Holy crap, that fuel pump cutout is a lot lower than mine. That would make fuel lines soooo much easier! The one I bought sits closer to the top and the R/A ORB fittings tuck up into the bed brace. I had to shim the tank down a little to make it work but I go it there.
If you chose the pickup tube option you’ll need a -6orb to a barbed or AN fitting (depending what fuel line you’re running) to the size line you choose to run. You’ll also need a standard SAE 5 bolt fuel level sender to match your gauge. And then of course whatever fuel pump your decide to run. Give us a call during normal business hours and we’ll be happy to help you with any questions you have.
Filler neck location is up to the installer. It could go between the inner and outter bedsides then be brought out on the inside or outside of the bed. Or you could put a cap in the floor in the corner. The tank also comes with options for center fill with cap or passenger side fill if desired.
Holy crap, that fuel pump cutout is a lot lower than mine. That would make fuel lines soooo much easier! The one I bought sits closer to the top and the R/A ORB fittings tuck up into the bed brace. I had to shim the tank down a little to make it work but I go it there.
Also works on a fridge 57-60. Just need to grind out 2 small gussets on the crossmember.
Nice install. I want to get one of these. Y'all make some quality parts.
Thanks 👍
Do you have 26.0 gallon for 2014 silverado 1500 5.3L Z71 LT. I want to remove tank from drivers side and put under the rear of truck. Thnx
Nice tank. Have a question can you get those things in -8 instead of -6 for the fuel
We offer a -6orb to -8an adapter fitting that can be purchased with the tank.
I have a question does your fuel tank kit work on a 1971 ford f100 long box with carburetor engine?
Yes, we have a LWB option. You can find it on our website. Www.soullessinnovations.com
good can you sent abroad or just in USA ONLY
How much for a 1970 and where to get
Soullessinnovations.com for pricing and to order
So I bought this tank and I plan on running a carburetor what else do I need? I only bought the tank.
If you chose the pickup tube option you’ll need a -6orb to a barbed or AN fitting (depending what fuel line you’re running) to the size line you choose to run. You’ll also need a standard SAE 5 bolt fuel level sender to match your gauge. And then of course whatever fuel pump your decide to run. Give us a call during normal business hours and we’ll be happy to help you with any questions you have.
And just like that............ WHERE DOES THE FILLER NECK GO?
Filler neck location is up to the installer. It could go between the inner and outter bedsides then be brought out on the inside or outside of the bed. Or you could put a cap in the floor in the corner. The tank also comes with options for center fill with cap or passenger side fill if desired.
On my 68 I'm thinking about behind the rear driver side tail light Bada Boom Bada Bing Carrie