ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Check out my Patreon! - / jackwood25
In this video, I showed you guys how to make string art. This is a perfect gift for any ocassion and once you get the hang of it, it'll only take a few hours to Make. All the materials can be found at Home Depot or Lowes and if you have any questions, I'll answer them in the comments. If you haven't done already, make sure to check out my website for so cool woodworking products. Thank you guys and enjoy!
MY WEBSITE - jtwoodworks.org
Amazon Links for materials:
String that I used: amzn.to/3pGVUCT
Nails (Will need about 200 nails): amzn.to/43iFcHw
Spray Paint: amzn.to/3XL9P7E
Wood: amzn.to/3POi7cW
Maria Kavaka's channel - • 2 big pictures | STRIN...
Music:
David Cutter
1st song - Wine
2nd song - Float Away
www.davidcutte... - แนวปฏิบัติและการใช้ชีวิต
I can't believe how much attention this video has been getting over the past few months and its amazing. I recently added this string art to my website, jtwoodworks.org, so if you guys want to buy your own, now you can!
I'm doing this design on a significantly smaller scale, and this video was really helpful for me to understand how it all goes together. Thank you. ^_^
I’m m glad it was able to help. Hope it turned out good!
Do you know what your board width and length was for you scale? approximately?
I love how you start with feet and inches for the size of the plywood, then quickly changed for centimeters for the distance between nails hahaha Thank you for the tutorial, that's the best one I found, even 3 years later! I'll try one now hope it will end up as good as yours!
I know, I was all over the place with measurements. I’m want to make an updated video with better instructions.
Hello Jack. I did some string art when I was about 5 years old in school, I am now about to turn 71. I am really wanting to do some string art but don't have a clue about how to achieve the look I would like. I love the art Deco era and have just decorated my living room in touches of it. It was all about shapes then. Arches and curves but also boxes and lines. I just don't have a clue how to go about this. Can you help. You have been the only tutorial that really caught my eye. Also, well done with that piece as it looks stunning. Shirley from the UK.
The measurements are wrong on this video just so everyone knows. It’s not 19 1/4 like he states it’s supposed to be 50 cm wide which is about 19.7 inches. I just found out when I tried to draw my lines.
What type of threads should we use for this or projects similar to this? Also, how much do we need for this piece?
Loved this video, and the cool end result. My only complaint is that the audio cut out almost completely about halfway through. Thanks for sharing.
I’m sorry that you were having trouble with the audio. I really need to get a microphone so when I do, the audio will sound much better. I have some videos that I’m currently editing so I’ll make sure that the audio quality is better than this video.
Hi Jack, I’m a new subscriber, i would love to see you make a buffalo head Please🙏🏼
Hey @Jack, I am a beginner and I would love to do it so much, may you please guide me, what kind of string should I use? Wood materials & I didn't get you well how many nails have putted from one nail to another, if it was cm to another or what.... Kindly assist.
Did it and came out beautiful!!!! Thank you for the guidance 🙏
Cooles Video ich habe auch ein neues Video
You say that there are 109 marks needed in the diagonal. Do you count both of the corners as a mark? I did it exactly like you sad, but from corner to corner I do have 110 marks.
It’s okay if you have 110 marks. I’ve built this a few time before with more than 109 marks. Just keep following my video but when you add the last color, you’ll have one more nail to pass and you color may overlap at the middle of the diagonal line. If this is still confusing to you, I’m here to help.
And yes, count both corner marks.
Can you tell me the math how you figured out the nail count?
I bet this is not a trail and error.
Please let me know .
Muy buen trabajo! Podría mejorar la filmación para ver bien los pasos. Gracias!
Would it be easier to use the ruler to find the 14th, 21st, 28th, etc nails since each point was a cm apart? I love this video. It helps to draw/paint them also. Although I’m thinking I might like to paint the background and use string art to intensify the shapes. Thanks so much, Jack.
Yes, it would be much easier to use a ruler to find all the marks. I didn't even think about that until I read your comment. I also really like your idea of painting the background then adding string. That might be one of my future videos! Thanks for your support.
