Permanently joining the boots is a good idea - but I think you'd be best off still rounding off that bottom corner somehow. Currently it's a very harsh vertical line that looks a little unnatural there.
Even just beveling it would probably make a big difference if it’s going to be adhered anyway, but agreed, it’s a very blunt line without doing something
On a side note: It's so sad that knee high boots for guys are not in mainstream fashion (anymore) and veeeeeeryyy hard to find. First, because it looks damn foine on guys. Second, because I hate buying women's boots (they never have my size and/or look girly. I wanna look badass).
@@gandalftehdank6052, you have a very good point and to it I agree. I think it’s far better to have the skill to make the boots or up cycle, like what we see here.
@@williamjames5321 It is. Indeed there are few fields in life that do not thrive once you master its ways and stop relying on others to do so for you. Self-sufficiency is perhaps the closest thing to freedom on this Earth.
I’m a woman (with extra-small feet) and I have been struggling to find good mid-calf to knee-high historical-looking boots for LARPing as well 😢 Also, women’s boots are almost universally lower-quality and fall apart way faster than men’s boots from my research.
I was so moved by your email and I wanted to make sure I responded in the best way I could. I hope your sun enjoyed it and knows that he is awesome. You are awesome as well for all you do for him and the encouragement you give. Thank you both for watching😁
There is one scene in DreamWorks "Sinbad" (the animated one) and one of the pirates gets stopped from entering the party and is told he has to leave his weapons at the door. He then procceds to spend _the entire time_ they are at the party unloading his weapons array, finally taking they last one off just as Sinbad decides to leave.
@@DH-xw6jpoh that scene is a comedy gold. Similar scene was in pirates of the Caribbean at world's end, when they arrived to Singapore and Elizabeth was pulling out various guns from her pockets and Barbosa was looking at it confused
That is a GENIUS solution to a very common problem! Good boots are definitely pricey, and 'costume' boots aren't worth it for lack of ruggedness. For those wanting to get into LARP but don't (yet) have the skill or confidence to pull this off - most LARPs have some great amateur leatherworkers that would likely do this work for you at a fraction of the cost of new boots if you hit them up with the link to this video! Sharing is caring! =D
I'm looking forward to seeing what your full kit looks like. The biggest thing I'm appreciative of your videos is that you speak of prices and ways to budget. As someone trying to get into and understand this hobby. Not sinking too much into it when getting started is a lot more welcoming than staring at the paywall of some very expensive items online.
Some practical advice that I offer to you is that when I started, I looked for leather in places that normally ppl wouldn't typically look. Garage sales, Goodwill/Salvation Army/Thrift stores, etc. I would almost always buy whatever leather garments (old jackets, mini-skirts, leather pants, leather sofas, etc) and reclaim the leather from those goods. Granted garment leather is very thin but the good thing about that leather is that you could use it as trim or leather bias tape. For leather type armor....old saddles and tack. It's thick enough (anywhere from 9oz to 12oz) depending on which type of saddle you get secondhand. English and American saddles are completely different. But a brand new double shoulder currently is about 90$ for 8-9 oz. more if you want thicker. I bought 2 broken american saddles that were busted up for about 50$ a few years ago. Cut the stitching and harvest what you can. The best part of buying old busted up saddles....they are all ready 'battle scarred'...i.e. holes, no fuss to antique it, scratches, weathering, etc. Auctions and estate sales are another way to find used leather. Again, look for anything with leather. Most of the tack used for horses have buckles and such already built into the reins, halters, bridles, headstalls, whatever. Same goes for leather notions. O and D rings, brass/nickel clips and snaps, you can usually find fairly cheap at home improvement centers instead of buying from a leather goods store. And at the garage sales and thrift stores, for those notions on sandals with buckles, old purses/bags, whatever you can find that has metal hardware. I used hardware (4 buckles...2 from each shoe) once from an old pair of sandals to use on a pair of bracers I made. I paid 50 cents for the shoes. If you've a Hobby Lobby near, check their weekly flyer (either in-store or online). Every once in awhile they will run a Leather something discount (if I am correct, somewhere between 10 to 15 percent). While they do not have the most extensive collection of leather, they do have basic tools, waxed thread/sinew and notions. My favorite leather to buy from them are the scrap leather bags. Usually have enough decent pieces for smaller projects. Hit up some upholsteries as well. See if they don't have a scrap bin that you can burrow through. (this idea just hit me) Anywho, happy hunting and good luck.
This Larp-gear series is the most helpful thing for beginners. You cover all the things you struggle with to get your hands on: Shoes, rain proof clothing and even the freaking tent! It's great! To answer your question: These are your Larp-boots now. If they gonna fall apart soon anyway, don't use them up not larping.
This is such a good idea! Shoes are always the hardest part of a kit because unless you're looking to spend serious cash, it's going to be very hard to find something comfortable that fits the vibe. Definitely going to use this idea.
Want to do these for my Jedi robes, too. Came up with basically the same design myself a while ago, with some minor differences like a strap that goes around the sole in front of the heel and a piece of leather that covers the instep and lacing. Seeing this vid gives me confidence to actually start building them (as soon as I'm finished with my woolen coat ;) ).
