100%. And these new honda engines are even blowing head gaskets in STOCK form. I'm from NY where street racers pull 300hp out of them all motor and 500hp boosted all day on the stock engine and never heard of people blowing head gaskets on them. Not saying they won't blow if pushed but these new ones are blowing bone stock in people's dailys.
@@FirstnameLastname-pe5ibthe 1.5L maybe. The k20c1 in the type r has zero problems. There’s one making 712whp on the stock bottom end Hundreds of them are in the 500-600whp range on stock trans, clutch, engine and are dailied with zero problems
I’m basically running this set up with an A2 head but I never got the chance to get it tuned and now I have a supercharger so it’s cool to see what it would’ve made
@@thebeastqc299 dc sports 4-2-1 but I believe when installing any K24 into an Rsx you might have the exhaust hit the swaybar because the engine sits higher
Hey Nick, thank you for what you do in Sharing these videos. I have a k24z7 that I will swap into my 91 isuzu pickup truck. By any chance what exactly did you mean by some slight modifications to the k20z3 cylinder head by welding?what do you have to do to make it work? Do you have something that you came out with like an instructions guide or something that shows exactly what to do so someone like me can have it done? 😁😁😁 I'm in Hawaii thanks again 🤙🤙🤙🤙🤙
There is no good vid on youtube showing throttle body spacer gains (or lack of) on dyno. If you could share your experience it would be greatly appreciated!
have you ever had issues running the 72mm KTuned TB with the Hondata Flashpro? When I inquired about the TB KTuned said they recommend using a standalone ecu if I wanna run the TB cause with a flashed OEM ecu it can have issues... Since you tune a lot of K20/24's, have you seen issues with this? you mentioned there are headers out there that will make more power than the KTuned, are you talking the megadollar headers like ASP and similar? or is there a mere mortal priced header that perform better? I was under the impression that all $400ish (USD sorry don't know Canadian pricing) were all copies of the KTuned...?
Does anyone know if there any proper guide online about how to make this swap work? I've seen various vague forum posts but no-one really documenting it fully (but maybe i'm looking in the wrong place). I'm very curious for my K24Z3 accord euro, should be possible.
I see you mentioned the DC 2.2 cams, are those worth it over the DC DICs? I browsed through your videos and hadn't really seen you talk about those two at the same time.
Are you located anywhere near ohio? I'm looking for a tune on my 8th gen si. It's currently on a base map for th rdx injectors but I'd like it done correctly.
❤ Honda seriously needs to bring back the k series engines. This little vacuum cleaner sounding 4 cylinders aren't it.
So true, the new K20c motors sound terrible
K20C is nothing as comapred to these older K-series especially when they are boosted
100%. And these new honda engines are even blowing head gaskets in STOCK form. I'm from NY where street racers pull 300hp out of them all motor and 500hp boosted all day on the stock engine and never heard of people blowing head gaskets on them. Not saying they won't blow if pushed but these new ones are blowing bone stock in people's dailys.
@@FirstnameLastname-pe5ibthe 1.5L maybe. The k20c1 in the type r has zero problems. There’s one making 712whp on the stock bottom end
Hundreds of them are in the 500-600whp range on stock trans, clutch, engine and are dailied with zero problems
@@walahmelons5504 They're still ugly, gay & sound like vacuum cleaners.
My friend in his 9th gen FG4 runs this exact setup making 250whp on E85. Had a pretty good race against my 222whp DC5 RSX.
I’d love to find more info on the Z3 head swap on the 9th Gen. Been looking into swapping mine
very clean car. Im almost done my build nick and i will be contacting you again! thanks for sharing!
Thanks Nick, 202 hp with our 9th gen from your tuning Hondata, exhaust/CAI/Downpipe. Next step is head swap RBC manifold and cams.
Great video Nick. surprised me how much power this setup could make
The Honda Civic si sounds good
Made some damn good power . Keep them coming . Thanks
Every pull I wish I had a 8th gen head on my 9th gen 😭
Glad to see you posting
I’m basically running this set up with an A2 head but I never got the chance to get it tuned and now I have a supercharger so it’s cool to see what it would’ve made
What mods did you need to use the a2 head on the z7?
