I filed the edges with a flat file that is used in the world of modeling, it does not touch the metal of the facade. This Crossfader is revolutionary on this mixer.
I had the same problem. At first I superglued plastic to the mounting bracket but that didn’t last long. Just did this and it is awesome! Thanks for the tip!
Bro exact same situation. Got this mixer and lost my crabs like completely! I was like what happened to this being an innofader?! I nervously ordered the same fader(pnp2) but now I know for sure it will work and I know to use 2 bumpers and don't recalibrate. Thanks a lot man I appreciate it
@@voiceoverz4975 I'm not sure what you mean by that sticker. What's important is that you have the included adapter that lets you change to the four PIN connector. There should be several included adapters. Only one will work with the numark Scratch and it has a four PIN connector. Cheers!
I just have install an Innofader PNP 2. First, had an issue with the original bezel. The PNP 2 didn't fit as waiting and had to make some fixes to make it fit. Second, the reverse switch doesn't work fine. The function is inverted. Any advice for the last issue?
Cheers for the vid bro. I plan on getting this mixer but will what to see how I feel about the fader. Did you consider filing back the faceplate to accommodate the fader? That would have been the first thing I would have thought of but I tend to go the more destructive route when I'm faced with a problem :)
I've just bought one if these mixers brand new, going to ask about the original fader in yours and why you made the upgrade as mine has about 3mm dead space before music comes in the takes about 1mm on dragging the fader back before the music cuts off ,basically rendering it useless for anything other than cutting, is this a fader problem or a mixer problem
Yes, I went ahead and calibrated it before adding the bumpers. Not sure why it would act weird after adding the bumpers, and then re-calibrating. I actually had to reopen it, and calibrate it without the bumpers. The pins are very brittle, so be careful bending them multiple times.
@@evanjohnmo Hi man, i'm french really sorry to bother u possible to talk ? I bought a innofader pro 2 for my numark scratch for me is obligatory that can be work with it. But i don't know what to do i'm really really Lost with that if u have Time to explain just how u put your pnp for me if u Can put a pnp that also possible to put a pro 2 but when i open the table i see nothing for that work
@@sleeping85404 oui j ai reussi y arien de compliquer en fait il faut ouvrir la cage en alu qui protege le cross en ecartant toutes les pattes pour le liberer, ensuite tu as accès aux barres ou tu dois inserer les petits ronds en caoutchouc il y a une petite piece en plastique qui va se decrocher quand tu vas deboites une barre ne la perd pas puis tu fais ce que t as a faire et tu remontes le tout c est vraiment pas compliqué faut prendre son temps surtout bon courage
@@Je-vb1op Nop ! J'apprends au fur et à mesure. J'utilise pas de vinyle serato j'suis au vinyle pure je fais mes moves à l'improviste sur instru mais je capte bien que mes moves sont redondant "ouverture du cross début de voix" cut et repart je sais pu le nom technique bref assez simpliste la je dois apprendre à calé des songs au même bpm concernant les techniques je prend sur Rob Swift c'est en anglais comme d'hab mais c'est vraiment bien expliquer les tuto scratch en fr sont à chier
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
I filed the edges with a flat file that is used in the world of modeling, it does not touch the metal of the facade. This Crossfader is revolutionary on this mixer.
I had the same problem. At first I superglued plastic to the mounting bracket but that didn’t last long. Just did this and it is awesome! Thanks for the tip!
Bro exact same situation. Got this mixer and lost my crabs like completely! I was like what happened to this being an innofader?! I nervously ordered the same fader(pnp2) but now I know for sure it will work and I know to use 2 bumpers and don't recalibrate. Thanks a lot man I appreciate it
Hey Evan. will the PNP2 with the orange sticker on the box work?
@@voiceoverz4975 I'm not sure what you mean by that sticker. What's important is that you have the included adapter that lets you change to the four PIN connector. There should be several included adapters. Only one will work with the numark Scratch and it has a four PIN connector. Cheers!
