Pilot: Christoph H. Model: TopRC "Odyssey" - EDF Power: Jetfan 130 Pro / 16S-10.000mAh Airfield: MFC-Salzburg / Austria / Europe (c) HPS Video Production
I would like to say a special thank you to Peter ( jets unlimited ) who helped me with tips and tricks to build the Odyssey, as well as Pyrowolf and Mario K. Without your help I would not have dared to go over this project. You are great guys !!!!!
Good job! I am probably doing my first flight this weekend on a similar setup, Jetfan 130mm, 16S, 650kv motor, 8800mah. I tried to be careful of weight, but still it comes out 16kg. From the end of the video, it looks like you have quite a bit of down elevator trim with flaps down, and with flaps up the elevators are approximately flush with the h-stab. Is that right?
Hallo. Ich habe auch eine odyssey mit 130 edf. Mit welchem motor fliegst du 16s? Ich habe den tfl 700kv. Doch flieg den mit 14s. 16s kein problem von der Temperatur?
Hallo! Ich habe den Jetfan 130 mit dem TFL 650kv verbaut . Laut Hr. Holzmann von Ejets soll der Unterschied beim Speed nicht sooo groß sein. Dafür hat man halt bisschen längere Flugzeit. Und die Temperatur des Reglers ( YGE 255 ) liegt nur bei ca. 40 - 45 Grad, die Akkus und auch der Motor werden aber schon sehr heiß, da sollte man immer ein wachsames Auge drauf werfen, aber bis jetzt ist immer alles gutgegangen!!
Hallo habe Mal eine Frage zu der Odyssey was für eine Regler und was für Akkus sind das genau.Habe auch eine im Keller stehen noch mit Turbine bin aber am überlegen ob ich das auch um bauen tue.mfg Stephan
Fabulous Peter, I imagine Rainer is ecstatic to see Flying these fans in your big!
Thx Bob 🙏! The EDF version of my C&C Viper will have its maiden soon 😉😎!
@@Jetsunlimited I can hardly wait!!!
Super geflogen 👍 …und was für ein geniales Flugfeld . Gratulation aus München, der Sven🍺
Danke Sven 🙏!
que lindo jet ! se ve realmente muy bueno y de calidad.. ademas vuela super bien
I would like to say a special thank you to Peter ( jets unlimited ) who helped me with tips and tricks to build the Odyssey, as well as Pyrowolf and Mario K. Without your help I would not have dared to go over this project. You are great guys !!!!!
Good job! I am probably doing my first flight this weekend on a similar setup, Jetfan 130mm, 16S, 650kv motor, 8800mah. I tried to be careful of weight, but still it comes out 16kg. From the end of the video, it looks like you have quite a bit of down elevator trim with flaps down, and with flaps up the elevators are approximately flush with the h-stab. Is that right?
yes, thats ok, wish you all the best for maiden 👍
Two thumbs up
Thx 🙏
Incredible edf! Hard to beat a jetfan
Thx 🙏, yes, perfect EDF!
Schöne Geflogen
Hallo. Ich habe auch eine odyssey mit 130 edf. Mit welchem motor fliegst du 16s? Ich habe den tfl 700kv. Doch flieg den mit 14s. 16s kein problem von der Temperatur?
Hallo!
Ich habe den Jetfan 130 mit dem TFL 650kv verbaut . Laut Hr. Holzmann von Ejets soll der Unterschied beim Speed nicht sooo groß sein. Dafür hat man halt bisschen längere Flugzeit. Und die Temperatur des Reglers ( YGE 255 ) liegt nur bei ca. 40 - 45 Grad, die Akkus und auch der Motor werden aber schon sehr heiß, da sollte man immer ein wachsames Auge drauf werfen, aber bis jetzt ist immer alles gutgegangen!!
Vielen Dank für die Antwort. Denke ich bleibe bei den 700er motor mit 14s. Habe zwar nur 3min Flugzeit aber reicht schon. Guten Flug
Hallo habe Mal eine Frage zu der Odyssey was für eine Regler und was für Akkus sind das genau.Habe auch eine im Keller stehen noch mit Turbine bin aber am überlegen ob ich das auch um bauen tue.mfg Stephan
Hi Stephan!
Habe einen YGE 255 Opto Regler verbaut, der mit 16s 10000er Akkus von Red Power unter Strom gesetzt wird.
@@stofferl2000 Hi Danke für die Schnelle Antwort