Great presentation. I did similar data acquisition back in the 2009 where I used the DAQ to collect data from medical instrument and display it on the laptop screen along with some animations. What those devices can do is amazing.
Great presentation! I was just wondering when you connected one end of the Function Generation output to ai0 (AI0+)of your DAQ, where did the other end go? Should this go to ai4 (AI0-; differential), or GND? I have a function generator with the output cable having two ends.
I am working on a project to design quadrature-oscillator which produces sine and cosine, after which I will create a simple experimental arrangement to examine the motion of the neodymium magnetic spheres as the model magnetic nanoparticles in this magnetic field. I will like to know if I can use Mydaq as quadrature oscillator and will be glad if you make a video about it. thank you.
very informative one. I hope if you can explain more how to write the data with the time in ento excel sheet in order to investigate and analyze the data output, thx.
Hi. I am working on NI-DAQmx (USB 6215) device and I am using python to capture signal from the device. I need to capture signals from 16 channels at the same time and display using matplotlib and pyqt4. I have looked into documentation, I found and implemented a code that captures from 1 channel but not from 16 at the same time. Any suggestions if this is possible? Thanks in advance
Sir, I want to connect ZM2376 LCR meter with LabVIEW... I checked its data sheet, only in this model, IVI driver is supported. Kildly provide block diagram of (frequency vs impedance) or frequency vs time..
Hi.i am going to do project using USB 6000 device can i use five input sensor?i.e wind speed sensor,solar radiation sensor,temperature sensor ,relative humidity sensor and carbon di oxide gas sensor.
please, if I haven't DAQ device and I want to acquire signal comes from a spectrum analyzer using (USB port). what is the first block I must put to enter the signal then to get this signal in the output to analyze it and draw graphs
Hello bro in ur tutorial u have not applied the voltage from daq is it okay Because according to my perception the ni daq plot the signals produced by variation in 5 volt from it am I correct I want to read the signals from AD8232 heart rate sensor into LabVIEW using daq can u please help me I have liked and subscribed please help me 💖🙏🙏🙏🙏
Wonderful tutorial!!!! You are explaning it very well. Currently I am working on my Masterthesis and I need to sent out analog and digital signals. I would really like to contact you in private to ask you some question when I need help. Is that possible. I will invite you also for dinner I promise. :D
Great presentation. I did similar data acquisition back in the 2009 where I used the DAQ to collect data from medical instrument and display it on the laptop screen along with some animations. What those devices can do is amazing.
This is great, very clear explanation. I would like to have the same thing for more than one input signal... Thank you
6:16 that smile tho ! XD
He: "Smiles"
Me: "Dies in 7 days after watching this video"
Great presentation! I was just wondering when you connected one end of the Function Generation output to ai0 (AI0+)of your DAQ, where did the other end go? Should this go to ai4 (AI0-; differential), or GND? I have a function generator with the output cable having two ends.
short, clear and exactly what i needed to get started! Great tutorial
You guys are literally awesome.
literally!
I am working on a project to design quadrature-oscillator which produces sine and cosine, after which I will create a simple experimental arrangement to examine the
motion of the neodymium magnetic spheres as the model magnetic
nanoparticles in this magnetic field. I will like to know if I can use Mydaq as quadrature oscillator and will be glad if you make a video about it. thank you.
Excelente necesitamos más ejemplos, directos a NI VeriStand. Gracias...
The DAQ diagnostics utility is broken. Does not have the tests folder in it. Can anyone help?
It's awesome. Could you show me a tutorial which present about PCI NI and C#?
Thank you.
very informative one. I hope if you can explain more how to write the data with the time in ento excel sheet in order to investigate and analyze the data output, thx.
Do you really need USB DAQ device? I believe that you can directly communicate to your function generator using USB or RS232 communication?
Hi. I am working on NI-DAQmx (USB 6215) device and I am using python to capture signal from the device. I need to capture signals from 16 channels at the same time and display using matplotlib and pyqt4. I have looked into documentation, I found and implemented a code that captures from 1 channel but not from 16 at the same time. Any suggestions if this is possible? Thanks in advance
Sir, I want to connect ZM2376 LCR meter with LabVIEW... I checked its data sheet, only in this model, IVI driver is supported.
Kildly provide block diagram of (frequency vs impedance) or frequency vs time..
Hi.i am going to do project using USB 6000 device can i use five input sensor?i.e wind speed sensor,solar radiation sensor,temperature sensor ,relative humidity sensor and carbon di oxide gas sensor.
please, if I haven't DAQ device and I want to acquire signal comes from a spectrum analyzer using (USB port). what is the first block I must put to enter the signal then to get this signal in the output to analyze it and draw graphs
Hello bro in ur tutorial u have not applied the voltage from daq is it okay
Because according to my perception the ni daq plot the signals produced by variation in 5 volt from it am I correct
I want to read the signals from AD8232 heart rate sensor into LabVIEW using daq can u please help me
I have liked and subscribed please help me 💖🙏🙏🙏🙏
How can i send digital signal to cDAQ-9171 with NI-9401 module at a resolution of microsecond in Windows?
Guys, can i generate analog current using NI-DAQmx and it possible to control the time?
Can this function change to digital input channel?
why using the signal graph instead of the chart?
Good question, I was wondering the same...
Hi. Do you have the same application but, in LabWindows? Thanks!
Vaneet is a boss!
Wonderful tutorial!!!! You are explaning it very well. Currently I am working on my Masterthesis and I need to sent out analog and digital signals. I would really like to contact you in private to ask you some question when I need help. Is that possible. I will invite you also for dinner I promise. :D
How did it go?
it not work?!!!!
Wonderful tutorial.
works very well. Thank you!
Thank you sir . Regards.
Thank you
more link ser please
good
Guys, can i generate analog current using NI-DAQmx?
Yes u can. NI 9203 for +/-20mA