Jesus dude. That's the most comprehensively accurate video ever made on not only the governor gear, but the entire thought process and intended purpose of every factory parts manual and instruction set ever made. Well done!
I have absolutely NO need to learn how to fix a mower but I have been binge watching these videos for like 2 days now because they are so great, I absolutely love this
yeah taryl delete that part lol next thing you know dodge will be advertising the all new hemi with the reinforced all new stronger then steel crank and the all new and improved rubber band timing chain LOL
Ok. I missed you guys at the GIE expo. I'm a truckdriver that works on mowers on the side. I also have the Ariens booth in my trailer right now. Yes, I picked up Saturday after the show. I also saw while loading. They were loading the dumpster with cordless/battery operated push mowers that the Chinese area destroyed so know one could use. Instead of taking it back. Well, it looked like EZ-WORKS junk.
You'd think that'd be Slippers since everyone in town looks like him. All the ladies say, "Look at that naked man running through the car warsh . . . I must have him!"
Classic Taryl's Fixes All video my friend. I truly enjoy the thought you put into each episode. You keep us entertained and informed, stole that from reading the Comments section Brian Philbrook ! I can't wait until you top 100,000 Subscribers ! "WOOO, governor gear replacement, bucket engine, WOOO !" And There's Your Dinner !!!
Anyone know if the two gears for the oil pump(Gerotor Gears) have to be lined up a certain way with each other when reassembling? My governor was in 100 pieces all throughout the engine, i had to take out the oil pump to get all the pieces. I noticed each gear has a mark that looks like a timing mark but can't see why it would have to be lined up?? The part # that contains the gears is 2039302S if you want to see a picture. Thanks!!
Thanks for the video. I started working on lawn mowers this summer. And I recently picked up the exact mower with the same problem. So it will be fixed now thanks to your video.
I have this jonsered st2261e snowblower about a year old no spark anything you could tell me to do or try anyway I think your TH-cam is great thanks Dave
Nah. They're bad. This would be a much better channel if he ditched the teeth and wig and "just the facts, man." His actual content is very good, every time.
I have 222 horse Kohler 0 ton mower. Both of them have no adjustment they run full throttle all the time. Should I replace the governor since I’ve been running these mowers for five or six years full throttle.
so we did everything like both videos said to do now that everything is reassembled when we turn it over it doesn't start its getting a spark we also compression tested it it has a new carburetor on it as well as a new gas vacuum diaphragm. when we spray a tad of starting fluid in it it will start up we don't know where to go from there
Grass rat with a junky mower here. Enjoyed your gid. Have a bad Cv12.5. What is a fair overhaul bid? Like to try it myself.( Work on airplane engines),but on dialysis right now and am limited. Have heard parts are scarce. Could you suggest a source? Thanks! Keep ' em coming!
My briggs 5hp comercial engine just working. I opened it up and found the crankshaft dipper bent and broken with the govenor gear striped. Know idea what happened. Do you guys have any input
I looked for that "POS-540" part number for this engine and I couldn't find it......Can you elaborate on any acronyms in this part number to make it easier to look up?? ha!!!!
sewing1243 generally, your engine will run very, very fast. In case you don’t know, the governor is what balances out the throttle input while the engine is operating. That “pin” that he showed going up and down pushes the governor shaft. That shaft goes from inside the engine to the outside. On the outside it connects to the throttle assembly. When the engine slows down, the pin goes back down. This speed up/slow down action is occurring very fast. Anyway, that is probably more information than you wanted. There are a couple of other reasons why an engine would “run away”. But, the most important thing to do is to immediately shut the engine down and investigate.
I thought the K in Kohler stood for Krap. Hey Taryl, what took out the gear in the first place? Are they made in the factory in Kohler WI. where they make toilets? Hmm, could be...bucket of what?
This is a unrelated question I have a 52” ex mark walk behind turf tracer with a Koehler engine efi it came to me with fuel leaking out the head so naturally I changed the fuel injector still leaks fuel out exhaust and plugs still get wet so I changed the high pressure fuel pump still same thing and I changed the computer out and changed out the other fuel pump still no change......do u have any advice or can u help
Hi I need your support I have Kohler engine i changed seal pan but i have groove around pto shaft leak oil after assembled new seal What can i do I learnt alot of things from kindly your answer Thanks
So Mustie1 was trying to figure out his free Lamborghini and I mentioned that Taryl did a custom Roof Palomino if he couldn't figure it out.... Gotta love em both 😍
Briggs Vanguard i love them engines ,easy to work on ,not much to do with them but change oil and maintenance. never had Honda or Kawasaki engine on mower , ATV and they was great engines
Good stuff. Still waiting for that Sasquatch episode though. Come on, do it for The Sacred Cowtipper. You can even have Squatchie fight that bear and then team up and go after that crook character that rips people off.
