Just in time for the holidays! If you would like to gift someone a membership to my Patreon group you can do so by clicking here: patreon.com/mentalmetaldetecting/gift
Hello Mental Metal. You’re the first I’ve seen do it in the order I’ve been programming my Legend. It’s a little of a learning curve, when you first start, but like every thing computerized, you have to get your feet wet if you want the full benefits of the machine. Don’t be afraid to get in there and press buttons. You can always do a factory reset and start again, if you’re not certain. Great tutorial. _/👍🏻
I am running the legend 1.17 with the lg24 coil. I loaded this coin program and headed to the a park that I often struggle to hunt because of the amount of trash; problem solved! This will be a useful program for these type of situations. I am planning on trying the LG 15 coil if the ground don't freeze before the weekend.... otherwise outstanding! thanks for the video!
Nice to see this with the 1.17 software. My coin program is similar except my fourth tone break goes to 42 to lower zinc penny tones/volume. I run the fifth tone break to 55 and lower the sixth break 56-60 volume and tone to match the iron sound and volume. This works great in the Seattle area. Thanks again.
Once you have a program saved and you want to fine tune settings all you have to do is shut your detector off after you make the changes. It will automatically save where you left off. I have the nickel setting narrowed to 26-27. When I get that tone, I say it is either a nickel or garbage and 90+ percent of the time it's garbage. 😂. Great/helpful video, thanks!
Last big gold earring found on beach Mw, was a 33…I almost passed due to multiple pull tabs in same range…basically I dig everything 11 on up unless there is a ton of foil…then 19 on up.
Just in time for the holidays! If you would like to gift someone a membership to my Patreon group you can do so by clicking here: patreon.com/mentalmetaldetecting/gift
Thanks for doing it agian , was wanting to re program into the 1.17 found some good coins with this program
sure my pleasure.
Hello Mental Metal. You’re the first I’ve seen do it in the order I’ve been programming my Legend. It’s a little of a learning curve, when you first start, but like every thing computerized, you have to get your feet wet if you want the full benefits of the machine. Don’t be afraid to get in there and press buttons. You can always do a factory reset and start again, if you’re not certain. Great tutorial. _/👍🏻
Thanks!
I am running the legend 1.17 with the lg24 coil. I loaded this coin program and headed to the a park that I often struggle to hunt because of the amount of trash; problem solved! This will be a useful program for these type of situations. I am planning on trying the LG 15 coil if the ground don't freeze before the weekend.... otherwise outstanding! thanks for the video!
You are very welcome.
Nice to see this with the 1.17 software. My coin program is similar except my fourth tone break goes to 42 to lower zinc penny tones/volume. I run the fifth tone break to 55 and lower the sixth break 56-60 volume and tone to match the iron sound and volume. This works great in the Seattle area.
Thanks again.
Hey Scott. Really glad you did this video. Thanks for your time! Can’t wait to get this out in the dirt.
You bet! I’m excited for you to find some great stuff with it.
It has been a while. Good refresher video. Thanks!
Thanks for watching!
Once you have a program saved and you want to fine tune settings all you have to do is shut your detector off after you make the changes. It will automatically save where you left off. I have the nickel setting narrowed to 26-27. When I get that tone, I say it is either a nickel or garbage and 90+ percent of the time it's garbage. 😂. Great/helpful video, thanks!
thanks for the info. How can i store this coin programm. Missed that one... thanks
Last big gold earring found on beach Mw, was a 33…I almost passed due to multiple pull tabs in same range…basically I dig everything 11 on up unless there is a ton of foil…then 19 on up.
Great refresher. Have you noticed any improvement in the program’s performance with version 1.17?
My legend was at 1.11 I downloaded 1.17 am I going to have to go back and go from 1.13 up through all the downloads to 1.17 dumbfounded.
No... just update using 1.17, as all updates are cumulative up to that update. I went from 1.13 to 1.15 and then to 1.17 when it came out.
I forgot about it after reset detector 😂