These look so good, I'll have to try this at some point. I'm a wide footed, huge calf girl so shoes are not my friend and I've been looking into customizing some and this definitely helps
This man is beautiful and a treasure to the TH-cam larp genre! Wonderful energy and his excitement for larp and crafting is contagious. A fav new subscribe for sure.
Your channel really humanizes some of the more intricate sides of leatherworking. Making professional level pieces doesn't have to be overly difficult. Thank you for doing what you do. Additionally, there are some really awesome cobblers out there making videos who I have gotten some really solid tips from for any footwear leather projects I will do in the future.
Fantastic idea for some great looking boots! We do like the idea of making these boots, legit larp boots, and attaching them permanently, but if we may suggest, cut the corner on the boot you mentioned, match it to the already made seam on the Tims, then rivet or sew into place. We feel that by following the seam line, it will take these boots to a whole other level of coolness, as you would be continuing to use the Tims design to your advantage and adding in your own flavor, and it would all blend that much more. Either way, Thank you for the video and the great idea! Excelsior!
This channel really deserves more subscribers I love the channel you've gone over so many projects and even items I spent years looking for diy projects for and couldn't find
Love the positive message at the end! I like that you are honest about what you don't know and what you learn on the way! I'm new to leather myself, and I love watching your vids! ❤
First congrats to your first LARP!!! Second: good idea! I have made my first boots for a dwarf char with two rainboots that I covered with fake leather and a fake fur trim at the top. With some painted foam I made a steel toecap and glued it all on with hot glue and some industrial glue. Held well especially in muddy weather and it forced me to alter my gate which helped get better into character. I will try your idea for some casual boots soon, as I have found some old leather in the attik.
Someday, it’d be cool to make shoes from scratch. You could have a woodworking episode about making a last, and then a leather working episode about making the liner, upper, welt, and sewing the sole. It’s not a very budget project, admittedly, but it’s a heck of an exp-booster.
You could potentially skive the edges of the leather panels to make it have kinda a smoother transition from one to the other, which actually brought me to another thought. I first learned about skiving (which is like cutting the flesh side of the leather's edge in this kind of scalloped motion to create a gradient and make a leather seam smoother) with a video about making oxford shoes, which often have broguing. You've got some nice long seams on these boots that you could add broguing to for some really nice detail
I have a pair of old combat boots I use. I have a set of leather covers as well that wrap over them to give them a better feeling. Something I have seen in the past is people using EVA foam or even piping insulation to make "armor" to cover more modern boots to give it an armored feeling and hide all the modern sides. Someone once made a bit of EVA armor look like wood/bark to cover their shins and hide the modern boot. This is a wonderful option! Thank you for all help in this for my own larp
I recently came across your channel, and I was instantly HOOKED! While I'm not into the LARP scene, I do find your channel content and presentation VERY enjoyable. Your enthusiasm and mannerisms are very entertaining, and I've picked up a few pointers and techniques that I certainly see myself using in my leather working/woodworking/metalworking! Thanks for your time and energy spent making these videos!
dude it's been so long since I so enthusiastically subscribed to an account, absolutely love what you do and the passion you do it with. you've given me SO many cool ideas to work on
This channel has quickly become such a source of comfort,iv watched most videos at least 3 times right now as I draw and its inspired me to start leathercrafting. So thanks to the skillshare dream team,love you guys!
This really raised my spirits on a sucky day. It won’t be anytime soon, but now I’m even more excited to work on getting my whole LARP costume together, especially with this genius solution to the same issue you experienced
I've been binging this whole channel for the past few weeks and it blows my mind that you don't have way more views and subscribers. High quality videos, high quality content, and high quality craftsmanship. This is my new favorite channel 😁
New here. I've been binge watching your vids. Love the geekcraft. Just watched your buckler vid and a bunch of your LARP gear vids. A skill I'd love to see covered is a LARP safe Spiked Pavise shield? Its a larger strapped shield that also has an offensive spike, but in a different place. It would be awesome for LARP as its both defensive and offensive.
Absolutely you should sew that part down and make it part of the boot. As a long time leather worker, I can tell you that is likely to curl up if you don’t. You did a great job on the design. Well done!🐝❤️🤗
The look veg tanned leather takes on if you don't stain it, and just wear/use it from when it was pink is incomparably beautiful, completely unobtainable with stains or paints. I get you don't have the luxury of not matching with this project, but for others, starting with that pink new leather look and letting it age in use it looks sooooooo nice
I found your channel yesterday and love the enthusiasm that you radiate as you make your projects, I'm currently in the midst of binging all you videos. The projects are neat and very fun to see and perhaps one day make myself, but the thing that makes me love the videos is your personality. Keep going strong, you've got a new sub in me! :D
Okay 1. Amazing job! 2. Totally gonna use your video to make mine for renn faire 3. You should definitely make them into permanent boots 4. In case I didn't mention it, Amazing Job!!!
