Mini Weather Station using an Arduino
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2021
- #arduino #weather
Mini weather station is portable and helps you to find the humidity and temperature of the given place in a matter of 5 seconds.
This project is a combination of interfacing 2 Modules :
1) DHT 11 Module: • How to connect Humidit...
2) LCD 16x2 (with I2C) : • LCD 16x2 interfaced wi...
The Libraries needed for the project : bit.ly/2Pi106j
1) DHT Library
2) LiquidCrystal_I2C Library
3) Wire Library
Read the Article here :
electronicssimplified.tech/min...
Background Music Credit :
- Lichu - Rainbow
- • Lichu - Rainbow
Great video! Very simple and well explained! Thank you :^)
Where we can find the code
MAGIC!
It actually shows 0.00 of humidity and temperature, the screen brightness would lower and it seems like the sensor heats up so much that it started to melt the plastic shell (when it was plugged in, idk why because it's the same sensor)
Edit: I found out that it was the wrong pinout (it seemed pretty obvious because it was heating up), the PCB didn't indicate what were the pins so I had to look for the pinout on the website that sells them and after connecting the right cables it worked
Check connections... Something is loose somewhere
Looks like you have done a mistake with the power connections... Please check if you are using the right sensor... If it is a different Humidity Module, then you might have to check power specifications.
@@ElectronicsSimplified7 Yea it was different but as I said in the comment (edit) I found out that it had a totally diferent pinout
but my lcd is not on and not showing any text
@ElectronicsSimplified7 how to set up in a box can you please help doing the same project
Well explained sir😊
♥️
Very cool, thank you! Does it show the temp in Celsius or Fahrenheit?
You can do the changes in the code if you want any other SI unit
For the current project its °C
Could you please share the article for this project
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
here you go Ajay. Cheers!
@@ElectronicsSimplified7 Thank you so much sir
keep on going!
Yes.
New Video coming soon
@@ElectronicsSimplified7 cant wait!!
Sorry, but where is the code. Thanks
do you have research paper of it .
I have on other articles. But this is just a part of my hobby.
Could you please share the circuit diagram to clearly know about the connections
drive.google.com/file/d/1NNU1yc-Pb-TZh4PHgEzcD3Rqf0XBLLfN/view?usp=drivesdk
BRO AT THE END. MY. DISPLAY IS. SHOWING 0 0 ON BOTH LINES CAN YOU TELL ME WHATS AN ISSUE
Reduce the contrast of your display by turning the potentiometer at the back of your I2C
bruh same
Can you send the code sir
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
bro I mean when I upload the code. then led is showing humidity : 0 and temperature:0
there are no real number coming.
2 cases:
1. Your DHT sensor is not connected properly (check for lose connections)
2. Your DHT sensor is gone bad.
@@ElectronicsSimplified7 ok bro got you thanks for the help
it just shows 0.00 on humidity and temp?
Please check your connections if they are correct and check that the wires are not losely connected.
@@ElectronicsSimplified7 they are all well connected.
Where is code?!?!
Code is the description
kyu re kayki alas
Sir getting error sir
What's the error?
coding