I have some in my house didn’t work out for me so HPpy I got a use for them now. My mom got some crocs today I wanna try n make some charms. ❤️❤️🧡💙 new subbie
@@themostcraftynurse3914 I’ve tried a couple and when I do glitter on top with resin, it peels away. I tried with sticker paper an it curled up. How did you get it to stay on your projects?
I’m sorry start with the backside and sand both sides first, You have to get the resin on both sides so that the resumes sticking to itself not the cutting board.
@@themostcraftynurse3914 Thanks! I tried before I saw your reply lol...I just used the normal blade that came with my cricut explorer and I set to chip board!! Worked an absolute treat!!! Thank you :)))
It’s so interesting because I have these plexi pieces I use for boarders and it peels off but just like these when I put it on as a top coating it stays. It’s all amazing to me. I’m going to start using these.
So thicker is honestly hard, I did a video on cutting acrylic but it is only .20mm (fine if you add epoxy) but those you gave to do a little bending. The cricut can not cut to thick material. For thicker pieces I buy them cut. I have got them from Amazon, Ali express, but for fun pieces I use 3rd degree laser. The prices are super good and they have a Facebook page where you can get the svg to hatch the cut. And thank you friend.
I don’t remember it’s exact passes any wood setting works though, the veneer setting was quick but it cuts straight through first go round do you do not have to reset it.
So so great. Amazing idea. I love this for my students. So if I’m trying to do these charms for my students as rewards but don’t want to spend the money on epoxy, can u suggest any other type of sealer that won’t make the ink run but keep them somewhat protected?? Thanks so much. I’m subscribing now. Whooo boo Happy to have found your channel ❤️❤️❤️
Love this! Thank you for introducing me to a new & inexpensive material.
Thank You to the ONE FRICKIN' STRAIGHT ANSWER I CAN GET ON THE WHOLE INTERNET on how to actually cut *through* this material. Life saver!
I’m glad it was helpful friend❤️
Thank you for the tutorial it was really helpful. I love this for my custom hair bows.
Thank you for sharing, now I need to go to the Dollar store 😊
What a fun idea!
Thank you so much
Oh your on to something! Oh the ideas you just started in my head 🤣 I think I’m going to go get some and make some name plate keychains
Yes!! So I have some drying waiting to turn over with resin. I’ll share when they are done. So much to do 😂
@@themostcraftynurse3914 yesss please do I’m still up thinking of stuff🤣
@@themostcraftynurse3914 thanks for sharing! Would love to see the completed project with resin ❤️
Printable vinyl?
Can you use these for badge reels? Maybe with epoxy over them?
I have some in my house didn’t work out for me so HPpy I got a use for them now. My mom got some crocs today I wanna try n make some charms. ❤️❤️🧡💙 new subbie
Welcome friend!❤️I love making charms and earrings it is so fun finding all the different products you can use. Let me know how your charms turn out.
Thank you for sharing this information, do you have any pictures or video of a finished project with resin on it?
I’m sorry I gave them all away, next time I make them I’ll film that portion as a video.
@@themostcraftynurse3914 I’ve tried a couple and when I do glitter on top with resin, it peels away. I tried with sticker paper an it curled up. How did you get it to stay on your projects?
I have the same issue, and I’ve used two different printers!! My printer does not like that paper. Great project!
Thank you friend, yes it’s such a pain.
will uv resin work to seal
Have you tried resin to seal? If so, can you share how you went about it?
Loved the idea, but when I tried it, I noticed the resin does not stick to the cutting board cutouts.
I’m sorry start with the backside and sand both sides first, You have to get the resin on both sides so that the resumes sticking to itself not the cutting board.
hi there! Great tutorial :))) Can this be cut on the cricut explorer or just the maker?
Yes, this one can. Use the deep cut blade.❤️
@@themostcraftynurse3914 Thanks! I tried before I saw your reply lol...I just used the normal blade that came with my cricut explorer and I set to chip board!! Worked an absolute treat!!! Thank you :)))
❤️❤️❤️❤️❤️
I use those cutting mats from $tree in lieu of silicone mats
Oh goo to know
The most crafty Nurse peels right off
It’s so interesting because I have these plexi pieces I use for boarders and it peels off but just like these when I put it on as a top coating it stays. It’s all amazing to me. I’m going to start using these.
Thanks
I never used a Cricut before
Where did you find the cricut sticker paper? I guess I've never looked for it or saw it jahaha🤣😆
You saved me
Yay!!❤️
How fun! Where did you get your images? A prescription label would be so cute lol would these work for the shrinky dinks?
What if u wanted it thicker. How would u do so. Oooh ty. N I subscribe to ur channel
So thicker is honestly hard, I did a video on cutting acrylic but it is only .20mm (fine if you add epoxy) but those you gave to do a little bending. The cricut can not cut to thick material. For thicker pieces I buy them cut. I have got them from Amazon, Ali express, but for fun pieces I use 3rd degree laser. The prices are super good and they have a Facebook page where you can get the svg to hatch the cut. And thank you friend.
How many passes does the wood veneer setting do to cut the mat through? Thanks for the idea!
I don’t remember it’s exact passes any wood setting works though, the veneer setting was quick but it cuts straight through first go round do you do not have to reset it.
Great video! Love this idea. Did you increase the pressure to more or left it at default? Just subscribed to your channel!!
Thank you friend❤️ welcome. No I did not have to change pressure at all.
@@themostcraftynurse3914 okay, thank you. So far I am on pass # 4 and it is still not cutting through. :(
So so great. Amazing idea. I love this for my students. So if I’m trying to do these charms for my students as rewards but don’t want to spend the money on epoxy, can u suggest any other type of sealer that won’t make the ink run but keep them somewhat protected?? Thanks so much. I’m subscribing now. Whooo boo
Happy to have found your channel ❤️❤️❤️
Yes for sure, you could do a couple coats of clear glaze spray. You can get it at hardware store or Walmart
I make Earrings out of card stock may use this method. 😵😵😵😵
I did some Halloween earrings with salt and card stock I was really surprised at how well they stood up.