That is an awesome projects. I don't larp, but we have outfits for medieval fairs, and it is so hard to find good matching footwear. I might have to make these. Thanks for sharing!
I love how the front flap makes it look like leather grieves. And i saw someone say something about putting a dagger sheathe in the boots and thatd be cool, you could also put a whetstone and fire striker pouches
You need to make a leather costrel (water bottle) for LARP events. Townsend has a great video on it. Your leatherwork skills would be overpowered for that project but a great project to share. And you can learn/teach about waterproofing leather with either brewers pitch or beeswax. I got beeswax from our local farmers market for almost half the price of Amazon.
super cool! reminds me a bit of oldschool equestrian gaiters. It also occurs to me that a lot of fantasy characters get around on horseback so this totally makes sense thematically :)
Id stitch them to the boots, but use a hand awl for that process. That way you can reuse them on another pair of boots later and follow your original stitch holes. With those uppers being vegetable tanned, you could get them hand tooled (unless you can do it yourself) and put some type of crest or personalization on them. Since typical garments were lifetime garments back then, those could be your lifetime boot uppers that you make decades of memories with...and maybe even mark and personalize them as your experiences grow.
Another thing to use instead of light foam which acts like leather for pattern making is covering a paper pattern with a layer of duct tape. Really useful if you want to play around with the layout as it lets you cut, test and then reattach until you like the fit.
Don't know if it was suggested already, but I would like to see you make a treasure chest. The classic kind we all remember with the rounded lid and metal banding.
I have such a hard time finding riding boots because of my thick calves and while I don't currently own any ankle boots i could do this with, it will make shopping at thrift stores so much easier now I know what i need to look for. thank you so much for this! i'm excited to get started!
This is exactly the tutorial I’ve been looking for!! I have a bunch of scrap leather I’ve wanted to work with for ages but I’ve been unsure how exactly to go about patterning a boot cover or modifying a boot in a way that looks convincing.
I have enjoyed your videos so much and have gotten so many ideas from them. I'm currently stitching the seat part of my own staff of the wanderer. I don't have money for leather, but I have some scraps. For the seat I got some brown duck canvas. I cut it about how your staff seat is and I'm currently stitching some leather corners onto it.
How had TH-cam taken this long to suggest your content to me? It's right in my wheelhouse. At least now I have the back catalogue to catch up on. I also dislike those little bits at the bottom. I would probably go with a combo of the 2 options you mentioned. Follow the curve of the original boots stitching and then make it permanent. Especially if they're racing reaching the end of their life you can give them new purpose. And honestly, they look cool enough that I can see them working with some irl outfits.
If you want a semi permanent fix for that little flap of leather towards the bottom of the boot you could rivet on some button snaps to fasten the flap to the boot
I'd suggest thinking about removing the bottom part altogether not only to get rid of the flaps but also to free your heel. Now it looks like it's being stiffened and held in place by the spine of the shaft and prevents your foot from i.e. fully stretching out, like standing on your toes or laying your foot flat on the ground when kneeling or tilting to the sides. Also you may want to think about the comfort when wearing spurs or other attachments now and after. By cutting along and under the line your ankle forms in the shoe (like greek/spartan greaves do) the flaps would not protect the lower part of the shoe/foot anymore and also one might argue that you'd end up not having "complete", one-piece boots anymore, true, but in change you would get very stable, fancy and fixed-to-your-shoe gaiters that, imho, while still giving a fair impression of a one-piece boot offer a much wider range of movement and especially much more additional creative use! And we all know how much we like that ;)
These have given me the idea to make some boots for myself. I’m starting to get into leather work for knife making and this would be cool for when I go to a Ren Faire
As someone who has larped for 20+ years, the only thing I would suggest you do (because these look great), is not an aesthetic change, but more of a quality of life change. I noticed that the tread is almost gone on the boots you used, and when you larp, you Will run into mud or wet grass at some point. Those soles you have on them will slip right out from under you in the middle of a fight at the worst time (usually when a BBEG is about to lay waste to your group). Have a Vibram boot sole put on and get rid of the ones you have now; the back side of your pants will appreciate it.
You should use snowseal to water proof your foot wear, I use it on all my boots for re-enacting and I can tell you being in high top boots you will be dry with it applied.
Have you ever heard of Kamsnaps? They make a rivet press that has saved my arms so many times lol Also, Sailrite Fabricator makes an amazing machine that can sew just about everything I throw at her and it seems like it would be easier to get a straight line stitching with it verses a cylinder arm like the leather machine you have. I think there's actually a guide you can get now to help with that. Just a thought, another great video!
Another thought, if you were to take that "tongue" panel and changed the color to a silver or steel grey you would have an encorpated greave to your boot giving you some level of armour there. Just a though
Really cool project! I'd definately look into cutting of the corners even if you're gonna make them permanent, just to make the whole thing look even more as one cohesive piece. Might be harder to connect the parts but I'm not sure it would be. Another thing you could do to make it look more cohesive is to stitch the edges of the leg that are not actually sown to anything, just to give the illusion of them being sown to the boot. Anyways, great job and welcome to larping! :D
Another way you can go around this is to use puttees. They were in use from pre-viking age to ww2 and they are super simple to make a bit harder to tye but nothing hard at all and you don't have to work with lather :D I would recomend making them mainly out of wool tho.