I know this is an old video. But i cant hear you, and the music is unnecessary and super loud
Sorry. Since posting this video, my camera gear and editing skills have become much better.
Hi I need your channel I'm going to subscribe this is my very first time so I'm really excited I love string art it's one of my favorite things and I'm thinking about doing something in my bedroom on the wall we have an agency kind of thing going so I was thinking about maybe some koi fish in a yin Yang or no I was just trying to think of something do you think you could make something like that? I'd love to go look at your shop and see what you have!
Love it! How do you know when you’re starting I new project how many nails to start off with or what number nail to start and end with?Thx!
I sure wish i could hear what you were saying.
That would have been helpful.
(The artwork caught my eye)
Good job.
I'm sorry that you weren't able to hear the audio, I'm working on getting a microphone.
Hi Jack!
Could you please tell me how long are the nails you used? How thick is the wood? ❤
Appreciate your help ✨
Great tutorial Jack hope u do more..... Whiskers Wayne 😊
Thank you so much for guiding us, I love how you explained everything as it is,...most definitely going to try this one❤
Awesome! Hope your project turned out good!
Can you make the scuba tank?
Sorry I haven’t made it yet, I’ve been really busy with school but it will be the next video that I post.
Ok 🙂🙂☺️
I wish u could make it a bit slowly so that the beginners can follow it .
Sorry, this video is quite old. I'm planning on making a better, updated version.
Hey mate. Could you please send me the dimensions again. I'm in nz and we do things differently. Just easier to read than listen and try and write down. Would greatly appreciate 🙏it.
Hi from Canada .
I would love to try and make a beautiful piece of artwork,like yours. Maybe you could tell me where the best place is to buy nails. I have been looking online. They seem to be a bit pricey.
Hope you can help me .
Love your work😊
I generally purchase them from Home Depot. Although, I don’t know if this store is in your area. You really only need 1 inch, or 2.5 cm long picture hanging nails. For a pack of 200, it should cost you more than $5.
@JackWood25 Thank-you, yes there is a Hone Depot near me. I will definitely check it out. I can't wait to get started 😃
This is amazing can’t wait to try it !!
woah epic at its finest epicness
Your comment is of most epicness, thanks!
It's a beautiful can you tell me which threads will be used
Am love with this work..!! Please post more string art tutorials
❤❤❤
Quero fazer uma roupa de string e tirar dos pregos, sou de Salvador Bahia
Parece um projeto bem interessante. Penso em algumas ideias.
Nice project but your audio needs some love.
I know. Since posting this vid, my editing skills have become much better. I also have a better editing software.
Great tutorial. Concise,precise and vocalized well. Thanks for posting.
It's nice bro pleas show as how to do this on picture
I’m sorry but I don’t really understand what you’re saying. If you try rephrasing it, I might understand and could answer your question.
congratulations ... can I know the name of the wire? brand and thickness number ??
Hey so I loved this video but im pretty sure 19 1/4 inches equals 48.895 centimeters. soooo If we're trying to put 50 nails down, one centimeter apart each, with a half centimeter border......
Sorry but I meant to say that the width is 19 3/4 inches. Got to say it to you though, nice for spotting that mistake!
Thank you for sharing this wonderful idea... 👍
Wow. I’m very much interesting to make like these . Thank you.
can you try the same technique to display human face.
I can help you on that
Yeah, I’ll definitely try to make a human face. I’ve see video about them and they look pretty challenge but I think I’m up for it. Nice suggestion!
@@JackWood25 We can work together
I have written algorithm to extract what all nails to connect in order to get a face.
mail me at parun.sagar@gmail.com
what string are you using
I don't know off the top of my head but I left a link in the description to the exact string that I used.
Beautiful work, Thanks for sharing.
Could you do a square, magic eye tutorial?? Love this design!! Thank You! 🤘
Great idea! I just looked up some photos and that projects looks awesome. I’ll get working on one as soon as possible. Thanks for the video suggestion!
Already, just with the shadows at 3:30 😅
Very very beautiful 👏👏
Thank You!