I got to say this is the most cringy channel I have seen on youtube... Ridiculous... yet I love it and watch every one. LOL Its like those silly dumb movies that actually have a good message behind it and at the end you actually learned. Reminds me of Three stooges, Threes Company etc type comedy.
Hey Taryl, just got done working on Troybilt self propelled mower with a Briggs and stratton 11p902-2693-b1 engine. Thought it might be a good how to video on how to change the timing gear. For whatever reason they originally had a cheap plastic gear. I'm personally still having issues with it. I've put the gear and the cam in correctly, adjusted the governor arm with the throttle open, and I believe I have all the springs on correctly. It's running again but its running slowly and vibrating like crazy. Any ideas on what the problem could be? Oh I also put on a brand new carb since the old one seized up completely
and so god said, make it so, and then on the 8th day, EZ works was created in his mirror image. and thus, evil was created to bring balance to the universe,
mitzvah golem - Lol! Yep, Lawn Boy is now ‘Lawn Folks’ just like Ace Hardware used to be ‘the place with the helpful hardware man’ but now the commercials say ‘Ace is the place with the helpful hardware folks’. 🤣🤣
Have you heard a riding mower engine that keeps breaking starters ? I had one last year that I would say I put at least 6 starters on it through the whole mowing season then I just said the hell with it and scrapped the thing
Cool so true, plastic crankshafts, plastic bushings and plastic nuts. Just think how easy that will be to fix. No torque-ing and if you strip a nut well don't worry they are cheap, and inexpensive. LOL!
Mustie 1 "ALERT" Mustie 1 lastest video shows "Mustie 1 " using his Taryl apparel coffee cup as a gasoline container as he drains a bowl on honday gas engine
Jesus dude. That's the most comprehensively accurate video ever made on not only the governor gear, but the entire thought process and intended purpose of every factory parts manual and instruction set ever made. Well done!
I have absolutely NO need to learn how to fix a mower but I have been binge watching these videos for like 2 days now because they are so great, I absolutely love this
I hope you guys never get sick of doing these vids. Definitely one of a kind!!!🤣🤣🤣😎
how do you get the gear off?
I couldn't stop laughing. Ain't it the truth. The plastic crankshaft was hilarious. Don't give them any new ideas.
Ford tried a plastic block on the 2.3L. It didn't work! Strange??
I heard of ceramic blocks years ago too.
yeah taryl delete that part lol next thing you know dodge will be advertising the all new hemi with the reinforced all new stronger then steel crank and the all new and improved rubber band timing chain LOL
The sad part is it's true. Just buy a modern MTD. Garunteed to be the worst mower you ever own.
@@R.N.GPerformance LoL yeah and Chrysler would be the manufacturer to do something like that too which is the really sad part of it.
Man I love these videos. Entertaining and instructional
i love and appreciate the hard work you guys do with comedy in the grass rats world. Great work and keep those great how to's coming! Thanks!
Ok. I missed you guys at the GIE expo. I'm a truckdriver that works on mowers on the side. I also have the Ariens booth in my trailer right now. Yes, I picked up Saturday after the show. I also saw while loading. They were loading the dumpster with cordless/battery operated push mowers that the Chinese area destroyed so know one could use. Instead of taking it back. Well, it looked like EZ-WORKS junk.
Love Taryl's videos
What was the symptom?
I have no idea what I just watched,I can’t stop staring at the dental work!
This Channel is in my top 3 on TH-cam!!! There's your dinner!!!
I must speak for the whole town , STOP RUNNING NAKED THROUGH THE CAR WASH !! other then that keep up the good work !
You'd think that'd be Slippers since everyone in town looks like him. All the ladies say, "Look at that naked man running through the car warsh . . . I must have him!"
Was this motor over reving due to the governor gear problem?
Classic Taryl's Fixes All video my friend. I truly enjoy the thought you put into each episode. You keep us entertained and informed, stole that from reading the Comments section Brian Philbrook ! I can't wait until you top 100,000 Subscribers ! "WOOO, governor gear replacement, bucket engine, WOOO !" And There's Your Dinner !!!
The bonus 'fart montage' footage at the end...PRICELESS! LoL!
Great video ....how do you get the gear back off without breaking it?
Hey can ya do a vid on the courage twin vertical compression release replacement ? thanks
Better than Netflix's
Poo 5000 ,,,,,, I love it. Thanks for the chuckles taryl.
Hey Taryl, could you do a in-depth video on a Briggs opposed twin? Also hope to see your opposed twin mini bike.