What type of boots are those? I'm thinking of doing something similar and would like to find the same sort of style of boots for my project. Thanks so much for any help in advance!
I don't know if you have permanently attached the flaps yet, but before you do, I would get the boots resoled. It would be a lot easier (and likely cheaper) doing it as ankle boots than say knee high boots). Resoled those boots should last quite a long time.
You folded the back over at an angle on the leather to make it take the shape of the back contour of your leg. I'd like to have a more in depth explanation/demonstration of that. I am currently making something very similar from a deer hide for my dad.
Bro, I love the boot you have an awesome channel, what where the tools and supplies you used for this build? I would like to give them a shot, thanks for the amazing content
If you want another great LARP to go check out Moonrise Larp by Otherworld Theater. I go to their Chronicles of the Realm LARP and I absolutely love it. But they have other larps that they host. I also love the fact you are doing larp based videos with mostly budget friendly materials! As someone who has been going to larps for a few years now, this is absolutely fantastic! Keep up the good work, and keep leveling those skills up! Who knows, maybe someday you will level up that new LARP skill of yours.
Whatever footwear you choose, be sure they're comfortable. Blisters and sore feet will take you out faster than an arrow to the knee! I bought some decent boots from amazon for like 75 bucks. They were really nice looking and fir fairly well but the sole was some form of hard plastic so they werent the most comfortable walking all day at renfest.
These are just gaiters over already semi period looking boots... Plus leather is expensive and not fun to work with without the proper tools. I used to 'drill' holes with a hammer and nail because you aren't going to push a needle through by hand more than a few times. Also test your dye on scraps if you're trying to match and to see if you want to water it down or up the intensity. With leather one mistake can stick with you throughout the whole project unless you're willing to redo the whole panel. I also recommend pricing everything out before purchasing anything, building an outfit from nothing is extremely rewarding but can easily cost more than 'off the shelf' if you're not careful. Two more bits of advice, there's probably a template for any piece of armor or kit you want to make you can copy from online. And when making clothing pieces give yourself a little extra room so its not squeezing in on you. Your muscles flex, your chest expands, and so on.
If you do decide to hand sew leather, you need to use polyester thread run through beeswax to prevent the tannins from eating through the thread. Fantastic work!
This turned out awesome! I think you should definitely make it permanent. And if worse comes to worse, you can drill out the rivets and put them on a new pair of the same boots since everything already made to fit that kind of boot.
I say yes, leave them as is. The whole point in learning to make stuff and using old objects is to create something new from them and bringing new life into older objects. There’s nothing more beautiful and creating one thing from another thing. That’s what a skill monkey does. Also I think wearing those boots out in everyday will help bring a trend for wearing “common day cosplay”
Permanently joining the boots is a good idea - but I think you'd be best off still rounding off that bottom corner somehow. Currently it's a very harsh vertical line that looks a little unnatural there.
Agreed, round off THEN permanently attach
Even just beveling it would probably make a big difference if it’s going to be adhered anyway, but agreed, it’s a very blunt line without doing something
I agree with rounding it off then permanently attaching it.
On a side note: It's so sad that knee high boots for guys are not in mainstream fashion (anymore) and veeeeeeryyy hard to find. First, because it looks damn foine on guys. Second, because I hate buying women's boots (they never have my size and/or look girly. I wanna look badass).
Thank the Lord they aren't in the mainstream. Thank the Lord they are left pure and un-bastardised.
@@gandalftehdank6052, you have a very good point and to it I agree. I think it’s far better to have the skill to make the boots or up cycle, like what we see here.
@@williamjames5321 It is. Indeed there are few fields in life that do not thrive once you master its ways and stop relying on others to do so for you. Self-sufficiency is perhaps the closest thing to freedom on this Earth.
I’m a woman (with extra-small feet) and I have been struggling to find good mid-calf to knee-high historical-looking boots for LARPing as well 😢
Also, women’s boots are almost universally lower-quality and fall apart way faster than men’s boots from my research.
You can get men knee high riding boots. For horse riding obviously.
Thank you so much for the shout out - my son has been hopping around the room since I showed them, you totally made our day ❤️
I was so moved by your email and I wanted to make sure I responded in the best way I could. I hope your sun enjoyed it and knows that he is awesome. You are awesome as well for all you do for him and the encouragement you give. Thank you both for watching😁
The extra strap length could allow you to add a removable sheath for an external boot dagger or seven.
Never can have too many daggers after all.
Dagger Dagger Dagger
There is one scene in DreamWorks "Sinbad" (the animated one) and one of the pirates gets stopped from entering the party and is told he has to leave his weapons at the door.
He then procceds to spend _the entire time_ they are at the party unloading his weapons array, finally taking they last one off just as Sinbad decides to leave.
