SO SORRY to hear about your loss! Losing a Father is tough on anyone, hope you have nothing but fond memories of your Father! I just found your channel while researching the LT Wright Pronghorn and you seem to have the exact same taste of fixed blade knives as I do! I bought the Pronghorn in CP-3V with Snakeskin Micarta and it should arrive on Monday! Can't wait to get it! I would like to strongly suggest you check out the Brisa Enzo Trapper Models 95 and 115 in ELMAX! I am strictly a fixed blade guy and my collection is mostly Bushcraft and Survival Knives. I had watched video's and read lot's of reviews on this knife and finally pulled the trigger on the 115, when I first picked it up, I put it back down and ordered the Trapper 95 that very same day! These are the BEST production knives I've ever held in my hands! The fit and finish are on par with Bark River Knives! Thought I would suggest this being your interest are in line with mine in fixed blades. For years, I've heard guys rave about these Brisa Enzo Trappers, but the Elmax knocks it out of the part, hands down the best value in quality production knives and are reasonably priced when compared to other like brands in Elmax! I got the green micarta scales, again, they just blow me away, the grip size is super ergonomic and fits a large cross section of hands! You must check them out, you will not regret it! They are now hands down my favorite of all my knives and I have 3 walls full, LT Wright, TRC, Battle Horse Knives. Winkler, Bradford, Fallkniven, Reiff, WTG, Survive GSO 5.1, and on and on! Ha! For around $200 will get you the 115 and the 95 is about $20-$30 less. The sheaths are VERY high quality! Even Better, being that you are into building knives too, Brisa sells the Trapper 95/115 blades in Elmax for considerably less and you can put you own scales on it and save a few bucks. OK, finally over my introduction and recommendation! I really enjoy your reviews, glad I ran across your channel and you are very knowledgeable, I value you input and opinions on the knives you review! Thank you! John 🔪🔪😁😁🔪🔪
I'm so sorry for your loss hermano. ... You made some wonderful additions to your collection at Blade Show. ... I'm very partial to that beautiful Bob Loveless style drop point hunter. ... I've read all of Jack Carr's novels. The 'Terminal List' is an absolute block buster. ... Those Winkler fighting tomahawks are going to become much sought after and unobtainable. I'm glad you got in on the ground floor with a limited edition. ... Thanks for showing us your new treasures. ... Vaya con Dios, amigo.
@@thecavemanknivesreview.8097 Ps: was able to get some nice axes from China recently (clone of the RMJ) and also a very good copy (OK not nice when they copy the brand) of the Winkler axe... But was less than 100 usd for some A2 steel and axe is really good looking and convex edge. I had to try it at that price. Will post all these axes soon on my channel.
@@thecavemanknivesreview.8097 Yeah, I don't publish tests usually cause not so much time and when I am out and don't take my site up to do vids, but may try to do one to see how it looks. I did not used it for now. Too many stuffs recently and not enough time to test it all... You know what it is... Lol
Hola hermano como estas muy lindo todos los cuchillos pero el acha me volo la cabeza .muchas gracias por mostrar cosas que aca en mi pais no las vere nunca saludos buen video
Lamentó tu pérdida hermano. Mis mejores deseos y bendiciones para ti y los tuyos. I love your collection. Keep it up, glad to watch your vids again.😊🙏⚔️
SO SORRY to hear about your loss! Losing a Father is tough on anyone, hope you have nothing but fond memories of your Father! I just found your channel while researching the LT Wright Pronghorn and you seem to have the exact same taste of fixed blade knives as I do! I bought the Pronghorn in CP-3V with Snakeskin Micarta and it should arrive on Monday! Can't wait to get it! I would like to strongly suggest you check out the Brisa Enzo Trapper Models 95 and 115 in ELMAX! I am strictly a fixed blade guy and my collection is mostly Bushcraft and Survival Knives. I had watched video's and read lot's of reviews on this knife and finally pulled the trigger on the 115, when I first picked it up, I put it back down and ordered the Trapper 95 that very