Hi, I will Paypal you 50Euro if you can help me to add some extras to my Nextion display I can follow your tutorial and create it but to put it in the Arduino is too much for me This is the project which is now working but the Nextion is very poor and the 2 buttons are on the Arduino as you can see from the following link th-cam.com/video/eFs2ePMQz8c/w-d-xo.html I want to add the 2 buttons (up and down) on the Nextion and then display the stations when pressed You can see in the link the TFT, HMI, and the SKETCH - Nic Koumaris had sent me some minor correction to get it working properly. Also a volume control will be an advantage If you think you can help, please contact me by email - erikhoffman@live.com Many thanks Erik
I watched some other videos on how to do this and got confused until I watched your video and I got my project up and running in a few minutes. You are very well spoken and clear instructions, Thanks Amigo
Excellent video. I have a 3.5" Nextion display and connect it to my PC using a CH340G RS232 to TTL module. This allows me to transfer my code from the Nextion IDE directly to the screen without having to use a MicroSD card.
@@vishalgaurav4411 I just bought one of these www.aliexpress.com/item/1PCS-CH340-module-instead-of-PL2303-CH340G-RS232-to-TTL-module-upgrade-USB-to-serial-port/32802856751.html?spm=a2g0s.9042311.0.0.35864c4ddmFaMU Plug the USB end into your PC, make sure it is set to 5V and connect the 4 wires from the Nextion display, remembering to connect Rx to Tx and Tx to Rx. In the Nextion Editor you click the Upload button and select the correct COM port if you have more than one. The code is then transferred to the display.
I know that they are no good for small projects, but if I need a touch screen I tend to just buy the cheapest android tablet on the market at that time and interface it with the arduino through Bluetooth or USB. I actually just brought 5 kindle fire 7's as they were on offer for £25 last month. Must have been selling below cost.
A real 2018 power supply, awesome! I need to switch between a center tap and a normal positive, negative and carry all of that current. I have a Toroidal 24vx24v-24v-0-24v-48v 13a~26a 625watt
Nextion are great for GUI and run a bit faster than the cheaper TFT’s. Get the 3.5” though they are worth the extra few dollars. UPDATE: I think this is such as good video for anyone interested in learning the Nextion, I am going to give away a '3.5" Enhanced Memory LCD' when this video gets to 20k views! Ill post the giveaway shortly. Be sure to support ElectroNoobs and share this video with all your friends! Also, I am gonna send him a care package; with some high end VREF's and lots of other fun stuff (message me brotha and we can set it up.)
Looks great... might have a fiddle with the editor before committing to buy one. Will mean I can concentrate on my actual projects and not on trying to fudge a GUI from scratch to set parameters.
A TFT file is no longer built and placed in the bianyi folder on Compile. To generate a TFT file, one has to use the TFT file output menuitem located under the File menu.
I love Nextions, but the lcd itself is terrible and can only be viewed at certain angles. Can you make a tutorial on how to replace the lcd with a better one?
Thanks a lot for this information.. Could i use the same program with tft display 1. 8'' ( SPI serial) or there is any other program to use with this screen?!
I have tried to input (AD8232) Heart rate monitor's output signal into NEXTION TFT by connecting with ESP8266 using the above code but it didn't show any Waveform . is there any specific method to get that output signal into TFT screen?
hey! I want to measure a voltage between 0 and 5V. I have the values showing on the screen now from 0 to 5, but how can I show a value for example 3,2 instead of 3? What is the easiest way?
I can't get any value in the nextion screen! i followed your potentiometer project to implement my hall effect sensor to measure rpm. I am getting the value at Serial monitor but i am not able to get the value of the rpm on the screen. Please help!
the drawing of your waveform appears to change direction. As long as the screen is not full, it is draw like on any oscilloscope from left to right, but once the screen is full, scrolling rolls the already displayed waveform from left to right, instead of right to left, as would be the usual way.