@@DH-xw6jpoh that scene is a comedy gold. Similar scene was in pirates of the Caribbean at world's end, when they arrived to Singapore and Elizabeth was pulling out various guns from her pockets and Barbosa was looking at it confused
That is a GENIUS solution to a very common problem! Good boots are definitely pricey, and 'costume' boots aren't worth it for lack of ruggedness.
For those wanting to get into LARP but don't (yet) have the skill or confidence to pull this off - most LARPs have some great amateur leatherworkers that would likely do this work for you at a fraction of the cost of new boots if you hit them up with the link to this video! Sharing is caring! =D
I'm looking forward to seeing what your full kit looks like. The biggest thing I'm appreciative of your videos is that you speak of prices and ways to budget. As someone trying to get into and understand this hobby. Not sinking too much into it when getting started is a lot more welcoming than staring at the paywall of some very expensive items online.
hehe Kit
Some practical advice that I offer to you is that when I started, I looked for leather in places that normally ppl wouldn't typically look. Garage sales, Goodwill/Salvation Army/Thrift stores, etc. I would almost always buy whatever leather garments (old jackets, mini-skirts, leather pants, leather sofas, etc) and reclaim the leather from those goods. Granted garment leather is very thin but the good thing about that leather is that you could use it as trim or leather bias tape. For leather type armor....old saddles and tack. It's thick enough (anywhere from 9oz to 12oz) depending on which type of saddle you get secondhand. English and American saddles are completely different. But a brand new double shoulder currently is about 90$ for 8-9 oz. more if you want thicker. I bought 2 broken american saddles that were busted up for about 50$ a few years ago. Cut the stitching and harvest what you can. The best part of buying old busted up saddles....they are all ready 'battle scarred'...i.e. holes, no fuss to antique it, scratches, weathering, etc.
Auctions and estate sales are another way to find used leather. Again, look for anything with leather. Most of the tack used for horses have buckles and such already built into the reins, halters, bridles, headstalls, whatever.
Same goes for leather notions. O and D rings, brass/nickel clips and snaps, you can usually find fairly cheap at home improvement centers instead of buying from a leather goods store. And at the garage sales and thrift stores, for those notions on sandals with buckles, old purses/bags, whatever you can find that has metal hardware. I used hardware (4 buckles...2 from each shoe) once from an old pair of sandals to use on a pair of bracers I made. I paid 50 cents for the shoes.
If you've a Hobby Lobby near, check their weekly flyer (either in-store or online). Every once in awhile they will run a Leather something discount (if I am correct, somewhere between 10 to 15 percent). While they do not have the most extensive collection of leather, they do have basic tools, waxed thread/sinew and notions. My favorite leather to buy from them are the scrap leather bags. Usually have enough decent pieces for smaller projects.
Hit up some upholsteries as well. See if they don't have a scrap bin that you can burrow through. (this idea just hit me)
Anywho, happy hunting and good luck.
This Larp-gear series is the most helpful thing for beginners. You cover all the things you struggle with to get your hands on: Shoes, rain proof clothing and even the freaking tent! It's great!
To answer your question: These are your Larp-boots now. If they gonna fall apart soon anyway, don't use them up not larping.
This is such a good idea! Shoes are always the hardest part of a kit because unless you're looking to spend serious cash, it's going to be very hard to find something comfortable that fits the vibe. Definitely going to use this idea.
I want to use this and try to make Jedi boots for a costume! A lot of your larp videos have given me ideas for my jedi costume build. Thanks, Kit!
Want to do these for my Jedi robes, too.
Came up with basically the same design myself a while ago, with some minor differences like a strap that goes around the sole in front of the heel and a piece of leather that covers the instep and lacing.
Seeing this vid gives me confidence to actually start building them (as soon as I'm finished with my woolen coat ;) ).
These look so good, I'll have to try this at some point. I'm a wide footed, huge calf girl so shoes are not my friend and I've been looking into customizing some and this definitely helps
The extra piece onto the lacing section was super slick, and I think, integral for making it look seamless. Very well done!
This man is beautiful and a treasure to the TH-cam larp genre! Wonderful energy and his excitement for larp and crafting is contagious. A fav new subscribe for sure.
Your channel really humanizes some of the more intricate sides of leatherworking. Making professional level pieces doesn't have to be overly difficult. Thank you for doing what you do.
Additionally, there are some really awesome cobblers out there making videos who I have gotten some really solid tips from for any footwear leather projects I will do in the future.
Fantastic idea for some great looking boots! We do like the idea of making these boots, legit larp boots, and attaching them permanently, but if we may suggest, cut the corner on the boot you mentioned, match it to the already made seam on the Tims, then rivet or sew into place. We feel that by following the seam line, it will take these boots to a whole other level of coolness, as you would be continuing to use the Tims design to your advantage and adding in your own flavor, and it would all blend that much more.
Either way, Thank you for the video and the great idea! Excelsior!
