Hello, you can read this "Working with Motion Studio" user manual, this is the link www.leadshine.com/upfiles/downloads/bf7d839b4b17b00d9c7fd69029ce16bf_1675404763811.pdf
Merhaba bü Leadshine Closed loop stepper drive encoder sız çalışıyor mu? Ben da motor encoder çalışmıyor ne İŞ yapıyorum problem yok olur bana yardım etti biliyor musunuz önceden teşekkür ederim
Sorry Leadshine has no products sold on Aliexpress now. Any product inquiry, pls visit our website: www.leadshine.com and leave us your inquiry, our sales will offer the reply soon later.
i have an application which uses a closed loop stepper motor controlled by an s7-1200 plc, if plc command the driver to travel (e.g.. 100mm) ,so whene the motor reached target position (eg..100mm), i need the driver to tell the plc that target position is reached via it's (a contact logic of 0 or 1) digital output which will be connected to plc digital input. does this feature available in your stepper drivers. for a closed loop Nema 42 if so give me the driver refrence
Yes, it's available to reach the function you required, you could config the one of the output signals as "in-position completed" (or set 0x23 onto 0x0157, for more details, please visit our website: www.leadshine.com or contact us by email: sales@leadshine.com. Have a nice day!
Hi is it mandatory to tune?
Is the process the same for EL6 servo ? Can you please make a video for how to use motion studio and trigger for servo please
Hello, you can read this "Working with Motion Studio" user manual, this is the link
www.leadshine.com/upfiles/downloads/bf7d839b4b17b00d9c7fd69029ce16bf_1675404763811.pdf
good software.
Thank you.
Merhaba bü Leadshine
Closed loop stepper drive encoder sız çalışıyor mu?
Ben da motor encoder çalışmıyor ne İŞ yapıyorum problem yok olur bana yardım etti biliyor musunuz önceden teşekkür ederim
Hello, if you have any problem, please send the email to us, the email is sales@leadshine.com or tech@leadshine.com. Thank you.
enkoderli motor encodersiz calisabilir surucunun yazilimi desteklerse enkodersiz calisir. ama acik dongu zayif bir yontem.
can you tell me where can i download the 3D file of the product?
Our website: www.leadshine.com.
i have baught the HBS86S stepper drive from alliexpress , i was thinking it was one of the leadshine products
AM I wrong !!!!
Sorry Leadshine has no products sold on Aliexpress now.
Any product inquiry, pls visit our website: www.leadshine.com and leave us your inquiry, our sales will offer the reply soon later.
i have an application which uses a closed loop stepper motor controlled by an s7-1200 plc, if plc command the driver to travel (e.g.. 100mm) ,so
whene the motor reached target position (eg..100mm), i need the driver to tell the plc that target position is reached via it's (a contact logic of 0 or 1) digital output which will be connected to plc digital input.
does this feature available in your stepper drivers. for a closed loop Nema 42
if so give me the driver refrence
Yes, it's available to reach the function you required, you could config the one of the output signals as "in-position completed" (or set 0x23 onto 0x0157, for more details, please visit our website: www.leadshine.com or contact us by email: sales@leadshine.com. Have a nice day!
Please don’t play music in the background when doing an instructional video, it’s so distracting but thanks for the video.
Thanks for your advise, We'll improve on that in future videos