Build it: DIY dry tumbling trimmer. Avoiding sizing issues.
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Easy to build if you’re a diy kinda guy. If not, I have them on eBay.
Greetings and Welcome 💚💚💚 from No Greed Seeds, Home of the Stalk Exchange.
US Seed Bank - Strains under $10 ALL THE TIME! 👀
Thanks for joining us as we all tune in, turn on, opt-in, switch off, and smoke out! ✌️🥳
👇
Links:
HQ: www.nogreedsee...
TH-cam: / nogreedseeds
Facebook: NoGreedS...
Instagram: / nogreedseeds
eMail: inquiry@nogreedseeds
GrowGang Chat Channel: / discord
☝️
Music by =[ Soluna668 ]= or [[[ Brother Randall ]]]
___________________________________________________________________
Immediate questions and concerns 🧐 should be addressed to inquiry@nogreedseeds.com
See giveaway winners here: www.nogreedseed.... 🧐😯😂🤣
Most drawings have a 1 in 10 chance of winning!
Thanks to everyone watching, don’t forget to click the notification bell 🔔 to keep up with contest Notifications, Product reviews, New seed drops and Soluna’s perpetual grow updates!!
Peace ✌️🥳💚💚💚
The 18” build will do a half lb with no trouble. The 36” will do an lb easily. If the RH is around 55% the leaves should snap off easily and about 10-15 minutes of tumbling should be all you need. The total cost of the 18” build, not including all of the mesh roll, is about $30. The bigger box can be quite a bit more. Total time for build with a little help is about an hour.
Just put like two screws sticking up on each side of the tote so it just rests on top instead
Of trying to thread it inside the tote. Also gives more clearance
Pretty KooL 😎, I remember the last one you made 👍👍
Nice sir thanks for sharing ✌️
Thank you!!!! I'll order one on the third .great price!!!
Awesome!!!
Hey there! Awesome build. You don’t have any more available on eBay, do you? Thanks!
No, but I could do one shipped for about $100. It’s shipping that makes it expensive.
I just need a small one!!
I like that your brain works just like mine, measure twice cut once... fck that we'll engineer it as we go. Great idea and I'm sure you got a production line going by now.
Can't find on eBay ?? Others are so expensive! Do to disabilities I can't build my own but would rather buy one from you. Can you tell me how to get one?
Here ya go. www.ebay.com/itm/195287083141?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aot3n_VbTfW&sssrc=0&ssuid=aot3n_VbTfW&var=&widget_ver=artemis&media=COPY
Hey
I'm short on cash this month .I should be able to get one hopefully next month on the third. Sorry
Great vid! Very similar to mine using same cloth and lids. Tip. Friction fitting holes is a PIA with these materials. Instead build a stub axle to positively drive with zero slippage. Only adds a 1/2" tee and elbow to the build. My 30" model trims 1lb of 60% humidity material to 85% finished trim in 15 mins. Drop humidity to 50% (danger zone) and your done in 5-10 minutes. Ready to bag and tag.
@@joem3358you have any vid./build guide of your tumbler? ;)