This channel really deserves more subscribers I love the channel you've gone over so many projects and even items I spent years looking for diy projects for and couldn't find
Love the positive message at the end! I like that you are honest about what you don't know and what you learn on the way! I'm new to leather myself, and I love watching your vids! ❤
First congrats to your first LARP!!! Second: good idea! I have made my first boots for a dwarf char with two rainboots that I covered with fake leather and a fake fur trim at the top. With some painted foam I made a steel toecap and glued it all on with hot glue and some industrial glue. Held well especially in muddy weather and it forced me to alter my gate which helped get better into character.
I will try your idea for some casual boots soon, as I have found some old leather in the attik.
I have been binging you for about a month now. And it is interesting to watch your charisma level up every episode….
Someday, it’d be cool to make shoes from scratch. You could have a woodworking episode about making a last, and then a leather working episode about making the liner, upper, welt, and sewing the sole. It’s not a very budget project, admittedly, but it’s a heck of an exp-booster.
You could potentially skive the edges of the leather panels to make it have kinda a smoother transition from one to the other, which actually brought me to another thought.
I first learned about skiving (which is like cutting the flesh side of the leather's edge in this kind of scalloped motion to create a gradient and make a leather seam smoother) with a video about making oxford shoes, which often have broguing.
You've got some nice long seams on these boots that you could add broguing to for some really nice detail
I found this channel the other day and I've watched a bunch of your videos. I'm loving this channel.
GREAT JOB SIR !
I have a pair of old combat boots I use. I have a set of leather covers as well that wrap over them to give them a better feeling. Something I have seen in the past is people using EVA foam or even piping insulation to make "armor" to cover more modern boots to give it an armored feeling and hide all the modern sides. Someone once made a bit of EVA armor look like wood/bark to cover their shins and hide the modern boot. This is a wonderful option! Thank you for all help in this for my own larp
I recently came across your channel, and I was instantly HOOKED! While I'm not into the LARP scene, I do find your channel content and presentation VERY enjoyable. Your enthusiasm and mannerisms are very entertaining, and I've picked up a few pointers and techniques that I certainly see myself using in my leather working/woodworking/metalworking! Thanks for your time and energy spent making these videos!
dude it's been so long since I so enthusiastically subscribed to an account, absolutely love what you do and the passion you do it with. you've given me SO many cool ideas to work on
This channel has quickly become such a source of comfort,iv watched most videos at least 3 times right now as I draw and its inspired me to start leathercrafting. So thanks to the skillshare dream team,love you guys!
This really raised my spirits on a sucky day. It won’t be anytime soon, but now I’m even more excited to work on getting my whole LARP costume together, especially with this genius solution to the same issue you experienced
I've been binging this whole channel for the past few weeks and it blows my mind that you don't have way more views and subscribers. High quality videos, high quality content, and high quality craftsmanship. This is my new favorite channel 😁
And that's why this is one of my favorite youtube channels💪💪💪
It's rare to see someone with your enthusiasm these days, it's a delight to watch👌
Finish fixing them together. It's a great look and the leather will wear forever. Great instruction.
New here. I've been binge watching your vids. Love the geekcraft. Just watched your buckler vid and a bunch of your LARP gear vids. A skill I'd love to see covered is a LARP safe Spiked Pavise shield? Its a larger strapped shield that also has an offensive spike, but in a different place. It would be awesome for LARP as its both defensive and offensive.
Absolutely you should sew that part down and make it part of the boot. As a long time leather worker, I can tell you that is likely to curl up if you don’t. You did a great job on the design. Well done!🐝❤️🤗
The look veg tanned leather takes on if you don't stain it, and just wear/use it from when it was pink is incomparably beautiful, completely unobtainable with stains or paints. I get you don't have the luxury of not matching with this project, but for others, starting with that pink new leather look and letting it age in use it looks sooooooo nice
I found your channel yesterday and love the enthusiasm that you radiate as you make your projects, I'm currently in the midst of binging all you videos.
The projects are neat and very fun to see and perhaps one day make myself, but the thing that makes me love the videos is your personality.
Keep going strong, you've got a new sub in me! :D
Great work on the boots... I have subscribed as I want to see what else you get up to.
Welcome to the Family! Glad to have you😁
You should come out to LARP Adventures in August. Four day campout in central PA with a great team and one heck of a party.
Those boots look like the type you can get resoled over and over again. Trenton & Heath is a good channel to see how cobblers resole shoes
Okay
1. Amazing job!
2. Totally gonna use your video to make mine for renn faire
3. You should definitely make them into permanent boots
4. In case I didn't mention it, Amazing Job!!!
I am always looking for ways to make my outfit "pop." I like this idea, and it inspires me to try it out. Thanks.
That is an awesome projects. I don't larp, but we have outfits for medieval fairs, and it is so hard to find good matching footwear. I might have to make these. Thanks for sharing!
I love how the front flap makes it look like leather grieves. And i saw someone say something about putting a dagger sheathe in the boots and thatd be cool, you could also put a whetstone and fire striker pouches
You need to make a leather costrel (water bottle) for LARP events. Townsend has a great video on it. Your leatherwork skills would be overpowered for that project but a great project to share. And you can learn/teach about waterproofing leather with either brewers pitch or beeswax. I got beeswax from our local farmers market for almost half the price of Amazon.
