I'm new to off roading. Why is it impossible to find where a safe jack/lift point is? Neither the user or service manuals mention anything about how to get the Teryx into the air.
I installed the lift kit on my 2020. I did not use the steering stop washers whatever you calling I didn't notice any difference they don't hit the shots they don't rub what's the purpose of the big washers to go around the tie rods can anybody help thanks
@Bud Car Yes with our 1.5" a-arms you are able to run 30" tires with or without the lift kit. Here is a link to the a-arms we offer for the Teryx: www.superatv.com/shop/kawasaki/teryx4#/filter:product_category:A$2520Arms
I already have your 1.5" arched a-arms. Do I need to fit the 'steering stop' aswell as the 1 I installed for the a-arms? Will I also need the wheel spacers on the rear with the arched a-arms?
We really need video for arched a arms plus lift.oh yes torque specs would be helpful. Also grease points and what type. Thanks
Thx for NOT showing us how it looks when you are finished. Wow.
The provided cap with my kit was threaded. Also the provided brake line rests against the new bracket. Should I be worried?
I'm new to off roading. Why is it impossible to find where a safe jack/lift point is?
Neither the user or service manuals mention anything about how to get the Teryx into the air.
It depends on what you need to work on, but as a general rule, most places directly on the frame will work.
I installed the lift kit on my 2020. I did not use the steering stop washers whatever you calling I didn't notice any difference they don't hit the shots they don't rub what's the purpose of the big washers to go around the tie rods can anybody help thanks
What jack stand did you use?
I installed the 2in lift but I didn't use the big round washers where the tie rods are is that something I need to do what's the purpose?
@Bud Car Yes with our 1.5" a-arms you are able to run 30" tires with or without the lift kit. Here is a link to the a-arms we offer for the Teryx: www.superatv.com/shop/kawasaki/teryx4#/filter:product_category:A$2520Arms
I don't see why you'd have to run the spacers in the rear? Nothing has changed out on the hub end of things 🤷♂️
I already have your 1.5" arched a-arms. Do I need to fit the 'steering stop' aswell as the 1 I installed for the a-arms? Will I also need the wheel spacers on the rear with the arched a-arms?
How big of tires can you run with that?
You can run up to a 28" tire with this lift kit installed.
Can you fit 30 inch tires if you have SuperATV A Arms??
Damm I was hoping for 30s. I’m running 28s stock
SuperATV Is that with wheel spacers with 26’ tires
@@cameronfloyd7145 are 2 once spacers ok using stock tires with this kit?