Hey!, Awsome videos as always. I dont have Nextion display but insted Geekcreit® 2.8 Inch TFT LCD Shield. Does Nextion IDE work with this model becase this one have a sdcard reader? Thanks again for the video!❤️
Is it possible to display the value of the pressed button in the text box placed on the second page by pressing the button (the value is 10) on the first page with only NEXTION TFT?
I am building a controller with this touch screen but I need to get the Arduino to request the value of components on the nextion to turn on and off outputs
The last file path "bianyi" is the direct romanization(transfer Chinese into English by sound) of the Chinese word "編譯" which means "compile" And the attachment name of the font "zi" is the romanization of the Chinese word "字" which means "word" lol
Ok it's work. Just upload data to arduino. Than connect the display. Great job. It so easy. I just start my adventure with nextion and arduino. I couldn't find any instruction on how to comunicate with the display. Thank you again.
Hello, i try to use part of your project(power supply), the question is: when i press back i would like to send a string ,not byte , for example 5 as "5", how i can do it....? i am not using nextion often.......Thank you
Want to help my workshop: www.patreon.com/ELECTRONOOBS
Thank you so much!
Hi, I will Paypal you 50Euro if you can help me to add some extras to my Nextion display
I can follow your tutorial and create it but to put it in the Arduino is too much for me
This is the project which is now working but the Nextion is very poor and the 2 buttons are on the Arduino as you can see from the following link
th-cam.com/video/eFs2ePMQz8c/w-d-xo.html
I want to add the 2 buttons (up and down) on the Nextion and then display the stations when pressed
You can see in the link the TFT, HMI, and the SKETCH - Nic Koumaris had sent me some minor correction to get it working properly.
Also a volume control will be an advantage
If you think you can help, please contact me by email - erikhoffman@live.com
Many thanks
Erik
Please let m e know how many page we can create in Nextion 3.2"
I watched some other videos on how to do this and got confused until I watched your video and I got my project up and running in a few minutes. You are very well spoken and clear instructions, Thanks Amigo
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
You are absolutely a superb teacher....courses in english would be the best thing every.....
I came here to learn to read and write the data and wow didn't know it was just that easy. Thank you so much for this tutorial!
You’re explanation and pace of videos is excellent! Thanks for your hard work to research and produce these videos!
Excellent video. I have a 3.5" Nextion display and connect it to my PC using a CH340G RS232 to TTL module. This allows me to transfer my code from the Nextion IDE directly to the screen without having to use a MicroSD card.
Is there any tutorial to follow this ?
Any tutorial for this anywhere ?
@@vishalgaurav4411 I just bought one of these www.aliexpress.com/item/1PCS-CH340-module-instead-of-PL2303-CH340G-RS232-to-TTL-module-upgrade-USB-to-serial-port/32802856751.html?spm=a2g0s.9042311.0.0.35864c4ddmFaMU
Plug the USB end into your PC, make sure it is set to 5V and connect the 4 wires from the Nextion display, remembering to connect Rx to Tx and Tx to Rx. In the Nextion Editor you click the Upload button and select the correct COM port if you have more than one. The code is then transferred to the display.
@@Ivor_Nastyboil thank you
I think the new ones have an USB interface instead of the memory card.
excellent! Have been waiting on one of these displays to arrive from china and should be here any day now. Perfect timing. TYVM!
Happy to hear that!
@@ELECTRONOOBS how can his reply be 2 days back if u have uploaded today only ?
Dear how your reply is in past than the video upload time ? How you replied 2days back when video is uploaded today ? 😂
Vishal Gaurav patreons get early access
I came after seeing ur post on Instagram page's post..man ur video r really good man...
I know that they are no good for small projects, but if I need a touch screen I tend to just buy the cheapest android tablet on the market at that time and interface it with the arduino through Bluetooth or USB.
I actually just brought 5 kindle fire 7's as they were on offer for £25 last month. Must have been selling below cost.
Very well explained ! I'm now getting into to this. I have the display laying around for over a year....
Amazing Video As usually. I just bought a Nextion Display 2.8" to work with. Keep up the great work.
