⚠️ATTENTION⚠️ FOR THE SECOND TRICK WITH THE EXHALE VALVE YOU HAVE ALSO TO REMOVE ONE MORE RUBBER PART FROM THE INSIDE, YOU CAN SEE WHAT RUBBER PARTS MUST BE REMOVED : ibb.co/QMVb4BQ
S.T.A.L.K.E.R. is the first thing that made me consider cosplaying. Not Animé, not Marvel, even though I enjoy both. I just started working on my own Duty uniform and lo and behold, every stalkers favourite channel starts a series on it. You're just the best!
5:38 - 5:48 Good approach, but the asbestos filter is still open next to the inhale valve. I would recommend that you block it by tracing the diameter of the filter thread on some thick cardboard. Asbestos can't get in or out.
Ya know a little thing say that carpet tape can give the gas mask a good look if used correctly and the PDF gas mask is not in the game but the dead look of it gives you that stalker feeling. Thats all good vid btw.
@@RobertCBRN If you stumble across me in the Zone and get some lucky shots, you can pry it off my corpse. Otherwise it stays right here on my face where it belongs.
I know this video is years old, but as a newcomer to the zone, I ended up buying a Czech OM90 :) great video, even if you don't do STALKER related vids anymore!
m40s are wildly accessible for westerners. they are surplus at this point with the introduction of the M50, and are everywhere on ebay and American surplus stores.
on 6:20 you show this mask, and yes it does say that it is approved for airsoft/paintball, but those are fake and misleading. The lenses break very easily which is a huge shame. and if you absolutely want to do airsoft with real gas masks, then it is possible to buy airsoft approved lenses on ebay and such, but that whole procces in it self basically destroys the mask for it's original purpose. Great video as allways :D
The Russian PMK-3 actually comes with rather thick and sturdy outsert lenses if you get it with the entire kit. It's also rather cheap compared to other masks out there, but the connection is a proprietary bayonet plug, which needs an adapter to work with standard STANAG 40mm cartridges. I found one for around 40-50 dollars, which includes the whole kit.
I have a drager m65 mask its used by the german army, it looks exactly like the sm-90 i got a few for 15 bucks a piece. They are super comfortable and high quality
The romanian M74/85 is a direct copy of the Drager M65. Join my discord and you can sell stuff there if you want and there is also a discord server and facebook page dedicated to selling gas masks.
i found the m40 gas mask on amazon its called ZYC Full Face Gas Mask Military Reality CS Field Protective Helmet Commando Masque A GAZ Respirator Mascara De Gas Militar,Black
idea to use the pbf gas mask but without the filters and keep it looking like the filters were inside ? because i have one but of course with old soviet filters i don't wank to take the risk to use them
@@RobertCBRN I tried with some wires inside the mask which were holding the caps, it works but doesn't always look perfect. By the way I found those 3d printed models for eo-19e filters: www.thingiverse.com/thing:4266255 , now i just need to find where i could print them.
Great. I hope you can become a member of your channel. Of course I also know the collaboration of Pripyat Hawk well. ー Ah, my Japanese friend knows a lot of gas masks.
Question about the pbf kit, you stated that they can contain asbestos is it the filters themselves that contain it or the mask itself? Im seeing kits with the filters that are in plastic bags sealed, only wondering for a safer option. Cannot seem to figure out the the 3d printer ones lol.
Yeah, I just watched couple of videos about gasmask today, and found out that with a good filter even a GP-5 can function as good as an S10 (at least in terms of protection).
I had a lot of issues with the GP-5's sizing and my ears, so I opted for a GP-7 and it fits perfectly while also fitting the theme. Is this a good call, or not? Lore-wise.
Lore wise all soviet masks make sense , however i would like to point out that recently in Ukraine we started producing our own gp7 (looks alot like the.pmk , basically a licensed copy)
Ok so idk how but I got an SM 90 from my local surpuls pretty cheap and yes I checked everything on it and to my surprise it s ans original onenew out of the box
You mentioned it a few times but I’m gonna expand. Soviet filters are a no no. Most of them have asbestos, and it’s not worth the risk, for most masks running the hose into the bag will work, if not get a GOST to NATO adapter and use a modern nato filter with a filter sock. :)
@@RobertCBRN I make adapters so my stuff is functional because I’m also one of those crazy people :) I haven’t tried the Etsy/eBays ones but they’re similar
Home made adaptors are not good, only for radioactive particles, but if any chemical agents are used, you have no guarantee that they are safe to use. Get any mask for cosplay and don t complicate your process with adaptors and stuff, but for ppe and life threatening situation get something different that will be stored in a dry and dark place.
