The Land Pride QH05 Quick Hitch will make it even easier to hook up your implements. In most cases you can hook up to your implements without getting off the tractor.
I'm a little late to the game seeing these but I purchased them from Messicks just 2 days ago and they arrived this morning. Installation took less than 15 minutes and the quality is absolutely first rate! The fact that they are locally made too made this one an easy choice. Thanks for recommending these Neil.
These adjustable sway bars look great Neil, I can’t wait to get a set for my BX. It’s always great to see company’s not only working together with other company’s but to see them take such pride in their work.. making sure they are a true, smooth, perfect fit takes a lot of trial and error and it’s good to see you guys perfect it the way you did before mass producing them. Keep up the great work Messicks!
Neat. I lost count of how many bent rods I replaced by not tightening them up with a heavy implement (like a snow blower) on the back. I've since learned to tightend them up, but the new sway bars look great and the price isn't bad.
Honestly, for the design and quality that goes into those, I think the price is more than fair! Wish they had been available almost 20 years ago when I bought my BX! Great idea!
I bought two pairs. One for my 2380 and the other for my 23S. They make a huge difference pulling a landpride rototiller . Very noticeable stability, no sway anymore. they go on very easy too, as advertised . Big thanks ! 5 stars Neil !!
Very cool. Just bought one. I have always had my Backhoe on but this year decided to get a rear snow blade to complement my front loader snow removal method. This will make attaching this and other implements much easier.
I have a set of these made by Mark Hodge and a Pats Quick hitch. I absolutely love the combination. It completely changed my 3 point hitch. FYI I also got a pto extension so I can run the pto implements with the Pats
How refreshing to see something American made with a goal of high quality. As a consumer thais all I need to hear, I am so tired of the poor quality Chinese trash.. I am in the market for a new Small BX series tractor this summer. These sway bars will be one of my upgrades.
Great upgrade! I ordered mine from Messicks and received it literally the next day ! Bought one for my BX 23S and one for my 2380 ! Great parts department service.
Ordering mine right now...don't have the BX yet, but starting to get things for it as I think about accessories, implements, and attachments I will use.
Heyhey Neil I was so pleasantly surprised to find these on my B2601 when I bought it. Coming from the old school farm tractors I wasn't expecting something so nice. Nice job
Hi Neil ! *wow* ! I've now seen a few videos showcasing this amazing upgrade ! 👍 One day I hope to get my hands on a set of those ! *they are awesome ! Wow !* 👍
Neil love the channel even though I’m a green guy! Found you from TTWT. You should make these for 1025r and 2025r too. You could double your profits as many people buy green and orange tractors alike!!! Sweet high quality product and best of luck with this new venture!
too bad you didn’t implement the elongated center hole like on the B3030 sway bars. useful to give the 7’ blade some swing so it can move a bit, makes for a smoother ride
I just bought a pair of these from them and I absolutely love them!. I have a TH-cam channel and I will be doing a full review on them. Thank you so much!
Turn buckles work better with a quick hitch you can get them tighter and there is no slop. Holes in the slide type don't always line up so you have slop that will keep getting worse as it wears.
That is true. While there are a lot of adjustment holes you typically have to choose a position that is somewhere between "too tight and the pin won't go in" and "a bit too loose at the next hole". For most implements the tiny amount of slop shouldn't cause any issues. There are a lot of tractors that come with this style of stabilizer from the factory.
I have it and it makes life soooo much easier. Glad you guys started making some for all the BX customers. Waiting list for them privately made is long. Great video Neil
These look a heck of a lot easier buy my concern is aren't the stock turnbuckles made to be the weak point? If I'm cruising along, hit a tough root, I would rather these break before my implement or something even more expensive on my tractor.
Great idea to make theses a dealer / parts accessory. Bought the Hodges version years ago but I know he doesn’t always offer them or maybe even stopped selling them on TBN. Worst part about the turnbuckles is they don’t stay open when you back into an implement. Wouldn’t be without mine.
Been hooking up 3 pt implements for 30+ years. Have a quick hitch now and wouldn't do without. Had to modify one older implement, but it was a once and done. For those looking at a quick hitch note that a hydraulic top link does make hook up easier. So in my case my tractor (MX6000) came with telescoping stabilizers and extendable arm ends that I will never use. I would rather have had side mirrors and a right hand outside door handle included. Some manufactures standard equipment combinations don't make sense to me.