Great video. Good progress with examples. To finish with the real project. I will order a TFT right now! Wait to see more.
Nextion TFT display
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
This is amazing. I already knew about the Nextion display, but I had no idea about this editor. Great stuff! Subbed. 👍
Very cool, I already have seen this display but I was afraid to buy it, but now I am interested on it again.
To me is a little bit expensive to buy it, the Brazilian taxes to import are abusive.
@@vilmondesribeiro4363 Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
A real 2018 power supply, awesome! I need to switch between a center tap and a normal positive, negative and carry all of that current. I have a Toroidal 24vx24v-24v-0-24v-48v 13a~26a 625watt
Wow! I new that some display and touchscreen were aailable, but not at that price and quality software! Thanks!
That looks sweet. The combat engineer says it is very nice.
Fantastic display, dude! Really nice! 😃
Best tutorial vid I've come across so far.
Keep up the good work
Someone give a big prize for the person who disliked such a good video 😑
Very important i am very happy 😊
Nextion are great for GUI and run a bit faster than the cheaper TFT’s. Get the 3.5” though they are worth the extra few dollars.
UPDATE: I think this is such as good video for anyone interested in learning the Nextion, I am going to give away a '3.5" Enhanced Memory LCD' when this video gets to 20k views! Ill post the giveaway shortly. Be sure to support ElectroNoobs and share this video with all your friends! Also, I am gonna send him a care package; with some high end VREF's and lots of other fun stuff (message me brotha and we can set it up.)
how did u do the programing of the select decimal from part 12:30 to 12:42
Wow excellent tutorial. Precise and to the point. Thanks !!!
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
good efforts, really helpful.
respect from Pakistan
Awsome tutorial..very well explained ❤
Nice video and nice project
Please can you make tutorial like how to make password door lock system with this Nextion Display ?
Димчо Събев I can work on a video like this. Do you want a password with letters or just numbers?
Budget Tool Reviews i want just numbers but letters will be nice to see.
Here is the video. I hope you enjoy:
th-cam.com/video/7HNL4lcD8P8/w-d-xo.html
Even I want one with numbers
Did you try to use like a remote with a battery ?
Looks great... might have a fiddle with the editor before committing to buy one. Will mean I can concentrate on my actual projects and not on trying to fudge a GUI from scratch to set parameters.
A TFT file is no longer built and placed in the bianyi folder on Compile. To generate a TFT file, one has to use the TFT file output menuitem located under the File menu.
excellent sir👍👍👍👍👍👍👌
Very well explained. Thank you!
Can you make a finger print door lock for 5 men finger print active door?
Must replay..
Excellent... Exactly what I was looking for... Subscribed.
Very well explained and good demo. Thanks!
I love Nextions, but the lcd itself is terrible and can only be viewed at certain angles. Can you make a tutorial on how to replace the lcd with a better one?
very informative. One of the things i wanted to bulid!
Wow sir i am your big fan, you are the best .
Thanks a lot for this information.. Could i use the same program with tft display 1. 8'' ( SPI serial) or there is any other program to use with this screen?!
beautiful tutorial
dear sir.. can i use this editor for tft shield display?
I have tried to input (AD8232) Heart rate monitor's output signal into NEXTION TFT by connecting with ESP8266 using the above code but it didn't show any Waveform . is there any specific method to get that output signal into TFT screen?
How about displaying a weight using hx711 loadcell to the nextion. Can you do a tutorial? Thank you.
hey! I want to measure a voltage between 0 and 5V. I have the values showing on the screen now from 0 to 5, but how can I show a value for example 3,2 instead of 3? What is the easiest way?
Do u still have that mini drone pcbs
hi is where to do monitor and capture the highest and lowest point of the voltage display on nextion?
I can't get any value in the nextion screen! i followed your potentiometer project to implement my hall effect sensor to measure rpm. I am getting the value at Serial monitor but i am not able to get the value of the rpm on the screen. Please help!
Waiting for the brushed drone !
