You may have changed my life with this video (okay, maybe not my life;). I’ve been making RPE’s for years and have struggled. There are a few tips you gave that will help me so much. I just always did it the way I was taught and never used any critical thinking skills!
I rarely use the three prongs when bending RPE arms. They leave heavy knicks in the arms and leads to more time on rubber wheel when polishing after soldering. Beautiful work my friend!
The stuff I put on the model before I started soldering is heat shield ( the gray stuff) I use it to protect the wires and the screw from the heat of the torch If your wondering what the white stuff is is is flux it is uses to assist the solder to flow smoothly while melting. Otherwise it would just form a ball when melted and wouldn't flow around the wires. It also protects the wires from overheating while soldering.
I believe its a monoject syringe. Im thinking you can find it at your local pharmacy, but I also found them on amazon: smile.amazon.com/Kendall-Healthcare-1412012-Monoject-Syringe/dp/B00J9PB678/ref=sr_1_1?ie=UTF8&qid=1475639101&sr=8-1&keywords=monojet+syringes
I’m new to making RPEs and I need help! What exactly do I need to order to smooth the appliance after it is fabricated? Is the torch just standard with butane? Thanks you! The more tips the better!
Here is a video I made using only a hand piece to finish RPEs, currently, I use an acrylic bur to smooth the solder, then I just pumice and High shine the metal: th-cam.com/video/UkQGUveX2RE/w-d-xo.html The torch is a Hydroflux Welder is used water as its fuel source (Specifically the hydrogen the water) This is the exact unit: hydrofluxwelder.com/
Here in the us we us a different system to measure the thickness of the wire. The wire I used for the lingual arms of an RPE is .036" (I used and online converter and got .91mm)
@@RetainerDesigner want to order retainer my ideas is I will send my teeth mould to get my palatal expander at a reasonable price I need it Tell me if you can make it out
Hey there. Thanks for the video. I'm just wondering if I were to ship you a mould of my teeth, would you create a basic expander for me and ship it back? I would pay you of course!
@RetainerDesigner want to order retainer my ideas is I will send my teeth mould to get my palatal expander at a reasonable price I need it Tell me if you can make it out
You may have changed my life with this video (okay, maybe not my life;). I’ve been making RPE’s for years and have struggled. There are a few tips you gave that will help me so much. I just always did it the way I was taught and never used any critical thinking skills!
I rarely use the three prongs when bending RPE arms. They leave heavy knicks in the arms and leads to more time on rubber wheel when polishing after soldering. Beautiful work my friend!
Agreed, Sometimes when I see knocks appear, I will take a bit of sandpaper and some out the prongs, always helps
Thank you for all the tips, love your video.
You are Welcome!
I would appreciate it if you could see the process of making ALF appliance or Crozat appliance. Also, the wire heat treatment methods and processes. 😊
That's a great idea for a video concept! I haven't made these much, but I might try to make one and film it, should be funny!
You made my ortho more Strong..
This is great, I learnt a lot.
The stuff I put on the model before I started soldering is heat shield ( the gray stuff) I use it to protect the wires and the screw from the heat of the torch
If your wondering what the white stuff is is is flux it is uses to assist the solder to flow smoothly while melting. Otherwise it would just form a ball when melted and wouldn't flow around the wires. It also protects the wires from overheating while soldering.
Thats great idea that you have the heatproof stuff from syringe!!
Where I can get those from?
Thanks so much for the video!!
I believe its a monoject syringe. Im thinking you can find it at your local pharmacy, but I also found them on amazon: smile.amazon.com/Kendall-Healthcare-1412012-Monoject-Syringe/dp/B00J9PB678/ref=sr_1_1?ie=UTF8&qid=1475639101&sr=8-1&keywords=monojet+syringes
Where can I get the heat schield?
How much do these cost to produce? I'm curious for the markup most orthodontist's charge
I’m new to making RPEs and I need help!
What exactly do I need to order to smooth the appliance after it is fabricated?
Is the torch just standard with butane?
Thanks you!
The more tips the better!
Here is a video I made using only a hand piece to finish RPEs, currently, I use an acrylic bur to smooth the solder, then I just pumice and High shine the metal: th-cam.com/video/UkQGUveX2RE/w-d-xo.html
The torch is a Hydroflux Welder is used water as its fuel source (Specifically the hydrogen the water) This is the exact unit: hydrofluxwelder.com/
hi! what cement do we use in cementation in the real patient??
What kind of material is the thin wire that do you use to solder the RPE at 16:22 of the video?
That is .032 Silver Solder 9it is 56% silver, Cadmium Free)
hay, which is a tool in 7:50 minutes into the film(Bending the RPE arms) , a metal tube. where to buy
Hi, in the video I can't understand how many mm is the wire that you use for bending the lingual arms. Is it 1 mm or more please?
Here in the us we us a different system to measure the thickness of the wire. The wire I used for the lingual arms of an RPE is .036" (I used and online converter and got .91mm)
@@RetainerDesigner Thank yo very much for your kind reply!
Can You write, name for stand cast, when You bend wire? I want to buy, this type, but i don't know the name.
It is a "Great Lakes Model Holder" here is a link to it www.greatlakesdentaltech.com/great-lakes-model-holder_175-013.html
thanks for the video really inspire me
Glad to hear that!
Hi what kind of heat shield did you use prior to soldering. TIA
It is heat shield by Vigor here is a link: amzn.to/2XTdMLC
I would like to know the name of the bracket that holds the model, the one with 3 claws. thanks
Its a three prong plier
Great video. Thanks a lot. What is the name of that "arm bending device" (as you call it)?
it is actually called "Arm Bending Instrument for Rapid Expander" I get it from here: www.greatlakesortho.com/commerce/detail/?nPID=793
@@RetainerDesigner want to order retainer my ideas is I will send my teeth mould to get my palatal expander at a reasonable price I need it
Tell me if you can make it out
How long does it take to make that?
takes me about 10-20 minutes start to finish
💯💯
Thanks🙏
Welcome!
Hey there. Thanks for the video. I'm just wondering if I were to ship you a mould of my teeth, would you create a basic expander for me and ship it back? I would pay you of course!
Crazyfish
Wth
Can you make a video on how to bend a TPA..pleeease!
No problem!
Cade Tippett what kind of torch do you use
I recommend editing out pt name at 8:46
Sitting in a lab with 20 lingual arches and a hyrax in front of me
Just makin" $$$!!!! 😀👍
Super boss
I need it for my teeth!
@RetainerDesigner want to order retainer my ideas is I will send my teeth mould to get my palatal expander at a reasonable price I need it
Tell me if you can make it out
Jones Jennifer Wilson Jeffrey Davis Betty
কি
Waste of wire with the handle lol I just use wax to hold where I'm not going to solder
Thats true! but i find its easier to wax into place if I can hold the wire in place with a handle :)