same day! These are the BEST production knives I've ever held in my hands! The fit and finish are on par with Bark River Knives! Thought I would suggest this being your interest are in line with mine in fixed blades. For years, I've heard guys rave about these Brisa Enzo Trappers, but the Elmax knocks it out of the part, hands down the best value in quality production knives and are reasonably priced when compared to other like brands in Elmax! I got the green micarta scales, again, they just blow me away, the grip size is super ergonomic and fits a large cross section of hands! You must check them out, you will not regret it! They are now hands down my favorite of all my knives and I have 3 walls full, LT Wright, TRC, Battle Horse Knives. Winkler, Bradford, Fallkniven, Reiff, WTG, Survive GSO 5.1, and on and on! Ha! For around $200 will get you the 115 and the 95 is about $20-$30 less. The sheaths are VERY high quality! Even Better, being that you are into building knives too, Brisa sells the Trapper 95/115 blades in Elmax for considerably less and you can put you own scales on it and save a few bucks. OK, finally over my introduction and recommendation! I really enjoy your reviews, glad I ran across your channel and you are very knowledgeable, I value you input and opinions on the knives you review! Thank you! John 🔪🔪😁😁🔪🔪
I'm so sorry for your loss hermano. ... You made some wonderful additions to your collection at Blade Show. ... I'm very partial to that beautiful Bob Loveless style drop point hunter. ... I've read all of Jack Carr's novels. The 'Terminal List' is an absolute block buster. ... Those Winkler fighting tomahawks are going to become much sought after and unobtainable. I'm glad you got in on the ground floor with a limited edition. ... Thanks for showing us your new treasures. ... Vaya con Dios, amigo.
Gracias hermano. I'm very happy with the purchases but the winkler is my crown jewel. Very proud to own one of these.
Very beautiful stuff again. Tks for showing. Love the 2 first one! Tks for showing and strength and honor. Sorry for you loss.
Thank you brother.
@@thecavemanknivesreview.8097 Ps: was able to get some nice axes from China recently (clone of the RMJ) and also a very good copy (OK not nice when they copy the brand) of the Winkler axe... But was less than 100 usd for some A2 steel and axe is really good looking and convex edge. I had to try it at that price. Will post all these axes soon on my channel.
@@fkr6051 I'll be looking forward to the test. A2 sounds great and if it is A2 for real have better steel than the original ones.
@@thecavemanknivesreview.8097 Yeah, I don't publish tests usually cause not so much time and when I am out and don't take my site up to do vids, but may try to do one to see how it looks. I did not used it for now. Too many stuffs recently and not enough time to test it all... You know what it is... Lol
Hola hermano como estas muy lindo todos los cuchillos pero el acha me volo la cabeza .muchas gracias por mostrar cosas que aca en mi pais no las vere nunca saludos buen video
Gracias hermano.
I love this guys
Thank you!
Lo siento mucho amigo. Ánimo y fuerza!
Unas piezas preciosas han venido contigo.
Gracias hermano.
Sorry for your loss. Stay strong!
Thank you!
My condolences to you and your family. Thank you for sharing this video
Thanks brother.
I'm sorry brother. The same happened to me with both my parents. Be patient with yourself it takes time to heal. Continue to do what you love.
I appreciate it brother. Sorry to hear about your parents.
It’s good to see you back. Those are some cool knives you picked up. I’m sorry to hear about your father. Stay strong brother.
Thanks brother!
Lamentó tu pérdida hermano. Mis mejores deseos y bendiciones para ti y los tuyos. I love your collection. Keep it up, glad to watch your vids again.😊🙏⚔️
Gracias hermano!
Sorry to hear brother. My condolences.
Thank you!
Sorry for your loss 🙏 for you .
Thank you!
Sorry for your loss… look for strength in the lord and keep moving forward brother
Thank you brother!
To God we belong and to God we will return. I'm sorry for ur loss
Thank you!
Sorry for your loss
Thank you.
Sorry to hear about your Dad. Welcome back though.
Thanks brother!
What was the 3rd one for a blade?
Is a AA forge, Muk in Cru-wear.
Sorry about your father.
Thank you!