Oh... my friend... are you gonna LOVE one of the upcoming episodes 😉. Thanks for being part of the Fam. I appreciate you!
@@SkillTree my son and I are making them currently. Cool project so far.
super cool! reminds me a bit of oldschool equestrian gaiters. It also occurs to me that a lot of fantasy characters get around on horseback so this totally makes sense thematically :)
Absolutely amazing content, I feel like you deserve way more success for this stuff, keep leveling up those skills man.
Id stitch them to the boots, but use a hand awl for that process. That way you can reuse them on another pair of boots later and follow your original stitch holes. With those uppers being vegetable tanned, you could get them hand tooled (unless you can do it yourself) and put some type of crest or personalization on them. Since typical garments were lifetime garments back then, those could be your lifetime boot uppers that you make decades of memories with...and maybe even mark and personalize them as your experiences grow.
Another thing to use instead of light foam which acts like leather for pattern making is covering a paper pattern with a layer of duct tape. Really useful if you want to play around with the layout as it lets you cut, test and then reattach until you like the fit.
Don't know if it was suggested already, but I would like to see you make a treasure chest. The classic kind we all remember with the rounded lid and metal banding.
I have such a hard time finding riding boots because of my thick calves and while I don't currently own any ankle boots i could do this with, it will make shopping at thrift stores so much easier now I know what i need to look for. thank you so much for this! i'm excited to get started!
This is exactly the tutorial I’ve been looking for!! I have a bunch of scrap leather I’ve wanted to work with for ages but I’ve been unsure how exactly to go about patterning a boot cover or modifying a boot in a way that looks convincing.
Working on my DnD character cosplay and every single one of your videos have been so helpful. Thank you for these!
I needed this! Great tutorial! I have a bunch of leather that actually matches the boots I wear everyday, so bonus.
Great idea! Will be trying this. Thank you!
I have enjoyed your videos so much and have gotten so many ideas from them. I'm currently stitching the seat part of my own staff of the wanderer. I don't have money for leather, but I have some scraps. For the seat I got some brown duck canvas. I cut it about how your staff seat is and I'm currently stitching some leather corners onto it.
Watching you get excited about LARP has been really nice and fun. I love these videos
I love this! This is what I needed to figure out to make some of my shoes into knee high or thigh high boots for my version of a Witcher for me!
With the extra length those straps have, you can add removable metal bits to the boots as shin guards
How had TH-cam taken this long to suggest your content to me? It's right in my wheelhouse. At least now I have the back catalogue to catch up on.
I also dislike those little bits at the bottom. I would probably go with a combo of the 2 options you mentioned. Follow the curve of the original boots stitching and then make it permanent. Especially if they're racing reaching the end of their life you can give them new purpose. And honestly, they look cool enough that I can see them working with some irl outfits.
I really dig the look you got on this project. Your pattern development method is cool, gotta try that.
Bro-Meigo!!! Those came out absolutely AMAZING!!!
Very KOOL!! Enjoyed vid!! Gotta pair of Rocky -- Moc- toed pull on boots.. this add on will look awesome!! Not to mention, snakecproof!! Thanks
I appreciate the encouragement
If you want a semi permanent fix for that little flap of leather towards the bottom of the boot you could rivet on some button snaps to fasten the flap to the boot
I'd suggest thinking about removing the bottom part altogether not only to get rid of the flaps but also to free your heel.
Now it looks like it's being stiffened and held in place by the spine of the shaft and prevents your foot from i.e. fully stretching out, like standing on your toes or laying your foot flat on the ground when kneeling or tilting to the sides. Also you may want to think about the comfort when wearing spurs or other attachments now and after.
By cutting along and under the line your ankle forms in the shoe (like greek/spartan greaves do) the flaps would not protect the lower part of the shoe/foot anymore and also one might argue that you'd end up not having "complete", one-piece boots anymore, true, but in change you would get very stable, fancy and fixed-to-your-shoe gaiters that, imho, while still giving a fair impression of a one-piece boot offer a much wider range of movement and especially much more additional creative use!
And we all know how much we like that ;)
Medieval collectibles has some pretty good options, both for costume bits and up to the expensive stuff
Definitely will be working on these for my crimson ranger cosplay, thanks clever!
These have given me the idea to make some boots for myself. I’m starting to get into leather work for knife making and this would be cool for when I go to a Ren Faire
Permanent boots sound epic. Go for it!
I'd say cut those "flaps" and glue everything together, make them permanent! Great boots!
But put a couple stitches or rivets in there for sure, I don't trust glue for nothin'!
Not since The Incident...
As someone who has larped for 20+ years, the only thing I would suggest you do (because these look great), is not an aesthetic change, but more of a quality of life change.
I noticed that the tread is almost gone on the boots you used, and when you larp, you Will run into mud or wet grass at some point. Those soles you have on them will slip right out from under you in the middle of a fight at the worst time (usually when a BBEG is about to lay waste to your group). Have a Vibram boot sole put on and get rid of the ones you have now; the back side of your pants will appreciate it.