Mine do not work 😢
Hi Evan nice mod! Where did you find those spacers?
I am watching your video
An was going 2 attempt to install n do the exact same thing intel I seen your video
I’m trying to install my PNP2 now. This video no working for me.
How did you get out the black rails?? That's pretty much the most integral part of the procedure.
I just have install an Innofader PNP 2. First, had an issue with the original bezel. The PNP 2 didn't fit as waiting and had to make some fixes to make it fit. Second, the reverse switch doesn't work fine. The function is inverted. Any advice for the last issue?
So nice. Thank you 🙏
Cheers for the vid bro. I plan on getting this mixer but will what to see how I feel about the fader. Did you consider filing back the faceplate to accommodate the fader? That would have been the first thing I would have thought of but I tend to go the more destructive route when I'm faced with a problem :)
That was actually my first thought too. Glad there is an intended solution that's non destructive
I've just bought one if these mixers brand new, going to ask about the original fader in yours and why you made the upgrade as mine has about 3mm dead space before music comes in the takes about 1mm on dragging the fader back before the music cuts off ,basically rendering it useless for anything other than cutting, is this a fader problem or a mixer problem
Please help, how do I remove the fader from the mixer? Do I have to open whole mixer?
What drop in style fader would you use? My fader is starting to bled and I need to replace it.
hay thanks for the tip but do you know were to get more of these o rings if so do you have a link to them
Thank you, peace....
Is the Crossfader sends MIDI? Thanks
Hay with the calibration do you need to take out the extra 0 ring or can you just calibrate it with it in for thr innofader pro 2
Did it work out with the pro 2? They say you need another bracet to mount it?
thank you
Do u calibrate before u add the bumpers in fader?
Yes, I went ahead and calibrated it before adding the bumpers. Not sure why it would act weird after adding the bumpers, and then re-calibrating. I actually had to reopen it, and calibrate it without the bumpers. The pins are very brittle, so be careful bending them multiple times.
@@evanjohnmoI did try it but it didn't work for me 😭😭 s.o.l
I went a head just out all back together and left it alone
@@evanjohnmo Hi man, i'm french really sorry to bother u possible to talk ? I bought a innofader pro 2 for my numark scratch for me is obligatory that can be work with it. But i don't know what to do i'm really really Lost with that if u have Time to explain just how u put your pnp for me if u Can put a pnp that also possible to put a pro 2 but when i open the table i see nothing for that work
What about the pro2? Is it better or should I buy the same for my numark scratch.. thx
Can someone help me please?thx
@@zourand4487 i bought one but idk how to put on the numark scratch
thanks💯❤👍👍
j aurai oulu voir le demontage et remontage dommage
Tu as réussi ?
@@sleeping85404 oui j ai reussi y arien de compliquer en fait il faut ouvrir la cage en alu qui protege le cross en ecartant toutes les pattes pour le liberer, ensuite tu as accès aux barres ou tu dois inserer les petits ronds en caoutchouc il y a une petite piece en plastique qui va se decrocher quand tu vas deboites une barre ne la perd pas puis tu fais ce que t as a faire et tu remontes le tout c est vraiment pas compliqué faut prendre son temps surtout bon courage
@@Je-vb1op yep merci c'est bon je l'ai monté j'avais pas vue le bon cable comme un boloss mdr à de bonne session de scratch !
@@sleeping85404 t as des videos un peu de ce que tu fais?
@@Je-vb1op Nop ! J'apprends au fur et à mesure. J'utilise pas de vinyle serato j'suis au vinyle pure je fais mes moves à l'improviste sur instru mais je capte bien que mes moves sont redondant "ouverture du cross début de voix" cut et repart je sais pu le nom technique bref assez simpliste la je dois apprendre à calé des songs au même bpm concernant les techniques je prend sur Rob Swift c'est en anglais comme d'hab mais c'est vraiment bien expliquer les tuto scratch en fr sont à chier