These look really nice, and a great improvement in ease of adjustment. That being said, I put a quick hitch on my BX, so once I got them adjusted, I'll never adjust them again. They can rust in place. I know the next question will be, what if your implement doesn't work with your quick hitch? I'll modify the implement so that it does. It is well worth the trouble.
Great idea as turnbuckles are a pain when they get older. I was surprised by one of your comments below that you are only doing them for Kubota. I thought you might do it for your New Holland brand. By the way, I did appreciate your response on my question with tractor time with Tim in regards to the similarities between New Holland and the LS brand. I guess you're waiting for Tim and Christy to get that orange machine videoed more! Lol lol seriously, they bought a really good model in your Kubota line and I am curious on how they are going to use your custom power beyond accessory.
Jim, is your NH one of the models made by LS? If it is you can probably get a set to fit your tractor from LS if NH doesn't offer them. My LS MT2 25E came standard with them, so it might be worth checking into. If not then maybe these made for Messick's will work, they look top notch and the price is more than fair. Either way, best of luck.
The pto bottom plate needed to be turned upside down in my case so that the pto wouldn’t catch and hit on it while spinning. Just FYI if you have that problem remove the pin and cotter pin that holds that plate and turn it so that the long side of the plate is on the bottom and reinsert the pin and cotter pin. Would have been nice to include this in installation instructions.
That caliper style adjustment honestly surprised me. Great idea for more adjustment nuance than 2 inches between holes. Only issue is don't the nice ones on bigger tractors give you a solid and a move space for attachments that need a little sway?
I have a pair installed. You will have to flip over the flap piece upside down to allow your pto female of your implement that slides on the tractor pto shaft not to hit when you lift up on the implement.
Neil, I assume this won’t be a surprise but they also fit my GC-1705. I bought it assuming the geometry would be close enough and it fits perfectly. Great upgrade!
These look great and I appreciate the work, effort and local manufacturing that went into them. I have two questions. Am I the only one who has no trouble with the turnbuckles? And, the way the holes are, it seems there would be some slack and sway in the implements since you can't really tighten them like the turnbuckles.
The turnbuckle has an infinite positioning for nice tight hold. Have you ever found yourself with the hole just a little bit off? Not tight enough so that it slops around?
These bars are awesome but the pins could definitely be better. I replaced mine with some push pins that can easily be removed when changing the attachments. I think you should really considering changing them. Other than that, these are fantastic!
Neil I was wondering if I could get the most compressed pinned length from center to center on the mounting holes, and the most extended pinned length. I was hoping to adapt your nice stabilizers to my tractor.
What i need is a how-to video on the three point hitch kit. I got a cardboard box full of parts from my dealer and a parts list. The paper in it was destroyed by a mouse so i have no idea how to assemble the kit. The parts are all sitting in a 5 gallon pail and no idea how they are supposed to be assembled. Kinda turning me off Kubota seeing this kind of thing. But i have all winter to figure it out before i need it for my rototiller.
These look well made, but not something I really need. I put a quick hitch on my BX years ago, so no need to readjust my stabilizers when changing attachments.
How compatible is your quick hitch? I'm on the fence about buying one right now for my BX. The implements/attachments I am getting are Kubota/Landpride brand.
My 2005 old blue came with this option. Now I'm dreaming of the ultimate hook-up. Hydraulic Top Link and Hydraulic Spread / Close Between the 2 Lower links. SDH the Great Unknown in CT
Neil you need to mention the longest and shortest length these have at the attachment pin holes please. I have another sub compact brand tractor and want to buy these for it.
Hi Neil I enjoy all your videos. Concerning telescopic stabilizers. Not sure who makes this product but a while back I bought a set of Hodge Stabilizers (they look very similar to the ones shown in your video) only to discover that the squared-off ends interfered with a few of my implements, specifically my LandPride landscape rake and my Salsco chipper. I tried to file off there corners of the stabilizer bar ends but was unable to remove enough material without compromising structural integrity. Of course, having modified them, I couldn't return them so off they went to the scrap yard. I called Mr Hodge to explain my problem and was told that I wasn't the first person to have interference problems. Just wondering if you tried using these with a variety of implements? Thanks for reading.