Anyone know if the two gears for the oil pump(Gerotor Gears) have to be lined up a certain way with each other when reassembling? My governor was in 100 pieces all throughout the engine, i had to take out the oil pump to get all the pieces. I noticed each gear has a mark that looks like a timing mark but can't see why it would have to be lined up?? The part # that contains the gears is 2039302S if you want to see a picture. Thanks!!
Thanks for the video. I started working on lawn mowers this summer. And I recently picked up the exact mower with the same problem. So it will be fixed now thanks to your video.
Taryl for President 2020
I have this jonsered st2261e snowblower about a year old no spark anything you could tell me to do or try anyway I think your TH-cam is great thanks Dave
Hey nice one Taryl and gang love these intro videos you do before you get on the tools , Top Channel , Regards from across the pond 🇬🇧
Nah. They're bad. This would be a much better channel if he ditched the teeth and wig and "just the facts, man." His actual content is very good, every time.
When you run through the car wash, make sure to spring for the deluxe wash. This way you get a full body waxing at the same time.
LOL
I have 222 horse Kohler 0 ton mower. Both of them have no adjustment they run full throttle all the time. Should I replace the governor since I’ve been running these mowers for five or six years full throttle.
so we did everything like both videos said to do now that everything is reassembled when we turn it over it doesn't start its getting a spark we also compression tested it it has a new carburetor on it as well as a new gas vacuum diaphragm. when we spray a tad of starting fluid in it it will start up we don't know where to go from there
I’d love to see how to replace the brake on John Deere 210. Also the belts if you have one around. Love your videos
Grass rat with a junky mower here. Enjoyed your gid. Have a bad Cv12.5. What is a fair overhaul bid? Like to try it myself.( Work on airplane engines),but on dialysis right now and am limited. Have heard parts are scarce. Could you suggest a source? Thanks! Keep ' em coming!
That was so helpful! Thank you!
Oh man I so needed to see this video!!!.....Thanks Taryl!!!
Hi Taryl. On my mini bike i used to throw the governor gear away and plug the hole.
"K" doesn't stand for konfusing, but "K" stands for Krap.
Hey when y'all coming out with a movie grass rat?
Love the videos guys. Always funny and educational
once again, hilarious intro
Your computer mouse pointer should be a Taryl pointy finger 😆 Great video loved every second that, thank you all👍
There are times I feel like some of E-Z Wurkz's junk has come into my shop.
Ok but how do I take the govoner off? Please help
Exactly!
Very helpful video
great video once more, some new actors
My briggs 5hp comercial engine just working. I opened it up and found the crankshaft dipper bent and broken with the govenor gear striped. Know idea what happened. Do you guys have any input
I looked for that "POS-540" part number for this engine and I couldn't find it......Can you elaborate on any acronyms in this part number to make it easier to look up?? ha!!!!
Good show thanks
When the governor gear fails what are the symptoms?
sewing1243 generally, your engine will run very, very fast. In case you don’t know, the governor is what balances out the throttle input while the engine is operating. That “pin” that he showed going up and down pushes the governor shaft. That shaft goes from inside the engine to the outside. On the outside it connects to the throttle assembly. When the engine slows down, the pin goes back down. This speed up/slow down action is occurring very fast. Anyway, that is probably more information than you wanted. There are a couple of other reasons why an engine would “run away”. But, the most important thing to do is to immediately shut the engine down and investigate.
I accidentally installed the governor gear all the way without the pin. Can I put the pin on after?
Can’t wait for the POO6000
I thought the K in Kohler stood for Krap. Hey Taryl, what took out the gear in the first place? Are they made in the factory in Kohler WI. where they make toilets? Hmm, could be...bucket of what?
At the beginning: that's how Kohler planned the courage
Oh wait I forgot this video was about one
This is a unrelated question I have a 52” ex mark walk behind turf tracer with a Koehler engine efi it came to me with fuel leaking out the head so naturally I changed the fuel injector still leaks fuel out exhaust and plugs still get wet so I changed the high pressure fuel pump still same thing and I changed the computer out and changed out the other fuel pump still no change......do u have any advice or can u help
How do you set the Governor on the Kohler courage engine after reassembled
Did you ever figure out? I don't know what position the arm needs to be.
Hi
I need your support
I have Kohler engine i changed seal pan but i have groove around pto shaft leak oil after assembled new seal
What can i do
I learnt alot of things from kindly your answer
Thanks
Just curious but are the Kohler 7000 series OHV a decent engine?
So Mustie1 was trying to figure out his free Lamborghini and I mentioned that Taryl did a custom Roof Palomino if he couldn't figure it out.... Gotta love em both 😍
What happened to Koehler the command series was sweet
Too be continued Tayrl and Junior?.(E-Z Works 💩⬅POO-5000)
Great video!!.
