Technics SL-QL1 Turntable Repair: Capacitor Replacement

Recapping the main board on this vintage linear tracking turntable. Includes disassembly and reassembly.
Sorry for all the "umm's" and "uhh's" in this video. It's very difficult to narrate while paying attention to the actual work!
Capacitor kit:
shorturl.at/6kiGm
The cap list - as was installed by the factory:
5 x 1uf 50V
1 x 4.7uf 25V
5 x 33uf 16V
1 x 3.3uf 50V
4 x 47uf 16V
1 x 100uf 6.3V
2 x 100uf 16V
3 x 470uf 6.3V
1 x 330uf 16V
1 x 220uf 6.3V (axial)
1 x 100uf 35V (the original was radial but replaced with axial)
Most were replaced with higher voltage values. All of the replacement electrolytics used in the video are Nichicon.

[@ZookLife]

Hey! Thanks for the video.
I had my feet wrong from when I disassembled my to change the cable. Minr was giving some noise because of the old rca cable.
Would have been nice if you had listed all the caps. Would had been easier to order in advance, without opening, from digikey or mouser.

[@screen-o-matic]

Thanks for watching and good call on the list! I have added the original values to the description.

[@ZookLife]

@screen-o-matic 💚

[@williamdonnelly184]

Hi there dont suppose you have a photo of the finished board, it would help if you did as im just about to carry out the same upgrade