DAHIL SA MALING TIMING ANG LAKI NA NG EPEKTO SA MAKINA

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ม.ค. 2025

ความคิดเห็น • 50

  • @markypolo364
    @markypolo364 ปีที่แล้ว +2

    Gnyan din po nangyayayari sa motor ko before ko kasi idala sa mekaniko maganda ang menor. Nung inaayos na kasi pinalitan ko block hirap na paandarin kahit anung ayos ko tono co sa carb same result mahirap paandarin. Pag napaandar mo nmn paiba iba ang menor tapos sobrang init nang block .. yun pala pag check ko nang timing hindi timing mga tatlo or dalawang ngipin ang hndi ayos bumili na lang ako sa shoppee nang mga gamit pang bukas at ako n lang nag timing . Ayos na isang padyak lang andar n sya ... Ang laki pala nang epekto nang maling timing sa motor, although aandar namn ang motor kaso yon nga ang pangit nang menor

  • @jaybief68
    @jaybief68 2 หลายเดือนก่อน +1

    hindi n po ba inadjust sa tappet?

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 หลายเดือนก่อน

      @@jaybief68 ..inadjust din sir..

  • @seamansisidvlog3755
    @seamansisidvlog3755 7 หลายเดือนก่อน +1

    Idol tanong kulang bakit may dumadaan na langis dito sa magnito ng wire... cb125 ung motor ko natural lng bato salamat poh sa sagut.

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  7 หลายเดือนก่อน

      Hindi sir..matigas na ung rubber ng stator na nakalapat sa crankcase cover..need mo na palitan ng stator assembly

  • @bubuyog2350
    @bubuyog2350 2 ปีที่แล้ว +1

    idol.. anung opinyon mo sa pag tune up ng tmx 155.? ang standard db ay 0.008. mas mainam ba na standard padin ang tune up or babaan na ang clearance??

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      0.05 mm sir ang clearance ng tmx155

    • @bubuyog2350
      @bubuyog2350 2 ปีที่แล้ว

      @@KUYAJESMOTO31 hindi ba tukod un sir o mag iinit makina?

    • @bubuyog2350
      @bubuyog2350 2 ปีที่แล้ว

      @@KUYAJESMOTO31 naka lagay kasi sa manual sir ng tmx 155 valve cleance is .008... goods ba sir na gawin kunng .005?

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      Sir magkaiba po ung .005 sa .05mm sobrang liit na ng .005 at .008..0.05mm po ang standard both exhaust and intake..

  • @JaysonAdante
    @JaysonAdante 11 หลายเดือนก่อน +1

    Boss Yung waiv alpha 110 ko po . Kahapon kc pina retrade ko Yung lalagyan ng sparkplug,Bali binaklas nya po Yung head para ma trade ng maayos. Ok na sana KASO Wala ng menor Yung motor ko at mahirap narin paandarin.

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  11 หลายเดือนก่อน +1

      mali po ang timing sir..

  • @conradooliva870
    @conradooliva870 2 ปีที่แล้ว +1

    idol kuya jes tanong lang poh ano po kaya problema cb 125 minsan natakbo ako bigla nalang nag iiba tonog tambotso tratel mo ayaw humatak maganda pagpinilit patay motor pag namatay start ayaw, kick lusot wala hase .pahinga konte tajaktajak aandar na ano kaya idol prablem non.?

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      possible sir madami ng carbon deposit sa chamber..need na matop ovehaul..or tukod po ang valve clearance

    • @conradooliva870
      @conradooliva870 2 ปีที่แล้ว +1

      Salamat sa sagot idol.nako malaking gastusan pag nagkataon idol

  • @marvinarsenal
    @marvinarsenal ปีที่แล้ว +1

    Sir ganyan din po sakin ...baba taas menor...tapos hirap po mabuhay ..tapos lakas ng backfire

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  ปีที่แล้ว

      sir pacheck muna ng pulser..minsan po pulser ang problema pag naka timing na..lalo pag mainit..nakadyot kadyot ang takbo

    • @marvinarsenal
      @marvinarsenal ปีที่แล้ว

      @@KUYAJESMOTO31 sir sinundan ko ung vedeo muh binaklas ko ung timing naitiming ko naman ang problema pag tadyak ..tumatalon na ang kadena parang lalo lumaki ang sira 🤣🤣🤣

  • @anthonyzipninerandrada
    @anthonyzipninerandrada 10 หลายเดือนก่อน +1

    Boss mali timing ng motor ko, hirap paandarin pero hndi ko na pinilit, may sira na po ba yun sa loob?

