KATANA Sword Forging - A sword with the perfect combination of modern and classic
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Another successfully forged KATANA sword, I like this design, what about you? Let me know below in the comments!
Connect with me :
/ randomcrafteds
/ anhthoren
Please let me know if you like this KATANA sword design
Of course i like!!!
@@ANGEL_ANDRES Thank you, glad you like it!
@@Arts-and-Crafts is a great work, really.
@@ANGEL_ANDRES Thank you very much bro
Oui il est absolument magnifique, bravo 👏
The way you craft the handle is very interesting. And the result is really nice !
Thank bro !!
This is much better katana than old school katanas.
Man that is gorgeous. You did a great job
this is absolutely gorgeous
Nice work! Hope to see one of these made of beskar in the next mandalorian seasons!
Thank you ! I will add it to the list
This is my first video in 2024 of forging a katana and it's amazing, 100/10. I would love to order a katana of my choice
Thank you for loving it, have fun watching my video!
Star wars theme Katrina love to see that
Next time you should try forging/recreating a sword from the game Ghostrunner. It has cool futuristic sword designs in my opinion.
Thank you, that's a good suggestion, I'll check it out
WOULD LIKE TO HAVE LEARNED THESE THINGS WHEN I WAS YOUNGER.. NOW THAT I AM OLDER THO, I HAVE EVEN MORE APPRECIATION FOR THE WORKS OF THE MIND...😎!
I RESPECT THIS PART OF YOR MIND
Incredible craftsmanship
Thank you !!!!
I pressive,looks like a lightsaber with a physical blade
Nice sword. Enjoyed the video
Thank you very much !
Que buen trabajo y que hermosa espada....saludos bro....😊
Thank you very much
It almost looks alive with that eye on the handle! Was half expecting an AI voice to start talking, ranking your cuts and swinging technique 😂
Thank you, haha it would be interesting if that happened
Beautiful design looks cool.💯👍
thank bro !!
That sword would be a great prop for a movie 😅
It could be the collection or like what you say, but be careful with its sharpness! kkk
Magnificent
Thank bro !!
Nice blade I like it nice and clean sword. #keep it up I'll watch every time.
Thank you for liking this sword!
i liked before watching the vidéo 🔥
Thank bro !
She's looks like of dune saber ☄️👺🔥🐉🐉☄️🔥🔥🔥🔥🗡️
Shadow Slayer from Shadow fight 3
Fr
Отличный клинок, работа впечатляет 😊
Thank bro !!
ficou simplesmente lindo sério ficou algo meio cyberpunk mais também tem um ar meio místico perfect
Thank you, glad you like it!
The katana has a sharpening of the blade into the lens.
Very cool !
أحسنت العمل متقن ❤
Thank bro !!
The good: Beautifully polished, unique handle, and well-crafted.
The bad: The tsuba is a little too simplistic, the blade isn't curved as much as a standard katana or as long and the tip is too wide.
Thank you ! This is not a traditional katana, you can see traditional katana in my channel
It"s so cool
👌👌
Yes i like it
Thank you bro !!!
Nice Work but the Handle is a lil to Round.....for a Katana 😉👍
because it is suitable for modern designs
No problem when you get it done ship it with the Katana
I will learn how to do this!
That would be Great !!
刀にモダンさを求める日本人って居ないと思う。好きな人がそれっぽいの作ったらいいんじゃないかな。
I think traditional swords are beautiful, but sometimes you should try to innovate it!
Did you use a type of paint for the groove? If it is can u tell me what it is? Also great work and design, love to see more❤
Looks more like a ninja sword than a samurai katana.
Thorfinn's daggers
Can you make a Scabbard for it. That might not be the correct name of it
Its scabbard could take me a few days to make
Hermano crees que podrias hacer la hoja del caos de dark souls?
❤
How much cost a sword like this if you sell it to me?
Thank you for loving it, I can't sell it right now, maybe in the future!
Tell me, please, what did you color the metal with? I want to make a Rengoku katana at home, but I don't know how best to paint it in red, orange and yellow colors so that the drawing is stable enough
It is epoxy glue
@@Arts-and-Crafts thank you
Looks great, but It's a katana style sword, not a real katana though.
Thank bro !!
すごいですね👍🔥🩷和と電磁科学の要素を上手く合わせて、日本や🇯🇵海外に馴染みのある日本刀に仕上げてますね😊🔥🩷俺も画用紙とレジンやダンボール📦なんかで製造しようかな？
Be creative in your own way, satisfy your passion!
You need a bigger anvil
Thank you, honestly I really want it, but it's very expensive for me!
Do you selling any?
Thank you ! I can't sell it now
👍
I'll purchase it if you would Honor me by selling it
No tiene las proporciones de una katana. Pues mide lo mismo de ancho en la punta qyen la parte del "habaki" y sobre el grosor. No se ve bien..pero tambien parece lo mismo.
It's not a traditional Katana
@@Arts-and-Crafts Aaah..ok.. Pues con lo tradicionales y específicos, que son los japoneses. No sé le puede llamar "KATANA" es un sable de dos manos. No es una katana, ni un tachi, ni un wakisazi, ni un ninja to.
@@africanogloriosus7474 Compare the size of computers a few decades ago, if you put it your way, it wouldn't be called a computer..or you can compare many things like TVs, cars, phones!
👏👏👏👏👏👏🤜🤛
Can u give me 1 katana
To short
Merci !