I really need to find out where i can get a GP4 for my S.T.A.L.K.E.R. costume if i want to do some full face mask shots. Do you have any idea on which size i need according to my heads measurements?
One of my tips is that you shouldnt try and copy some character if you dont have money or well to be more precise you really cant since the gear and most importantly the masks are a mishmash of random masks that only exist in the game world. Also why cant i like the video?
⚠️ATTENTION⚠️
FOR THE SECOND TRICK WITH THE EXHALE VALVE YOU HAVE ALSO TO REMOVE ONE MORE RUBBER PART FROM THE INSIDE, YOU CAN SEE WHAT RUBBER PARTS MUST BE REMOVED : ibb.co/QMVb4BQ
Would removing these valves damage the mask? Would it be possible to put them back in?
No, if you are careful, and yes you can put them back but you need patience
You can also buy a new russian filter or cover the inhale valve with a p 3 filter wich you can cut out to make it fit or just use a new filter
When you start your video with a Metro soundtrack... blyaattttt
S.T.A.L.K.E.R. is the first thing that made me consider cosplaying. Not Animé, not Marvel, even though I enjoy both. I just started working on my own Duty uniform and lo and behold, every stalkers favourite channel starts a series on it. You're just the best!
Glad to hear that and thank you!
STALKER Experience is the new Sidorovich of the zone 8)
well he isnt an asshole like sidrovich thats for sure
The good thing with the Soviet latex gas masks is that you can swap the inhale and exhale system.
5:38 - 5:48 Good approach, but the asbestos filter is still open next to the inhale valve. I would recommend that you block it by tracing the diameter of the filter thread on some thick cardboard. Asbestos can't get in or out.
The GP-5 appears in the game on Snorks as i remember
It's a combination of a GP5 and GP4
Oh i see now :'D
I think it's also for factions.
If u like the Style of the SM-90, use a german "Dräger M65". They are common and in Germany u get them for 15 €
A way cheaper and more common gas mask for middle-europe people are Czechoslovak and Polish gas masks.
Don't cosplay myself but this was very entertaining and well done. Learned some stuff too.
Ya know a little thing say that carpet tape can give the gas mask a good look if used correctly and the PDF gas mask is not in the game but the dead look of it gives you that stalker feeling. Thats all good vid btw.
Deadass, I got a SM-90 given to me by a friend. Had no idea they were so rare or expensive lmao
Give it to me 🥺🥺🥺
@@RobertCBRN If you stumble across me in the Zone and get some lucky shots, you can pry it off my corpse. Otherwise it stays right here on my face where it belongs.
Ngl you selling it?
@@RobertCBRN Maybe. It's hard to part with such a caring gift.
What's your asking price? I may just consider it.
Oh true, it is a gift, what a moron I am
I know this video is years old, but as a newcomer to the zone, I ended up buying a Czech OM90 :) great video, even if you don't do STALKER related vids anymore!
m40s are wildly accessible for westerners. they are surplus at this point with the introduction of the M50, and are everywhere on ebay and American surplus stores.
the classic pbf...aaahh, I love the smell of asbestos
on 6:20 you show this mask, and yes it does say that it is approved for airsoft/paintball, but those are fake and misleading. The lenses break very easily which is a huge shame. and if you absolutely want to do airsoft with real gas masks, then it is possible to buy airsoft approved lenses on ebay and such, but that whole procces in it self basically destroys the mask for it's original purpose.
Great video as allways :D
Interesting fact, here in my country I didn't hear players having peoblems with it, that is why I recomanded it :D
The Russian PMK-3 actually comes with rather thick and sturdy outsert lenses if you get it with the entire kit. It's also rather cheap compared to other masks out there, but the connection is a proprietary bayonet plug, which needs an adapter to work with standard STANAG 40mm cartridges. I found one for around 40-50 dollars, which includes the whole kit.