  • @renecagas5623
    @renecagas5623 2 ปีที่แล้ว +1

    Anu po ang mang yayari sa motor pag wala po sa timing sir

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      palyado po..malagapak anh motor..panget ang menor at namamatay

    • @renecagas5623
      @renecagas5623 ปีที่แล้ว

      Thanks po sir sa idea..

    • @mclaren3864
      @mclaren3864 ปีที่แล้ว

      ​@@KUYAJESMOTO31nakakasira po ba ng makina pag wala sa timing

  • @julireydario6077
    @julireydario6077 2 ปีที่แล้ว +1

    Good day sir , bakit kaya hirap etiming carb ko . Stock naman po lahat , nag plug reading po ako parang may puti tsaka kulay kalawang . Naka ilang luwag na ako sa tonohan nya ganun parin

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      Sir check mo valve clearance baka mali ang adjust

    • @julireydario6077
      @julireydario6077 2 ปีที่แล้ว

      @@KUYAJESMOTO31 ano po ba magandang clearance sir ? Kc po ung alpha ko pag kahit may manipis na clearance lakas ng lagitil kaya ginawa ko wala ng clearance . Yung saktong dikit lang po

    • @julireydario6077
      @julireydario6077 2 ปีที่แล้ว +1

      @@KUYAJESMOTO31 kahit nga po ngayon walang clearance malagitik parin ano kaya problema ng alpha ko sir m

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      @@julireydario6077 sir kailangan standard clearance..check spark plug..dpat 8k km or 1year palit na spark plug..then air filter baka barado..then pag ok na yan lahat..check mo na primary coil ng stator

    • @julireydario6077
      @julireydario6077 2 ปีที่แล้ว

      Mejo bago naman po stator ko sir pati spark plug .

  • @izanrichardgenoso4525
    @izanrichardgenoso4525 2 ปีที่แล้ว +1

    First sir! 🙌

  • @raymondcatilo3023
    @raymondcatilo3023 2 ปีที่แล้ว +1

    idol ok lng ba sa alpha naten prang humahalinghing xa? ang alam ko kasi pag ganon paliting na ang cluth lining nia..

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      pwede sir clutch lining..pero check muna ang idle gear..sakit ni alpha yan

    • @raymondcatilo3023
      @raymondcatilo3023 2 ปีที่แล้ว

      @@KUYAJESMOTO31 ok idol salamat sa info godbless

  • @moonbandnovio721
    @moonbandnovio721 2 ปีที่แล้ว +1

    Sir tanung lang normal lang ba na may parang gatas sa oil deep stick ng tmx 125,,

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว +1

      wag po masyado higpitan sir ang pagkkasara naiipit po ang o-ring..then iwasan nio po i pressure water sa may dipstick

  • @JaysonAdante
    @JaysonAdante 11 หลายเดือนก่อน +1

    Sir ano kaya problema nito

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  11 หลายเดือนก่อน +1

      Wala po sa timing sir..dapat naka timing po ang timing gear sa markings .

  • @WedzfarNuruddin
    @WedzfarNuruddin 9 หลายเดือนก่อน +1

    bakit akin boss na wawala sa timing cb125 din akin

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  9 หลายเดือนก่อน

      Check ka sir ng roller baka maluwag na..baka tumatalon na chain ng motor mo..

  • @joelbaring4057
    @joelbaring4057 2 ปีที่แล้ว +1

    hehehe bakit di nyo po pinakita ung T mark

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  2 ปีที่แล้ว

      Hindi po ba nakita??sorry po🤣🤣🤣

    • @joelbaring4057
      @joelbaring4057 2 ปีที่แล้ว

      @@KUYAJESMOTO31 hindi eh gusto ko sana makita pati ung pag adjust

  • @backyardgamefowl6982
    @backyardgamefowl6982 หลายเดือนก่อน +1

    idol may fb kaba pwwde ichat

    • @KUYAJESMOTO31
      @KUYAJESMOTO31  หลายเดือนก่อน

      meron sir kuyajes moto din