All the Krohlers are"bucket"engines.HAHA!!.
Drain the Swamp!
TARYL 2O2O 🇺🇸
What does "crafted in USA " mean?
Number F is my gr8test.
what is junior saying bonk buck ?? at 4:30
What's is a ”compression release side”
poo 5000 sounds like a winner
Could you do this Same thing on a single cylinder Kohler command engine?
Its too bad Krohler turned their engines into"bucket"engines.
This is why I buy Honda or Kawasaki engines,the Briggs Vangaurd is a decent engine too.
Briggs Vanguard i love them engines ,easy to work on ,not much to do with them but change oil and maintenance. never had Honda or Kawasaki engine on mower , ATV and they was great engines
Is ez wurkers a shot at MTD?
Yea! Fix'd that "bucket" engine.
These keep getting better and better!
Great job
I can’t get mine to snap in like yours.
Good stuff. Still waiting for that Sasquatch episode though. Come on, do it for The Sacred Cowtipper. You can even have Squatchie fight that bear and then team up and go after that crook character that rips people off.
Steamy "POO" And Blast "O,s" I love it. Lmfao 😷 Nice vid
I got to say this is the most cringy channel I have seen on youtube... Ridiculous... yet I love it and watch every one. LOL Its like those silly dumb movies that actually have a good message behind it and at the end you actually learned. Reminds me of Three stooges, Threes Company etc type comedy.
Hey Taryl, just got done working on Troybilt self propelled mower with a Briggs and stratton 11p902-2693-b1 engine. Thought it might be a good how to video on how to change the timing gear. For whatever reason they originally had a cheap plastic gear. I'm personally still having issues with it. I've put the gear and the cam in correctly, adjusted the governor arm with the throttle open, and I believe I have all the springs on correctly. It's running again but its running slowly and vibrating like crazy. Any ideas on what the problem could be? Oh I also put on a brand new carb since the old one seized up completely
you did it all wrong. the proper fix according to the repair manual is 1st step. toss it in the junk pile.
Yeah baby yeah Austin powers
Poo 5000!
Hilarious!
Kroler engine ,never heard of them heard KOHLER ENGINE
Whoosh.
and so god said, make it so, and then on the 8th day, EZ works was created in his mirror image. and thus, evil was created to bring balance to the universe,
GOD get it right its his name
What are symptoms of a broken Governor?
“Also known as the bucket engine” also know as the junk engine throw it in a bucket, the trash bucket 😂🤣
Throw it into one of their toilets
They can make what they want , I have a few old brick-top Lawn-Boys that will out live my grand kids :D (long as they don't straight gas them!!)
No oil taught me at 10yo how to rebuild those omc lawn boy...
today it's a" lawn LGBT "
mitzvah golem - Lol! Yep, Lawn Boy is now ‘Lawn Folks’ just like Ace Hardware used to be ‘the place with the helpful hardware man’ but now the commercials say ‘Ace is the place with the helpful hardware folks’. 🤣🤣
This is gonna be the best Worst mower ever created! LOL
Krohler Courage has a plastic crankshaft. Ask me how I know
how to reset arm after changing gear wiped out 2
Have you heard a riding mower engine that keeps breaking starters ? I had one last year that I would say I put at least 6 starters on it through the whole mowing season then I just said the hell with it and scrapped the thing
what motor was it the engine did ya catch what the brand was
@@hunter7476 it was a 17hp tecumseh enduro with the cast iron cylinder liner
funny video you guys are better than tv
Yup bucket engine, when the block cracks "all the parts are in the bucket" or scrap pile where they belong, swap it over to a kamasaki
Cool so true, plastic crankshafts, plastic bushings and plastic nuts. Just think how easy that will be to fix. No torque-ing and if you strip a nut well don't worry they are cheap, and inexpensive. LOL!
Say what you will, KROLLER engines have the best Sound. Like Harley does in Motorcikles.
newer ones sound really quiet when they go boom
I keep hearing F@ckit engine ....🤣🤣
E-Z Wurks, MTD samething
Plastic crankshaft yo.....hahahahaha
PHUCKET ENGINE!
The “Works in a Bucket” Engine I Know it Well 🤕😳😵😵😵
ok ok Geeee.. invent grass that never needs to be mowed, stays short and "there is your breakfast, dinner, supper" mate worth Billions....:)
Mustie 1 "ALERT" Mustie 1 lastest video shows "Mustie 1 " using his Taryl apparel coffee cup as a gasoline container as he drains a bowl on honday gas engine
What no GIE video ??
They should call it the fuck it engine Bc every time it breaks you say fuck it
You could've replaced it with an older Briggs. That's how much the Kohler is worth.