Perfect timing! I was planning to do exactly that with pair of shoes I found at the thrift store!
You should use snowseal to water proof your foot wear, I use it on all my boots for re-enacting and I can tell you being in high top boots you will be dry with it applied.
Have you ever heard of Kamsnaps? They make a rivet press that has saved my arms so many times lol Also, Sailrite Fabricator makes an amazing machine that can sew just about everything I throw at her and it seems like it would be easier to get a straight line stitching with it verses a cylinder arm like the leather machine you have. I think there's actually a guide you can get now to help with that. Just a thought, another great video!
Oh they came out fantastic!!!!
That an awesome job.
I thought I was the only crazy person that likes to do everything. Nice to know there are others! lol
Another thought, if you were to take that "tongue" panel and changed the color to a silver or steel grey you would have an encorpated greave to your boot giving you some level of armour there. Just a though
I might try something like this to make my leaf fae boots!
that was amazing. definitely make it permanent.
Really cool project! I'd definately look into cutting of the corners even if you're gonna make them permanent, just to make the whole thing look even more as one cohesive piece. Might be harder to connect the parts but I'm not sure it would be. Another thing you could do to make it look more cohesive is to stitch the edges of the leg that are not actually sown to anything, just to give the illusion of them being sown to the boot. Anyways, great job and welcome to larping! :D
Another way you can go around this is to use puttees. They were in use from pre-viking age to ww2 and they are super simple to make a bit harder to tye but nothing hard at all and you don't have to work with lather :D I would recomend making them mainly out of wool tho.
What type of boots are those? I'm thinking of doing something similar and would like to find the same sort of style of boots for my project. Thanks so much for any help in advance!
How about a stirrup strap that goes underneath the boot and just in front of the heel to connect both flaps?
Waxed canvas spats to match the waxed canvas cloak is a sweet look.
I don't know if you have permanently attached the flaps yet, but before you do, I would get the boots resoled. It would be a lot easier (and likely cheaper) doing it as ankle boots than say knee high boots). Resoled those boots should last quite a long time.
So cool!!! Totally glue the flaps bro!
Thanks! I think I will! They will just be big ol boots now
You folded the back over at an angle on the leather to make it take the shape of the back contour of your leg. I'd like to have a more in depth explanation/demonstration of that. I am currently making something very similar from a deer hide for my dad.
Bro, I love the boot you have an awesome channel, what where the tools and supplies you used for this build? I would like to give them a shot, thanks for the amazing content
If you want another great LARP to go check out Moonrise Larp by Otherworld Theater. I go to their Chronicles of the Realm LARP and I absolutely love it. But they have other larps that they host.
I also love the fact you are doing larp based videos with mostly budget friendly materials! As someone who has been going to larps for a few years now, this is absolutely fantastic! Keep up the good work, and keep leveling those skills up! Who knows, maybe someday you will level up that new LARP skill of yours.
Whatever footwear you choose, be sure they're comfortable. Blisters and sore feet will take you out faster than an arrow to the knee!
I bought some decent boots from amazon for like 75 bucks. They were really nice looking and fir fairly well but the sole was some form of hard plastic so they werent the most comfortable walking all day at renfest.
These are just gaiters over already semi period looking boots... Plus leather is expensive and not fun to work with without the proper tools. I used to 'drill' holes with a hammer and nail because you aren't going to push a needle through by hand more than a few times. Also test your dye on scraps if you're trying to match and to see if you want to water it down or up the intensity. With leather one mistake can stick with you throughout the whole project unless you're willing to redo the whole panel. I also recommend pricing everything out before purchasing anything, building an outfit from nothing is extremely rewarding but can easily cost more than 'off the shelf' if you're not careful.
Two more bits of advice, there's probably a template for any piece of armor or kit you want to make you can copy from online. And when making clothing pieces give yourself a little extra room so its not squeezing in on you. Your muscles flex, your chest expands, and so on.
If you do decide to hand sew leather, you need to use polyester thread run through beeswax to prevent the tannins from eating through the thread.
Fantastic work!
This turned out awesome! I think you should definitely make it permanent. And if worse comes to worse, you can drill out the rivets and put them on a new pair of the same boots since everything already made to fit that kind of boot.
Honestly I just made a couple turnshoes with weirdly high tops, they haven't failed me yet.
easier to cover the laces and uppers atogether which would also make it look more period and cohesive
Good thinking on the re-release
Great video thanks for the great ideas!
That is amazing!!!! I really love these boots!!!
I say yes, leave them as is. The whole point in learning to make stuff and using old objects is to create something new from them and bringing new life into older objects. There’s nothing more beautiful and creating one thing from another thing. That’s what a skill monkey does. Also I think wearing those boots out in everyday will help bring a trend for wearing “common day cosplay”
What is the sewing machine you're using?
Nice hopefully I’ll have at lease a few pieces to wear for a larp or here
You could put a strap under the boot to hold down the tabs. Great videos