@@younome1845 use a a2 headgasket and k24 headbolts.
What headers did u use and did you have to modify it ?
@@thebeastqc299 dc sports 4-2-1 but I believe when installing any K24 into an Rsx you might have the exhaust hit the swaybar because the engine sits higher
What has to be welded/ground down on the head for the swap?
One of the oil galleries on the block so that it doesn’t leak
Hey Nick, thank you for what you do in Sharing these videos. I have a k24z7 that I will swap into my 91 isuzu pickup truck. By any chance what exactly did you mean by some slight modifications to the k20z3 cylinder head by welding?what do you have to do to make it work? Do you have something that you came out with like an instructions guide or something that shows exactly what to do so someone like me can have it done? 😁😁😁 I'm in Hawaii thanks again 🤙🤙🤙🤙🤙
my dream build❤
so far i only have short ram intake and invidia exhaust.
There is no good vid on youtube showing throttle body spacer gains (or lack of) on dyno. If you could share your experience it would be greatly appreciated!
How much would a headswap cost. Thinking of doing this to my fg4 one day with cams. Maybe throw in a small turbo if im dumb enough.
Probably as much as a turbo kit tbh thats labor parts etc
sounds amazing
Stock fuel pump doing work!
it needs that oil pump man its begging to rev higherrrr
i got an rrc oil pump off an fd2 i hope it fits a k24z7 like the type s pumps
Hey Nick great video , can you Share your list to be able to make the swap🙏
Porsche! Porsche! Porsche!
Hey nick did you do remote tune ? Doctronic ecu?
have you ever had issues running the 72mm KTuned TB with the Hondata Flashpro? When I inquired about the TB KTuned said they recommend using a standalone ecu if I wanna run the TB cause with a flashed OEM ecu it can have issues... Since you tune a lot of K20/24's, have you seen issues with this?
you mentioned there are headers out there that will make more power than the KTuned, are you talking the megadollar headers like ASP and similar? or is there a mere mortal priced header that perform better? I was under the impression that all $400ish (USD sorry don't know Canadian pricing) were all copies of the KTuned...?
Looking for a MR2 & Porsche shells to send to Nick!!!! For some K SWAPs
Wishful thinking! 🤑💫🙌🏽
What better headers were you talking about?
I want to know too
Is the bigger throttle body really necessary?
Does anyone know if there any proper guide online about how to make this swap work? I've seen various vague forum posts but no-one really documenting it fully (but maybe i'm looking in the wrong place). I'm very curious for my K24Z3 accord euro, should be possible.
It's great to see another tuning video! Seems like a lot of work to get the Z3 head on the Z7 block. It would be easier to swap a K24A engine?
Crank sensors between the RBB motors and the R40 motors are incompatible. It would be alot more work.
Z3 headswap isn’t hard there’s guides out there
how hard was doing the head swap? My 9th gen’s motor blew so i’m thinking about doing something like this.
240hp that can smoke a wrx already LOL
All them mods on stock engine mounts is crazy let’s start der lol
I see you mentioned the DC 2.2 cams, are those worth it over the DC DICs? I browsed through your videos and hadn't really seen you talk about those two at the same time.
is this on pump gas? what fuel is it tuned on?
If The owner swaps in the stock k24z7 intake cam and vtc it would get that tq back.
Would the k20a2 work?
Luv it
Any one have dyno the skunk2 ultra camshaft k24z7
Nope but I have a built ported head and camshafts if you want to buy them. I decided not to build mine.
You kept saying "full bolt ons".... Meaning what?
What head gasket you go with?
OEM z7
Are you located anywhere near ohio? I'm looking for a tune on my 8th gen si. It's currently on a base map for th rdx injectors but I'd like it done correctly.
Toronto Ontario
Where is Nick from?
Ontario is think
First 🤟
Tough sedan