Nice kit. Not expensive for what you are getting. Any in the pipeline for "other" SCUTs? Paticularly those that turnbuckle the 3 point hitch from the outside? LOL! Thanks for sharing!
@@MessicksEquip Weird. I called in around 2 Pm EST and your parts rep wasn't sure so he went to someone higher up the chain. Came back in 4 minutes and said sorry they do not fit. But said if acceptance is strong they would likely get to that model in time. Added that if it wasn't on the web site list it does not fit. Thanks for your great videos
Hey messicks, what do you think about the new kubota 5 series excavators and 3 series svl’s, and when you think we’ll see them here. They are already out across the pond. Very curious if they updated the cab filtration on both as they are kind of a joke.
Neil -- I ***NEED*** these for my B-Series 3200 -- you guys are making them now for the BX series and the L-Series but not the B. I'm stuck using the turnbuckles and it's driving me nuts with my field mower constantly rattling the turnbuckles loose while mowing pasture. HELP!
I'd be happy to test this this spring on our channel if you want to send me a set ;-) I'm still a little concerned with my tiller as it needs to be fairly tightly centered to keep the u-joint chatter down when fully raised. Best Regards, Jason Huser
The Land Pride QH05 Quick Hitch will make it even easier to hook up your implements. In most cases you can hook up to your implements without getting off the tractor.
I'm a little late to the game seeing these but I purchased them from Messicks just 2 days ago and they arrived this morning. Installation took less than 15 minutes and the quality is absolutely first rate! The fact that they are locally made too made this one an easy choice. Thanks for recommending these Neil.
These adjustable sway bars look great Neil, I can’t wait to get a set for my BX. It’s always great to see company’s not only working together with other company’s but to see them take such pride in their work.. making sure they are a true, smooth, perfect fit takes a lot of trial and error and it’s good to see you guys perfect it the way you did before mass producing them. Keep up the great work Messicks!
I smell a new install video! Now how to work the drone into this one🤔
@@davidparadis490 Haha, working in the drone may be a bit tough but I’ll have to see what I can do🤔
Can’t ever have enough upgrades that’s for sure!
@@BiffsEquipment i just bought a pair...I hate turnbuckles...on anything!
@@davidparadis490 couldn’t agree more
Neat. I lost count of how many bent rods I replaced by not tightening them up with a heavy implement (like a snow blower) on the back. I've since learned to tightend them up, but the new sway bars look great and the price isn't bad.
Smart addition to Messick’s Parts Neil!
I ordered a set from M Hodge several years ago to go with Pat’s Easy Change for my BX25D
Honestly, for the design and quality that goes into those, I think the price is more than fair! Wish they had been available almost 20 years ago when I bought my BX! Great idea!
I bought two pairs. One for my 2380 and the other for my 23S. They make a huge difference pulling a landpride rototiller . Very noticeable stability, no sway anymore. they go on very easy too, as advertised . Big thanks ! 5 stars Neil !!
Just seen this video. Looks like a great product. Just placed an order. Can't wait for the delivery. Love your videos Neil. Keep them coming.
Just installed mine today. Very nice improvement over standard turnbuckles.
Very cool. Just bought one. I have always had my Backhoe on but this year decided to get a rear snow blade to complement my front loader snow removal method. This will make attaching this and other implements much easier.
I have a set of these made by Mark Hodge and a Pats Quick hitch. I absolutely love the combination. It completely changed my 3 point hitch. FYI I also got a pto extension so I can run the pto implements with the Pats
How refreshing to see something American made with a goal of high quality. As a consumer thais all I need to hear, I am so tired of the poor quality Chinese trash.. I am in the market for a new Small BX series tractor this summer. These sway bars will be one of my upgrades.
Great upgrade! I ordered mine from Messicks and received it literally the next day ! Bought one for my BX 23S and one for my 2380 ! Great parts department service.
I added these to a Ford 4610 SU that I had. My T4.75 and current 4610 Ford AP has them. Great addition to the little BX.