I love this!!! I used to do string art as a teen… here I am years later watching this and my ADD brain is saying, say huh do what?????
Good job!!!
how much dimension of playwood ?
What size nails do you need and how thick is the thread?
It doesn't matter what size nails you use but I used 3/4 inch nails and the string is about 0.125 millimeters. I have a link in the description if you want to purchase the thread I used.
I can find the nails pretty easily but as I live in Germany they sometimes have different descriptions for the thread and wool than the US. It sounds like its really thin like you’d use to sew something like clothing or is it thicker? Could the thread fade?
I’d love to try this but not sure if I understood which nails to where:(. Maybe if i play it back on slow.
Yes the thread is very thin and it's used for sewing but you can also use thicker thread if you want. It's up to you to decide. The thread will most likely fade only if it is in direct sun light for multiple hours a day for many weeks. If you build one and display it inside, you should be fine. If you have any other questions, I'll gladly answer them.
Thanks very much, it’s plenty to think over. Well done, you are very talented.
Thank you!
The design is superb. But, sorry to say that audio quality was very bad and the person who was filming did not move the camera properly especially every new thread after tying the initial nail and then goes where could not make-out.
I'm sorry to hear that. This is one of my older videos and, since then, I've upgraded my video editing software which greatly improves audio quality. I've also been working on my filming techniques. Hopefully, in the future, my videos will be much better than this one.
What type of string do you use
Its just common sewing thread. There is a link to the string that I used in the description.
Very nice ❤️❤️❤️
Can we get the thread on Amazon?
Yes, you can. I know this video is quite old but there should be a link in the description. If it doesn't work, let me know and I'll comment another amazon link to similar thread.
Suggest having the music at a much lower volume in future. Your voice was almost inaudible while the music was obnoxiously loud when it cut in.
I know. This was not one of my best videos in terms of audio. Since I've posted this video, I've gotten a better camera with a professional rode microphone. Hopefully this setup will have both better audio quality and video quality.
100 subscribers! Nice!
Добрый вечер.У вас замечательные работы.Тоже хочу так научиться.
It's just waoo appreciate
I wont to learn this one can yu help me
what kind of string and nails you use?
There is a link in the description for the type of string that I used and for the nails, I used 1 inch, picture hanging nails. Any type of nails work as long they’re under 1 inch long.
Можно пожалуйста схему?Плиззззззз
cou;dnt hear a thing
Sorry, this video is quite old and I made it when my editing skills weren't the best. I'd like to make an updated version.
The volume is really up and down on this video. The music is too loud and I can't hear your voice
I know the audio isn't the best. Since posting this video, I've purchased a better camera with a real microphone.
What kind of string do you use?
I have a link in the description to the exact type of string that I used. It’s essentially string that you use to sew clothing, it’s very thin.
When I do string art I usually go from one nail at one side to the other side then I loop around the next nail on the same side before I go to the second nail at the first side. By doing it that way you will have more "parallel" lines which enhances the illusion giving it a more 3d effect.
Ahhh... sounds like a cool technique. I'm thinking about re-making this video so I'll make sure to remember this. Thanks!
WOW, that is amazing. Good job. One thing though, I barely hear what you are saying, the music had taken over your voice. Thanks for sharing.
Thanks for your comment. I made this a few years ago when my editing skills weren't the best. Sorry if the quality was bad.
@JackWood25 do you have a specific high and type of nails you are using?
💯
Thank you!
from Argentina this is amazing!!!!!!!!
Ye aap ne kon se wood ka use Kiya h
Hi can you tell me the exact length and width of the wood?
My son had some of this art on his apartment wall. I took several photos hoping I could get into this one day. It somehow reminds me of the heavens in a near death experience. I am her now and I believe you are my teacher.
I could do without the music. I've had to mute and follow the cc directions.
Sorry about the audio, hope your project turned out well.
Its very nice ;can i have this work pattern please
Uau!!!! Parabéns!!! Ficou perfeito! Vou tentar fazer.
Nice
Love the art work but could hear you
very good
Thank you!
Very neatly n creatively done.. Perfect.. Wanna know.. Which number of thread used means thickness..
