Solidworks tutorial | Sketch Heat Exchanger in Solidworks

in this tutorial video i will sketch Tubular Heat Exchanger. a device for transferring heat from one medium to another.there are 6 Parts.
1)Shell
2)Tubes bundles, (208 tubes)
3)Shell Cover
4)Head Cover
5)flanges
6)Saddles
I hope you will enjoy, Please Subscribe our Channel for more projects in Solidworks.
Thanks for Watching.
/ cadcamtutorial

[@carlosmaffessoni4638]

Extraordinary lesson! I'm chemical engineer and I'll take advantage for my work, using parts, commands and so. Thank you again!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, i hope you enjoyed.

[@abhimanyu448]

Many Thanks, I learn so much so simply from your videos, it`s like back to school.

[@rohitagarwal2958]

i find many video tutorial but your tutorial is best

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@cdlopez29]

thanks for your time'll continue watching your videos

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching, i hope you enjoyed

[@edwinalvarezdelcastillogue9207]

Thank so much for sharing this lesson i am food engineering student

[@jordyaldairhernandezgil3756]

Ahuevo que si chingadamadre

[@tadeoaceves768]

Awesome work man, thank you so much. It works for me to a college proyect.

[@VictorRodriguez-oh8qk]

Very nice video.

[@CADCAMTUTORIALBYMAHTABALAM]

i hope you enjoyed thanks for watching.

[@vyperhma1881]

Thank you so much cold you send me all the project

[@hatueyvillavicencio9437]

the support of the vessel wasn't 90 degree to the front flange of heat exchanger, great video, very informational, thanks a lot.

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i will try to rectify it.

[@Caddtechdesign]

You are making wonderful projects...

[@josemascarua4876]

Awesome. I did it and I am justa a beginner. I am waiting for more

[@parmindersingh6776]

Sir your explanation is very good.

[@asif0401]

I think you missed the partition plate in channel head. This way fluid will not go into the tubes. If we donot add partition plate fluid will come through inlet nozzle and go out of outlet nozzle and will not enter tube side.

[@user-mu6ds2tj9v]

Yes, you are right. There should be a split wall in the head cup.

[@fredyguevara3304]

Remarkable work, thank you very very kindly!!!

[@plaw93]

Your inlet and outlet on the shell cover are not correct. Your fluid will not flow through the tubes but instead will go straight through the cover.

[@CADCAMTUTORIALBYMAHTABALAM]

yes outlet should be beyond the tubes.

[@user-mu6ds2tj9v]

Right. And the top inlet and outlet on the body should be on utmost right and left positions to use all the cells into the body of exchanger.

[@yathishgowda4311]

Good exposure

[@onurtugcular6785]

That is what I need right now thanks for everything

[@luishuacchillodominguez968]

Sorry for my English because it is not perfect but I have to say what amazing job! I wonder if you could draw a belt conveyor transporting some basic product (maybe only a cube), teaching us how to use some tools like basic motion or others that are necessary to move that product. You will me help a lot drawing this piece please. I mean just two shafts with belt and product. I hope you understand my english. Greetings for LatinAmerica, especially from Chiclayo in the north of Peru. Thank you for sharing your job.

[@CADCAMTUTORIALBYMAHTABALAM]

thanks i hope you enjoyed.

[@engineeringsolutions5009]

VERY NICE SIR YOU ARE GREAT !!!

[@CADCAMTUTORIALBYMAHTABALAM]

thanks Ali Azam.

[@sakirberber2048]

perfect. just wonderful

[@asif0401]

BTW big fan of your work. And kudos on such a great channell

[@komodiemo93]

Gracias, estudiante de Ingneieria Quimica.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks & please Share our Videos,

[@HoodieArth]

ya somos dos ajaja

[@sharankadyamada4104]

is'nt the inlet and outlet positioning wrong for cfd analysis purpose?

[@Iamcool9049]

Sir after this assembly can we know how much material is required with cut list ?

[@fajarihsan8723]

Thank you very much, subscribed!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks,

[@petchkannarong9905]

i like your tech

[@cadtutorials1959]

Great

[@Navid_BN]

very good.tnx for tutorial. but one question, Where is your plan and sketch ?plz share whit me. so tnx bro

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching, for sketch goto my facebook page.

[@2010binu]

good job. thanks a lot

[@CADCAMTUTORIALBYMAHTABALAM]

thanks

[@user-ov6qu7iu1n]

Can you make a tutorial of flow simulation for this heaa exchanger

[@jadrabah9826]

thank you so much

[@nadeem8111]

This heat Exchanger has two missing parts Baffle plate in head cover and pressure vent in shell cover

[@prasad10sunku]

This video helped me a lot . Thank you for making such a clear video. I want to ask one thing here, Whenever I draw I wont get that much finished surface. What is the reason?

[@CADCAMTUTORIALBYMAHTABALAM]

you need professional graphics card like Nvidia quadro series or AMD Firepro for real view.