These look great Neil! Can't wait set them up and get to work this summer!
Thanks Neil, got pair on the way along with a TerraKing Grass catcher system.
Just placed an order for them. It's going to be so much easier. Thanks for posting all the great vids. Wish you were my local dealer.
Ordering mine right now...don't have the BX yet, but starting to get things for it as I think about accessories, implements, and attachments I will use.
Nice! A much needed mod that was hard to get your hands on.
Heyhey Neil I was so pleasantly surprised to find these on my B2601 when I bought it. Coming from the old school farm tractors I wasn't expecting something so nice. Nice job
Hi Neil ! *wow* ! I've now seen a few videos showcasing this amazing upgrade ! 👍 One day I hope to get my hands on a set of those !
*they are awesome ! Wow !* 👍
Awesome price point. Must have for someone that changes implements with different hitch widths.
Well, I’m not surprised y’all have taken this step above and beyond for your customers. Good on y’all!
💥 Very cool Neil!
*Keep on tractoring!* 👍
This upgrade is great - - No sway with no sweat.
Neil love the channel even though I’m a green guy! Found you from TTWT. You should make these for 1025r and 2025r too. You could double your profits as many people buy green and orange tractors alike!!! Sweet high quality product and best of luck with this new venture!
On a side note, you guys are great. Just received an order from your parts department.
Awesome, thank you!
Ordered before the video even finished. Cannot wait to get these things in to use.
too bad you didn’t implement the elongated center hole like on the B3030 sway bars. useful to give the 7’ blade some swing so it can move a bit, makes for a smoother ride
I just bought a pair of these from them and I absolutely love them!. I have a TH-cam channel and I will be doing a full review on them. Thank you so much!
Very well made stabilizers! If I had a BX I would have ordered them before the end of the video.
Nice quality. Need for the L series as this looks better than the factory ones.
Turn buckles work better with a quick hitch you can get them tighter and there is no slop. Holes in the slide type don't always line up so you have slop that will keep getting worse as it wears.
If you have a quick hitch you typically set your turnbuckles once and then you are done.
That is true. While there are a lot of adjustment holes you typically have to choose a position that is somewhere between "too tight and the pin won't go in" and "a bit too loose at the next hole". For most implements the tiny amount of slop shouldn't cause any issues. There are a lot of tractors that come with this style of stabilizer from the factory.
A little bit of slop is a good thing to me. When you have things set up tight you’re forcing the metal pieces together
Sold out... not surprising since you’ve hit the nail on the head with MY complaint about the OEM turnbuckles.
I have it and it makes life soooo much easier. Glad you guys started making some for all the BX customers. Waiting list for them privately made is long. Great video Neil
Very nice! I wish they were available for other makes and brands of tractors. Not a fan of my current turnbuckles.
you guys ROCK! These bad boys are great!
These look a heck of a lot easier buy my concern is aren't the stock turnbuckles made to be the weak point? If I'm cruising along, hit a tough root, I would rather these break before my implement or something even more expensive on my tractor.
Great idea to make theses a dealer / parts accessory. Bought the Hodges version years ago but I know he doesn’t always offer them or maybe even stopped selling them on TBN. Worst part about the turnbuckles is they don’t stay open when you back into an implement. Wouldn’t be without mine.
Been hooking up 3 pt implements for 30+ years. Have a quick hitch now and wouldn't do without. Had to modify one older implement, but it was a once and done. For those looking at a quick hitch note that a hydraulic top link does make hook up easier. So in my case my tractor (MX6000) came with telescoping stabilizers and extendable arm ends that I will never use. I would rather have had side mirrors and a right hand outside door handle included. Some manufactures standard equipment combinations don't make sense to me.
These look really nice, and a great improvement in ease of adjustment. That being said, I put a quick hitch on my BX, so once I got them adjusted, I'll never adjust them again. They can rust in place. I know the next question will be, what if your implement doesn't work with your quick hitch? I'll modify the implement so that it does. It is well worth the trouble.
Great idea as turnbuckles are a pain when they get older. I was surprised by one of your comments below that you are only doing them for Kubota. I thought you might do it for your New Holland brand. By the way, I did appreciate your response on my question with tractor time with Tim in regards to the similarities between New Holland and the LS brand. I guess you're waiting for Tim and Christy to get that orange machine videoed more! Lol lol seriously, they bought a really good model in your Kubota line and I am curious on how they are going to use your custom power beyond accessory.
