Canon Support Code 6A80 6A81 6000 1313 + Knocking Sound: fix waste ink assembly lever reset PIXMA
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- We examined a printer that produces a knocking sound, then followed by an error message 6180. The subsequent error messages are 6A81, 6000, and 1313. We found a piece of a misplaced plastic part. However, upon installation, it did not fix the printer error. We further research the situation and found the solution is to reposition the ink sucker and load one of its springs.
Very helpful this helped me learn how the printer works and I saw that the pad that cleans the printer heads was jammed up. I push it down and now it all works again.
Kevin, thanks a lot for this clip, I had not the same problem, but showing me the opened printer, you helped. me to understand the mechanism, so I knew, where to press. All the best
Thanks Kevin. Fixed! I had the knocking sound. Followed your video, unfortunately knocked the white box off centre and had to follow your other video to put that right. Had to take off the other side and front panel as well. Can't believe I got it all back together and bingo! it worked. Thanks again for your helpful videos
thumbs up 👍!!!
Super, danke. Du warst meine Rettung. 🤗
Thank you for posting this video. The problem with my MX870 was that the white box/tray on the right side had become stuck in place due to some old ink. To fix this, I simply pushed down lightly on the white box/tray piece, cause it to move downwards a little bit, and then cleaned up the old ink nearby with a paper towel and a little acetone solvent (alcohol would work here too, I believe). Hopefully this description can help someone else. Best regards!
It did - I have the same printer - it happens every couple of years and I forget how - but it worked
Kevin, once again thanks for your kind and thoughful help. Do you know where I could buy a replacement lever? Mine cracked and broke.
Thank you for sharing such an amazing and clear video.
Hi Kevin, Thanks so much. I did subscribe because you asked me to. Update: My printer now is happy. It's getting really finicky in its old age. I hope it stays happy. I am wondering -- maybe you could tell me -- why is there so much spattered ink around those two gray pads? I tried doing a cleaning to unclog the print heads, and did an alignment (that's when I got the 6A81 error). What else should I try? There is SO MUCH ink spattered around there. Is there a tray inside I should empty? It is indeed very sticky and inky around there. You demo of how loose-movement the pads should be was useful. Somehow the part holding the two pads was stuck to the thingie "above" or "north" of them. I think it's only a matter of time before it gets stuck again. But mine is a MX886 (the big black Pixma) and taking it apart is scary and looks prone to error. If I lived in your town, I'd just bring it in.
Thank you so much for this helpful video
Thanks, it works for TS705 too. I had to move this „ladder” oposite way, but in general works.
Thanks a lot, you are a great master!
Thanks , I was able to fix my IP4800
Super video! I applauded for $5.00 👏👏
Wow, thanks
THANK YOU SO MUCH, you save me time and money! One more question about the printer door, why that door doesnt go automatically open when printer start printing? is that normal? TS5050 version i have TNX
Thank you so much for this helpful video. I'm currently working on a Canon Pixma TS5040 with the same problem, but however the spring for the lever seems to not to be loading. How can I fix that?
Thanks for subscribing! You can take a piano wire and retrofit a spring.
Thanks you so much , very efficient
Thank you!!
Thank you for subscribing to my channel. You are welcome!
Excellent advice as always.
Thanks!
Thx Kevin for your videos.
Printers have so many stupid error codes that if you make one video for all the stupid printer error codes you will make videos for the rest of your life xD
True. And they don't even bother to tell you what the error is about.
@@BCHTechnologies no no no, just buy a new printer, don't try to fix that error code ;) ;)
Haha. They wish. Here comes Kevin!
Your model is different then my mp 560. I have the 6A80 problem but cannot open the side panel per your instructions. Do you have a video for this model?
Mine is a TS704, its been showing error code C000 but I'm wondering does this trick work on it too? If not, what do you think I do? Pls I need answers.
Hi thanks for your video. I subscribed already. My Tr8520 can power up and scan but got error code 6004 if I try to print. After watch your video, I found the part that fall off from your video at the bottom. I put it back. Tested the 4 spring of the waste pad is good. Power up without the scanner and auto sheet feeder connect but got error code 5040 immediately. However after I put everything back and cycle power twice, it start working again. Thanks my problem resolved. Now the question is why that part fall off? Could this part fall off from shipping? I found the ink consume so fast. I only printed 300 pages in 2 years and already on 3 set of ink
Hi! I'm from Philippines, I just want to want to ask what do I need to do because my printer(TS6120) is doing the opposite, it will firstly appear the loaded spring then the second time pass it will be unloaded spring...I'm not sure how to make it like yours in vid where the spring will unloaded first then it will be loaded the second time....I've tried moving the ladder upwards then i heard the clicked sound just like yours...
Tank you
Tanks
How to fix support code 5B00?
how to clean error 6004 canon ts5051
مرحب كافن
Sip
Man why can’t some just provide the information THEN we will hit like because we are satisfied that we didn’t have to hear the speech of subscribe and like crap.