwout bearing. Time for a new clutch!
Ive got the jet fuel 3 piece snafus on my nukeproof 26" dj bike. I was like yeah, when brooklyn held up the matching bars to match the pedals.
Time for a new bearing and new clutch.
Sounds like a throwout bearing!
While I do love the jokes. I still likes all of Mattys ideals. Kept it interesting. Plus he’s a madman. Salute boys !!!! Love these 16 inch videos. Time for a real park session
Absolutely is his clutch and throw out bearing
Round two gob at your private skate park!
Sounds like the clutch could be the clutch plate or the thing that bearing that puts it into gear
Could be something as simple as a heat shield but sounds like it might be the throw out bearing
You guys should do a mini rocker bmx challenge
These are gonna be the new rocker bikes in the next 6 months.
“ your light is different then mine “ 😂 im crying
2015+ wrx do have a TOB bulletin. Although, when my TOB issue arose it was only squeaky inside the car and I don’t believe it was that loud either
mattys bike reminds me off a haro backtrails i owned back in 1998. although i have not seen it in 20 years.
Perfect timing!
Awesome 👍
Time for a clutch job homie
The blinker fluid is out! Lol
Wrxpert had me howling!! I'm definitely stealing that haha
Heat shield around catalytic converter. Go to local exhaust shop or come down to mine in Fl lol unless car is having issues with shifting then it’s clutch/throwout
Game of bike with Spencer at Woodward
Throw out bearing is toast
Sounds like a heat shield on the exhaust. When he lets out the clutch the heat shield rattles from the vibration
Watch this summer the trend at the park will be everybody riding small bikes.
Marty doing a Scotty line
maybe the bushing attached to the drive shaft
you got it scotty. throw out bearing id assume
Its definitely the 3rd brake light bulb 💡
Love you Scotty!
Check the heat shields around the exhaust
Exhaust shield rattling would be my guess.
you should get a camera stabilizer for your videos.
Content quality upgrade.
scotty u a legend fr
They did pretty dang good for being so new to that size of a bike for sure.
Sounds like the heatshield around the cat converter.
Exhaust hanger bushing
Standard Subaru tings