This is the first we've ever done something like this. If it works with this model, we may try other models.
Jim, is your NH one of the models made by LS? If it is you can probably get a set to fit your tractor from LS if NH doesn't offer them. My LS MT2 25E came standard with them, so it might be worth checking into. If not then maybe these made for Messick's will work, they look top notch and the price is more than fair. Either way, best of luck.
The pto bottom plate needed to be turned upside down in my case so that the pto wouldn’t catch and hit on it while spinning. Just FYI if you have that problem remove the pin and cotter pin that holds that plate and turn it so that the long side of the plate is on the bottom and reinsert the pin and cotter pin. Would have been nice to include this in installation instructions.
Just ordered...looks great...got a Kubota hat while I was ordering as well!
That caliper style adjustment honestly surprised me. Great idea for more adjustment nuance than 2 inches between holes. Only issue is don't the nice ones on bigger tractors give you a solid and a move space for attachments that need a little sway?
I have a pair installed. You will have to flip over the flap piece upside down to allow your pto female of your implement that slides on the tractor pto shaft not to hit when you lift up on the implement.
I work in shipping @ Messick's and we are selling these like crazy!
Do you ship to Australia?
Nice work, Neil. But if you painted them green you could charge $399 for them. 😂
Haha 😆 well said.
That green paint ain't cheap
You could sell double the amount actually I would buy them for my 2025r these are sweet!!!
Just ordered a set. Good timing Neal! My turnbuckles are bent and have always been a pain to tighten
Enjoy!
Neil, I assume this won’t be a surprise but they also fit my GC-1705. I bought it assuming the geometry would be close enough and it fits perfectly. Great upgrade!
Awesome. Good to know.
Just ordered. Plus I got a clock too! Feel free to put a Messicks hat in the box! Lol!
Mine just got delivered, I've broken both OEM turnbuckles and the ones on now are bent.
These look great and I appreciate the work, effort and local manufacturing that went into them. I have two questions. Am I the only one who has no trouble with the turnbuckles? And, the way the holes are, it seems there would be some slack and sway in the implements since you can't really tighten them like the turnbuckles.
Maybe you can work on a kit for a MX6000C backhoe next.
I use a 19mm ratcheting wrench with a slot in it that I purchased on line for under $30. That way there is zero movement when I use my rototiller
Have these on my B2301 and love them compared to the turnbuckles I had on the BX1880!
Great video's. I assemble Kubotas for West Coast. Washers and a chain from pin to pin on those sway bars to make it legit.
That was the best change I made on my B7300
"surprisingly complicated" = im charging alot for them...I have to get me a pair!!
Installing mine today. Thanks. Nice product
OMG! TAKE MY MONEY! I was using my rear-mounted blower just last week and thinking I cant believe Kubota implemented such a crappy solution.
Great idea. Ordered mine today!!!!!!
I like the convenience and quick adjustability of this style but I prefer the turnbuckle style myself. The quality does look great though.
All of my turnbuckle style have been ruined in one way or another. Very interested to try these out.
There's always a crazy one in every crowd 😂
Turn buckles take too long especially when you’re trying to get a job done
Looks like a great product at a reasonable price point!
The turnbuckle has an infinite positioning for nice tight hold. Have you ever found yourself with the hole just a little bit off? Not tight enough so that it slops around?
These bars are awesome but the pins could definitely be better. I replaced mine with some push pins that can easily be removed when changing the attachments. I think you should really considering changing them. Other than that, these are fantastic!
I ADDED THIS UPGRADE TO MY KUBOTA BX23S in April 2021.
Hey Neil, your vids a great and I like this upgrade!! Are they available in Canada? “Economy Tractors”? LOL
Yes, we can ship to Canada
Just got mine today thank you
Thanks for your business
nice idea, but how about a suspension seat upgrade? would love that...
nice addition....not required for my MX
very nice Neil! now can I get you to make some for Yanmar tractors too? Specifically the YT-235!