Thank you so much for this tutorial 🙂
Great video! Thank you for sharing.
can u make that as oscilloscop..?? thatt will be good in practical use
the drawing of your waveform appears to change direction. As long as the screen is not full, it is draw like on any oscilloscope from left to right, but once the screen is full, scrolling rolls the already displayed waveform from left to right, instead of right to left, as would be the usual way.
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
what's the point of those 3 full bytes at the end of the arduino code?
I have a mac computer and nextion editor can't work on mac any alternative to use?
Very nice tutorial. Thank you
Hey!, Awsome videos as always. I dont have Nextion display but insted Geekcreit® 2.8 Inch TFT LCD Shield. Does Nextion IDE work with this model becase this one have a sdcard reader? Thanks again for the video!❤️
No. The sd card reader on yours is for storing pictures only. Not for nextion files
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
@@Nicksperiments Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
Is it possible to display the value of the pressed button in the text box placed on the second page by pressing the button (the value is 10) on the first page with only NEXTION TFT?
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
Great work
Hello when you make a part 2 ?
Cool continue bro and big up
10:38 Why do you do it like that? You could simply have put: String Tosend = "add 1,0," + Value;
Hi. Very cool . How to conect this to variable power supply ?
distilled refined knowledge
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
Is it resistive or capacitive touch?
please please make the video on how to make power supply which will use in actual produts
pls
I am building a controller with this touch screen but I need to get the Arduino to request the value of components on the nextion to turn on and off outputs
loved your tutorial
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
@@rachelchow4512 sure send me info to freidoon@dufuengineering.com
How could I get this and what's the price
Good day Sir Electronoobs. Can you teach more about nextion display interfacing together with arduino..
Thank you and more power!!!
Brother ❗️
I want to control my small steam boiler by my Arduino with TFT.
I even don't no it is possible or not.
Can you help me 👱....
Can you recompile for nx4832T035
The last file path "bianyi" is the direct romanization(transfer Chinese into English by sound) of the Chinese word "編譯" which means "compile"
And the attachment name of the font "zi" is the romanization of the Chinese word "字" which means "word"
lol
really nice
Nice video for yet display.but sir please make a video for 12464 graphics lcd display
HMI file is disponibilize ?
thanks for you videos ,i have question,is there a possibility to make nextion display like a serial monitor of arduino?
Can you use a flashlight to shine into itself?
Great instructional video
I would love to use this display to make a set of Arduino car gauges.
Thinking the same. Custom extended gauges, connected to OBD2
Great video , thank you
Just to say wooooow😮😮
DO YOU RECOMMEND IT FOR HOME AUTOMATION??
hello, I think there is a chance for us to cooperate. I can recommend the appropriate products you need for LCD
Hi, thank you for very good video! how remove "white flash" when you change page to other page on Nextion display? it is a possible?
Hi will you consider to look at the DWIN display,?kindly send me an email or message referring to my banner contact info.
please make a project "How to make an diy oscilloscope", it would be really helpful.
Greart bro love from #Bangladesh
My nextion inteligent lcd doesn't work :(. Did you include any libraries? I have no comunication lcd with arduino.
Ok it's work. Just upload data to arduino. Than connect the display. Great job. It so easy. I just start my adventure with nextion and arduino. I couldn't find any instruction on how to comunicate with the display. Thank you again.
just perfect. thank yooooooou🥰
Sir
Can you please make a video on how to make a diy MSP430G2553 Launchpad
Please make video on arduino based self balancing segway
And how to land a spaceship on the moon.
Hello, i try to use part of your project(power supply), the question is: when i press back i would like to send a string ,not byte , for example 5 as "5", how i can do it....?
i am not using nextion often.......Thank you
maybe I can help you
Great tutorial....appreciated...
Wow nice
Can I program a radar
great video
Did my comment on Facebook helped?
You are good teacher 👍
but can it run crisys???
Good Stuff from you Sir.
0:26 *ahem*... you meant
FUUUUUUUULL BRIDGE RECTIFIER
right?
nice and useful video !
can you share pls hmi file for wave ?