So sorry to be responding to your question this late but if you're making this project for yourself, the thickness of the thread is up to you. You can decide. If you want the thickness that I used, the thread is roughly .0163" or .414 mm. if you're wondering the number of the thread, I'm not sure what it is but I have a link in the description to the thread that I used for this project.
Love this but what kind of nails are you using? please
Sorry to be responding this late but the nails that I used are just 1 inch long, picture hanging nails.
You could teach a course, I would love to take the course with you. Even if I don't speak English, but I think I could learn with translation.
That’s a great idea!
Maravilhoso!!!
Bellissima questa arte!!! È possibile avere la traduzione in italiano
Grazie! Vedo se riesco a far avere i sottotitoli in italiano.
Go Cubs!
Badass!!
Very interested,
Pleas can I know the thickness of the strings you are using?
There is a link in the description which has all the specifications about the string
beautiful i also want to make this😀
It loos amazing... eyecatchy
Thank you!
Such a wonderful work but can you show us a little nearer to the camera how u brought up the colours just watched up and wanted to try it
Yes, I’ll be making another string art video very soon and I can promise that the video quality will be much better
Hello does this piece have a specific meaning or massage?
My main goal with this project was to make the piece look like a sun set/ setting sun. There isn’t really a specific meaning or message but that’s the theme.
Bravo! Amazing art work...Thanks Jack.
Wow
Hey Jack, this is such a wonderful work, but I just wanted to ask you a question.. I’m planning to do this work but in a bigger size and I wanted to make it in a 150cm length and 65cm in width (or could you pls describe a suitable width) I would like to know what would be the dimensions for the nails and could you pls tell me from where I should start and also how much I would have to add in the diagonal line. Thank you so much for this video, it’s great 👍🏼
I’m glad to help but right now I have to study for some big tests that are coming up and I don’t have the time at the moments to measure and figure out the dimensions that you need. I’ll be able to get back to you tomorrow morning. Sorry for the inconvenience.
Ohh, that’s fine we’ll get back with you tmr. Thanks for the reply
Sorry to be responding so late but I think I figured out a solution for you. In my tutorial, I explained that there are 50 nails, 1 centimeter apart from each other and half a centimeter from the edge, on the top and bottom and 109 nails placed through the diagonal. I know that you want yours a little bigger than what I demonstrated. If I were you, I would keep adding nails on the top and bottom until you're half a centimeter away from the edge. Say I placed 60 nails. On the diagonal, I'll do the same. Add more nails until I reach the end. Say that I have 119 nails on the diagonal. Because I've added 10 nails to the diagonal and on both ends of the sheet of plywood, I would divide that by 2, to get 5, and add 5 more steps or loops to the string. When adding the string, in my demonstration I strung the white string around ten nails but since the board is bigger, I'll loop the string around 15 nails. Of course, this will be different because your board size will be different. Just to recap, count the number of nails that you'll add to the end and the diagonal, divide it by 2, then add that number when adding your string. If this is still confusing, just leave another comment.
Thank you for the message, we’ll try it out and let you know how everything went. Tysm Jack
@@tomymathew9100 no problem!
Athu enn 1st year
Nice videos but can someone help with the dimensions of the wood in centimeters
So sorry be respond a month late but the dimensions of the wooden board in centimeters are listed below:
Length: 100 cm
Width: 50 cm
Thickness: 1.27 cm (1/2 inches)
Can someone please tell me the numbers and sequences of colours/number pls ?
Hello, I'm so sorry to be responding this late but I'm a little confused by the
Procedure is not clear enough to see , so replicating this may just be impossible. But you did a nice piece
No entendí nada de lo que dijo pero que belleza 😍
Siento que te haya costado entender el vídeo. En el futuro, definitivamente haré uno nuevo.
Thank you for the video ❤️
How deep to hammer in the nails?
Hammers the nails in about 1 cm
WOW
Very very beautiful 👏👏
Thank you! Hopefully soon, I'll be able to make an updated video with better instructions.
What size nails did you use?
I used 1 inch long picture hanging nails.
Brilliant.