Walschaerts Valve Gear Cut Model
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- 本映像は、昔使われていた蒸気機関車の蒸気エンジンの主流であった弁機構、ワルシャート式弁装置のタイミングが目視できるカットモデルである。
この映像では、ラップとリードまでの理解は難しいかもしれないが、蒸気エンジンの弁装置の動きに関しては、よくわかると思われる。
なお、前進、後進共に、フルギアの状態である。
This model is Walschaerts Valve Gear Cut Model.
Please seen!
The movement of the valve gear.
Thank you!!
Great video thanks for sharing. The Combination link is not integrating the 2 movements. It is only supplying the Radius Rod movement. To fix, the upper pivot of the Cintrol Valve needs to be positioned near the upper 5% of the Union link (lowered slightly) so that the 2 input movements can be summed. Currently the lower link is having no effect.
Comments are of course correct in observing that the combination lever here is ridiculous. But the return crank leading the main, which some have queried, is correct, because this model uses a D-valve, which has to have live steam on its outside, keeping its face pressed down. The crank trails the main in most of the locomotives that we have grown familiar with only because they all employ piston valves, which have live steam in between the valve pistons ['inside admission', as opposed to 'outside admission' here]. They don't HAVE to, but usually do because this reduces leakage waste past the valves and through the glands.
Fun fact: The combination bar in this video does exactly nothing. It is better to be removed to reduce clutter and confusion!
Thank you i'm sitting here and think about what that thing will do while watching the video
Exactly.
LOL! I was staring at it trying to figure out what the heck it was there for. Also, it'd have been interesting to see the reverser in action.
I noticed that, too. It isn't the usual arrangement where there is to be a subtraction (and partial cancelling) of the main valve action.
The two bars in the centre - yes I can see that - just for decoration. Should be a parallel motion to prevent side thrust on the valve link.
CUANDO UNA PERSONA COMÚN COMO YO, AL VER ESTOS MODELOS EN CORTE COMPRENDE EL PRINCIPIO DE FUNCIONAMIENTO DE ESTOS MECANISMOS AL MISMO TIEMPO COMPRENDE LA GRANDEZA DE LOS GENIOS QUE LO IDEARON.
That is great! Just a suggestion, maybe you could blow smoke into the model, that way you could see how the steam works.
Excellent demonstration showing internal movements I’ve always wanted to see how these monsters harness their power and the purpose of all the arms rods linkages valves. As far as the direction Fwd or Rev that’s immaterial the basic movements will appear the same to someone like myself great display!
Have I got this right?
The high pressure steam would be coming from the red area above the horseshoe shaped valve. As the valve moves to the left, the right hand side tube is opened to the hot steam and it rushes in to move the piston along the cylinder. But simultaneously the left hand side tube is connected to the exhaust pipe (whatever its called) and the coolish steam is forced out the exhaust pipe by the piston.
Then as the valve shifts, the cycle is repeats on the opposite side?
Yep pretty much it.
The flying crank should LAG a quarter turn behind the main crank, not lead it. Your engine is thrown in reverse, in other words, the wheel should be spinning counterclockwise for this model to be correct
I noticed that, too.
It looks as if the Johnson bar, the reverser, has been thrown into reverse while the driver's are still in forward motion.
Exactly best idea for growing humanity
justandy333--that is correct. And it is 'exhaust pipe' the smoke stack of a locomotive.
FS2K4Pilot--it depends on whether the valve is inside or outside admission.
+Roy Reynolds True, and since this is a slide valve and not a piston valve, it's outside admission.
Great work building this model, but it seems to me there is something wrong with the way the combination bar is hooked up. It seems to me it would do nothing in this configuration. It needs to have an offset between the radius bar and the valve stem. See this link for more info. en.wikipedia.org/wiki/Walschaerts_valve_gear
brilliant engineering
Qué tipo de máquina o motor es ese
Passionnant
Ont ne lasse pas de ces pie es d'orfèvrerie mécaniques*****
Спасибо!
There seems to be something wrong with the set up. The rod from the expansion link isn't supposed to connect directly to the valve is it?
What’s that middle hole for? With the edges painted blue
The blue hole is the exhaust.
What’s the function of the link bars between the crosshead and the valve gear. It seem to do nothing but go along for the ride?
Thanks for an excellent demo.
Oh my ! That was almost naughty to watch, especially at the 0:52 mark !
Is it okay to assume that steam is sent from the tube that looks small on the left?
It is powered by compressed air.
So what about steam?
蒸気を供給してもこのモデルは動きます。
This model works even if steam is supplied.
J'ai beaucoup aimé le design👍❤
Thanks!
I think your eccentric crank is backwards.
Very Nice, Thanks.
¿What role does the combined bar in this steam engine?
Free energy, whooaaaa
Thanks, great vid.
Hello. What would the piston in the steam chamber be made of, that is, the one that produces the mechanical work?
Interesting that they used a slide valve rather than a piston valve....
Sooo nice
Genijalno!!
Ya podre morir en paz😄 ahora que se como funcionaba
super video..................
How it's different from steam engine?
On the part where it is sped up its actually running backwards :(
Forward or reverse doesn't matter to a steam engine.
It's running full speed in reverse.
Where can I purchase this model?
Cool !
Чётко и ясно!
Are you able to send this what is the price
Cuál es la enseñanza que nos quiere dejar con ese vídeo
Good
무슨 물건 인가요?
What's the rate of this.
Pls make slow motion video
good👍🏻
BRASIL OK.
10년이나 된 영상
neet!
Cool 😎
Perfect explain
How did they get a video of me in bed????
Walschearts ⇒ Walschaerts
Walschaerts = Heusinger
Well, actually, Mr. Walschearts was Mr. Walschaerts evil cousin. That explains the discrepancy with the flying crank and the combination lever.
👍👍👍👍
Where to be purchase send address.
Iove..u..Fc
cara mendowload
🔥🔥🔥🔥🔥🔥🔥👀
Depois a bosta da minha professora vem dizer que sociologia vale mais que engenharia. Só a conta para desenvolver essa braçagem vale mais que a vida de Karl Marx hahahahahaha
Cult cargo - copying something, idea of what is not clearly understand.
steam
steem