Thank you, I appreciate the love you give me!
Катана не Меч ! Это Сабля !
“Perfect combination of modern and classic” That, sir, it is not.
It feels more like a vibro-blade than a katana, but then again perhaps I’m biased against modern interpretations of katana.
Artistic opinions aside I think you’ve got some serious issues going on structurally, primarily in the handle.
You made a cylindrical handle, which doesn’t lend well to swords because they throw off the indexing. That’s the major reason why your demo cuts weren’t straight, the blade itself wasn’t indexed correctly in your hand so when you went to cut the bottles the blade followed the angle it was held at and curved the cut. Practice could also be a part of it, but the handle shape certainly wasn’t helping any.
You skeletonized the wood you used for the handle, leaving maybe a quarter inch of it in the center, then charred it. I understand charred wood is more durable, but you know what else char does? Prevent epoxy from adhering, so you’ve definitely got a weak bond between the epoxy and the wood.
Finally, your mekugi pin was drilled right through the thin wood neck and is, at least to my eye, way thicker than the neck was before you added epoxy.
So you took a thick dowel, turned it into a board, charred it, epoxied the char, and then drilled out what little wood there actually was, so now the only thing holding it together is the weak bond between the char and the epoxy.
Clearly that handle is strong enough to survive light demos, but give it a good couple whacks against something even remotely durable and your handle will shatter into at least 3 pieces and your blade will either be lodged in what you were cutting or on the other side of the room.
Trash to class in 20 minutes
This KATANA looks amazing, your skill and attention to detail are brilliant. Keep up the great work.
Thank you, hope you enjoy watching the video
Always do.
катана? просто длинный ножик.... попробуй ей циновку разрубить, хотя в современном мире катанами бутылки рубят.....
The fact that people say they are making katana, and all they do is make a sword which has few visual properties of a katana that's all.
Your work is good but please don't say it's a Katana
Looks fantastic 👍👍👏👏
this is not katana
Tienes razón el arma que hizo este tipo es mucho más resistente y mejor que una katana de forja tradicional
(Katana + Godzilla = ?????) Build Yuotube no name
This is something that resembles katana but the steel is 5160
The katana looks like it can be ignited to a fire katana
Die Schwertangel bzw Heft ist zu kurz, meine Meinung.
Is a lightsaber sword? That's what it reminds me of
Thank you, imagine it!
No temper?!? No scabbard?!?
nur weil etwas wie ein Katana aussieht, ist es noch keines
th-cam.com/video/0uUCtVu5dc8/w-d-xo.htmlsi=Me_X1bVQyVf8OIno
th-cam.com/video/bgBnSkDk46A/w-d-xo.htmlsi=jM9l1o0fMXIEpj2S timecode 22:15 and 27:00 there is no grind the cutting edge 🤔🤨
your sword is only copy crab bullshit that looks nice
Thank you for watching !
The KATANA looks cool. 👍👍
Thank you very much bro
Right off the back it isn't sharp enough.
Thank you for watching
Outstanding looking forward to seeing it in person. Wolverine is my call sign. You might not understand what that is. Thank you Very Much
The sword is great, now make a sheath for it, and remember a sword is always stored blade side up, and even then in a sheath, an open blade displayed means you are at war.
Your attention to detail is absolutely amazing, keep up the good work.
Thank you ! I will definitely do that
How much❤
It's the best design by far of this style. Awesome and amazing dude keep it!!!! I would love to get 🗡 like this kind.😊
Thank you for these kind words! I will always try to be better in the future!
If there was ever a sword that looked like a confused lightsaber. This would be it. Still some nice technique used though.
Thank you bro !!!
How much for a Katana like this?
I don't know because I didn't make it to sell! But if there was a price, I would sell it for 300-400 dollars
@@Arts-and-Crafts I will purchase your Katana if you would honor me by selling it.
@@mouseprosen Thank you, but I really don't know how to ship to where you live, I've never done this before!
Let the war on canisters continue forever and ever
thank you for watching
Good luck with the future projects
@@cyrilwingnek-qw1ik Please look forward to my future projects, it may please you!
I'm as curious as George,so I'll be checking
Make it little longer is perfect but btw the sword look very good, great job 👏
Thank you for your feedback, I have made quite a few long swords, but this is the sword with the length that suits me best :))
Looks like its from a movie or video game. Really cool almost like a lightsaber
Thank you for helping me give it a new name!
👍👍👍👍👍👍👍👍👍👍👍👍👍Великолепно😊
absolutely beautiful mate was a pleasure to watch
Thank bro !!
Beautiful
(Just curious, how much would this sell for?)
I don't know how much it's worth, I do it out of passion, I don't do it to sell!
@@Arts-and-Crafts
That is what makes you a true artist of your craft. I only asked because that piece is one that I'd love to add to my display case.
@@chornk64 Thank you, if you are lucky, maybe you will own it in the future, :))
It looked amazing, it looks like a lightsaber from the Star Wars movies
Thank you, why didn't I think of this sooner and give it a name :))
@@Arts-and-Crafts If it were up to me I would put Katana Laser on it :D
@@jesusgabriel5482 maybe I'll test it for next time :))
Handle is awesome. Nice work ❤
Thank bro !!
Super
I like it but I wonder what the handle is made out of
It is made from wood and Epoxy glue
thanks for telling me @@Arts-and-Crafts
刀の格好をした切れる鉄の棒だね、
Thank you for complimenting the iron bar!