Wlcome to the Market Artyom (the music is gooood)
I love it too!
I have a drager m65 mask its used by the german army, it looks exactly like the sm-90 i got a few for 15 bucks a piece. They are super comfortable and high quality
The romanian M74/85 is a direct copy of the Drager M65. Join my discord and you can sell stuff there if you want and there is also a discord server and facebook page dedicated to selling gas masks.
2:37 wait a second, monoliths dont wear black masks
FOR THE GP MASK AND ALMOST EVERY MASK YOU ARE GOING TO WEAR CHECK ONLINE IF THE FILTERS CONTAIN ASBESTOS!!!!!!!
Hell yeah, thank you stalker
A great substitute for the SM90 that's almost identical is the Romanian M74, it's on KommandoStore for ~$50 (no shipping)
Very good video ! Thank you a lot !
I don’t suppose you’d do a video on jumpsuits? Recommendations to start as a base/make a sunrise suit for example?
It will be done at some point ;)
i found the m40 gas mask on amazon its called ZYC Full Face Gas Mask Military Reality CS Field Protective Helmet Commando Masque A GAZ Respirator Mascara De Gas Militar,Black
Uhmmm
If for some reason it's not their just search up m40 gas mask and click on the airsoft one
Oh, I know that
Mk
my gp-5 has no issue with fogging
You call it cosplay, I call it tuesday.
О, а вот и повод английский подучить подьехал
I have thought of taking my GP5 filter apart to get rid of the shit inside
4:24 I thought that was the Israeli M15 mask?
its not, it just looks like it
@@saunamajuri ohh alright cool
idea to use the pbf gas mask but without the filters and keep it looking like the filters were inside ? because i have one but of course with old soviet filters i don't wank to take the risk to use them
If you don't really care about the mask, you can glue the black caps
@@RobertCBRN I tried with some wires inside the mask which were holding the caps, it works but doesn't always look perfect.
By the way I found those 3d printed models for eo-19e filters: www.thingiverse.com/thing:4266255
, now i just need to find where i could print them.
Great. I hope you can become a member of your channel. Of course I also know the collaboration of Pripyat Hawk well. ー Ah, my Japanese friend knows a lot of gas masks.
What do you mean by member of the channel? Oh and japanese gas masks are extremly rare!!
@@RobertCBRN Meaning of TH-cam membership. Yeah, my friend almost owns the type of gas mask you have!
Oh I understand now, I figure out the membership stuff but patreon seems easier
@@RobertCBRN OK, I get it. I'm a big fan of your channel.
Good hunting stalker!
Thank you, I highly apreciate it!
Hi, i was wondering what jacket you were wearing for this video? Thanks!
Ct12 gas más: $200
Beside of the sm-90 you can use the german M65. www.asmc.de/bw-schutzmaske-gebraucht
The mask you suggested for airsoft... I doubt it is safe.
What about the gas mask of the military troop?
you can 3d print filters too
I see your not that active anymore, but if you do manage to see this somehow you should really do one for metro sometimes!
Asbestos, the bestos
Wait is he monolith sidrovich? If so thats cool
I clicked so fast!
Thank you, fast!
At 2:43 what Jacket are you wearing?
Romanian army rain coat
I live near a surplus shop that sold old m40s for about 60-90 dollars and gp5s m17s and a mcu2p for around 35$
N i c e
Actually the GP-5 is in the game, at least in Stalker anomaly :)
Stalker anomaly is a standalone mod
@@RobertCBRN oh, my bad :)
Any gasmasks available for a eyeglasses wearer such as myself?
Panoramic gas masks but depends on what eyeglasses you have
@@RobertCBRN I have the big clunky style that gordon freeman wears haha, any specific panoramic gas masks types that you would recommend?
Pfffff AUER 3S or the romanian MC68
@@RobertCBRN Thanks man, good luck with your content, you have my subscription
thank you
Question about the pbf kit, you stated that they can contain asbestos is it the filters themselves that contain it or the mask itself? Im seeing kits with the filters that are in plastic bags sealed, only wondering for a safer option. Cannot seem to figure out the the 3d printer ones lol.
i actually went to a lot of places where you can find gas mask but i didn't find the gp4 (i'm romanian)
In romania we used the MC56 copy of the Gp4 but they are not very common
@@RobertCBRN yea, and also i got a gp5 for like 15 lei with filter (the guy who sold it didn't want it anymore)
Nice
What's up with the filters? Why are they big NO-NOs? (I don't own a useable gasmask YET, so I'm not really imformed about this)
Asbestos
@@RobertCBRN I did some research after your answear and now I see the problem.