[@prasad10sunku]

I have NVIDEA GEFORCE 2.0 GB graphics.
Is there any settings to get that?
Thank you

[@CADCAMTUTORIALBYMAHTABALAM]

no Nvidia GTX is highly supported for Gaming purpose, you must buy Nvidia Quadro graphics,

[@prasad10sunku]

ok. Thank you

[@user-yu3zt2lo7g]

good job, but I want to know how to make the circle equal

[@Abdullah--vz7yg]

Thank you

[@allanmathis6774]

The heat exchanger is not sitting in the saddles and they are off set. There is no channel so the fluid will go in and out without going through the tubes. the tubes around the center lines are not correct.

[@user-md5yb8hz4h]

You don't have to make mirror twice. just create circular pattern

[@CADCAMTUTORIALBYMAHTABALAM]

yes i can make circular pattern also instead of mirror. i thinks its better way.

[@danielg.8605]

well done what is your solidworks version and your pc graphics card size

[@CADCAMTUTORIALBYMAHTABALAM]

thanks, SW 2014, Nvidia quadro K1100, 2 GB

[@ShioChannel]

Hi, can you make a tutorial to show how to draw distillation column for chemical process?

[@MINHAZAHMED-ct2ii]

thanks

[@mohmanna2833]

thnks so much but in tube part i wanna make u tube ( so connect it) can you help me on this ?

[@diyanahzainudin4357]

i am unable to get the view at 24.11mins. how do get that view?

[@CADCAMTUTORIALBYMAHTABALAM]

it's fine you can see all the selections here.

[@atif072]

This geometry will be acceptable for CFD simulations?

[@CADCAMTUTORIALBYMAHTABALAM]

yes

[@atif072]

Thanks,

[@vishalk3544]

Sir it is helical baffles?

[@akhilraj6644]

Do you have a solidwork file of the heat exchanger made in the video??

[@superdiegoayala]

Me sale constantemente que no se encuentran caras asociadas con el item, ayuda por favor

[@reidibrahim7176]

Hi Gents, I need your help, I am trying to get this SolidWorks Pipe Routing Training, is there any specific name for it other than Pipe Routing, any institute in India you know provide this training for Pipe Routing? so many institutes have full Solidworks which I am not interested in I need only Piping, Vessels and Flow Simulation, Please any advice, thanks.

[@CADCAMTUTORIALBYMAHTABALAM]

Try Solidtrainer in New Mumbai they are the professional Solidworks trainer,

[@reidibrahim7176]

Thanks.

[@hectorivanriosdiaz2835]

Hi you can explain me how use the flow simulation in this? I can't pleas help me

[@diyanahzainudin4357]

hi can you do a video on plate type heat exchanger

[@CADCAMTUTORIALBYMAHTABALAM]

ok let me study .

[@imhariaosoria]

Great tutorial. Are you able to share this file?

[@cenapbaba]

14:45 distance at the center is not same with other circles

[@nima3030]

Amazing man

[@fatihball6923]

Is it evaporator?

[@alwaleedmohammed5134]

What’s name of this heat exchanger?

[@ankitchauhan4221]

At 28.50 min , what is geometry pattern?? Sir

[@idwandifedori3786]

Do you make this for autodesk inventor?

[@CADCAMTUTORIALBYMAHTABALAM]

i will try in Autodesk wait for few weeks,

[@rohitbisht2944]

Please give time of each component drawn

[@metehanaktas4558]

This iş the hardest part of this wuristtol

[@james_miller007]

Hello sir if possible could you share the file??

[@saadalam5345]

Can you please share all the drawings of individual components separately in pdf of jpeg format??

[@CADCAMTUTORIALBYMAHTABALAM]

ok i will try.

[@farhantanvir362]

can anybody share the cad file? I tried but faced some problems

[@fathulwahab7534]

Gan minta file mentahnya. Mau simulasi.

[@EmmHammad]

send cad file plz

[@GarretKrampe]

Tedious and slow methods used. Replicate planes. create baffles and extrude all. That took 2 mins and you took 10 mins.

[@lorddarius9390]

Nice English Indian dude xD

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching.

[@user-nx6sx3sf4w]

пизда, 10 минут послушал, кровь из ушей пошла, ну и в целом кино так себе, куча косяков, и не используется куча полезных вещей таких как- заполнение по образцу и др.

[@diegosopoderoso]

your design are so basic! the manufacturing is more detailed than you show in the video, in manufacturing que make ensambly not a singel part

[@CADCAMTUTORIALBYMAHTABALAM]

i am trying to make all the assemblies and details of the parts in coming videos due to time i skip some parts like nut bolt , washer etc..

[@diegosopoderoso]

yes but you make a good works, the cover are made by pushing and welded but you have very good works

[@CADCAMTUTORIALBYMAHTABALAM]

thanks for watching.

[@MyH2B]

thank you so much

[@AlvessSavio]

thanks