All masks are safe, the filters are the problem
Yeah, I just watched couple of videos about gasmask today, and found out that with a good filter even a GP-5 can function as good as an S10 (at least in terms of protection).
@@RobertCBRN That's what I just watched lol
Anyone have a good idea for a jacket for a stalker cosplay?
Nice video, but I always have wanted to land my hands on good prop guns for cosplay, where did you got yours? Where can I and other buy them?
Airsoft, it's the best option in my oppinion. Are you from Europe?
STALKER Experience Yes
Than go and look for what you like on gunfire.pl , there I bought some of my stuff or your local airsoft shops.
It really matters where you live in the country I live gas masks are really cheap and common from gp5 to the rare CT12
I WANT TO KNOW YOUR LOCATION
*Monolith wants to know your location*
I had a lot of issues with the GP-5's sizing and my ears, so I opted for a GP-7 and it fits perfectly while also fitting the theme. Is this a good call, or not? Lore-wise.
Lore wise all soviet masks make sense , however i would like to point out that recently in Ukraine we started producing our own gp7 (looks alot like the.pmk , basically a licensed copy)
Hey what about the PMK-1 Gas mask?
It is mods
Ok so idk how but I got an SM 90 from my local surpuls pretty cheap and yes I checked everything on it and to my surprise it s ans original onenew out of the box
Buy me one too 🥺
I have a M10M from the Czech.
You mentioned it a few times but I’m gonna expand. Soviet filters are a no no. Most of them have asbestos, and it’s not worth the risk, for most masks running the hose into the bag will work, if not get a GOST to NATO adapter and use a modern nato filter with a filter sock. :)
The adapter is useless, for cosplay you can just shove a nato filter, it goes in very well
@@RobertCBRN I make adapters so my stuff is functional because I’m also one of those crazy people :) I haven’t tried the Etsy/eBays ones but they’re similar
Home made adaptors are not good, only for radioactive particles, but if any chemical agents are used, you have no guarantee that they are safe to use. Get any mask for cosplay and don t complicate your process with adaptors and stuff, but for ppe and life threatening situation get something different that will be stored in a dry and dark place.
is the m74 mask aight? my father bought two in romania for dirt cheap
@fps_cosplayer collecting wise, yes
I really need to find out where i can get a GP4 for my S.T.A.L.K.E.R. costume if i want to do some full face mask shots.
Do you have any idea on which size i need according to my heads measurements?
Contact me on instagram, I am selling romanian gp4 copies
E foarte fain simt bun pentru ca sunt si altii sunt fani lui stalker
Cum vad preturile sidorivici face bani
Why not use the filters?
Sorry I don't know much about gas mask filters
Asbestos
Asbestos
Hello comrade
Hello
Would the pmk Soviet mask work
Yes
One of my tips is that you shouldnt try and copy some character if you dont have money or well to be more precise you really cant since the gear and most importantly the masks are a mishmash of random masks that only exist in the game world. Also why cant i like the video?
I don't know... I am working on that
Done!
@@RobertCBRN good
Pmg can be used
all masks can be used, these are just the masks used in the games.
Eu cu 120 lei moldovenești am luat două . 6 €
Why
?
@@RobertCBRN look my nick
if i made stalker, i would put serbian m3 gas mask instead of m40
That one is rare and expensive aswell :(
@@RobertCBRN yes but im not from a country full of capitalist pigs, i can go to serbia every year
@@sergejgajic me too, but they are still rare af (they are still issued in the army) and expensive.
@@RobertCBRN i know but IF I CREATED THE STALKER VIDEOGAME IT would have M3 gas mask not capitalist m40
@@sergejgajic oh, ok
My dad has an m40
Does he sell it? xD
STALKER Experience no he said he’ll keep it because he kept it when he retired from the army
Eh I was joking, very nice of your father, he got a cool souvenir