Neil I was wondering if I could get the most compressed pinned length from center to center on the mounting holes, and the most extended pinned length. I was hoping to adapt your nice stabilizers to my tractor.
Nice, on order before the vid finished
Thank you and FINALLY!!!
What i need is a how-to video on the three point hitch kit. I got a cardboard box full of parts from my dealer and a parts list. The paper in it was destroyed by a mouse so i have no idea how to assemble the kit. The parts are all sitting in a 5 gallon pail and no idea how they are supposed to be assembled. Kinda turning me off Kubota seeing this kind of thing. But i have all winter to figure it out before i need it for my rototiller.
Search the channel. I've done that.
These look well made, but not something I really need.
I put a quick hitch on my BX years ago, so no need to readjust my stabilizers when changing attachments.
How compatible is your quick hitch? I'm on the fence about buying one right now for my BX. The implements/attachments I am getting are Kubota/Landpride brand.
Very nice. Now how about a hydraulic thumb kit for a BH 77? 🤔
Yea, if it exsists probably just a measly 3000.oo$
My 2005 old blue came with this option. Now I'm dreaming of the ultimate hook-up. Hydraulic Top Link and Hydraulic Spread / Close Between the 2 Lower links. SDH the Great Unknown in CT
I just bought some from my dealer in Illinois. I hope they are the same.
Also Neil could u do a video on the new RTv520 have just ordered one and don't have much info on them
Neil you need to mention the longest and shortest length these have at the attachment pin holes please. I have another sub compact brand tractor and want to buy these for it.
I hear they fit Massey's okay. I know its impossible on a Deere.
@@MessicksEquip thanks
Hi Neil
I enjoy all your videos. Concerning telescopic stabilizers. Not sure who makes this product but a while back I bought a set of Hodge Stabilizers (they look very similar to the ones shown in your video) only to discover that the squared-off ends interfered with a few of my implements, specifically my LandPride landscape rake and my Salsco chipper. I tried to file off there corners of the stabilizer bar ends but was unable to remove enough material without compromising structural integrity. Of course, having modified them, I couldn't return them so off they went to the scrap yard. I called Mr Hodge to explain my problem and was told that I wasn't the first person to have interference problems. Just wondering if you tried using these with a variety of implements? Thanks for reading.
We've not bumped into that yet, but can't promise it may not come up.
Great video. Very useful accessory. Will it fit other brands of subcompact tractors? Such as the Massey Ferguson GC1700 series?
We do not know, but there is another Massy owner here in the comments that said that it fit for them.
I could've had a BX. And with this I should've.
Nice kit. Not expensive for what you are getting. Any in the pipeline for "other" SCUTs? Paticularly those that turnbuckle the 3 point hitch from the outside? LOL! Thanks for sharing!
Looks good. Real handy.
Nice! Just ordered them.
Please get a set together for the BX 2680 as soon as you can !!
these fit.
@@MessicksEquip Weird. I called in around 2 Pm EST and your parts rep wasn't sure so he went to someone higher up the chain. Came back in 4 minutes and said sorry they do not fit. But said if acceptance is strong they would likely get to that model in time. Added that if it wasn't on the web site list it does not fit. Thanks for your great videos
Love it any idea if this will fit other brands such as a gc1725
Just broke mine after 15 yrs of use….sheared the bolt that attaches to arm….got carried away ripping out an area with lots o large granite….
Have those on the L3430, cannot imagine playing around with those stupid turn buckles! Especially when your adjusting a 600lb brush hog!!
Great video, great idea
Hey messicks, what do you think about the new kubota 5 series excavators and 3 series svl’s, and when you think we’ll see them here. They are already out across the pond. Very curious if they updated the cab filtration on both as they are kind of a joke.
Will tell you shortly, they should start arriving soon
a set for a MX4800 would be friggin' awesome.........
It's a factory option from Kubota
Neil -- I ***NEED*** these for my B-Series 3200 -- you guys are making them now for the BX series and the L-Series but not the B. I'm stuck using the turnbuckles and it's driving me nuts with my field mower constantly rattling the turnbuckles loose while mowing pasture. HELP!
easy. the ones off the LX3310 should fit. Can just order from parts.
I'd be happy to test this this spring on our channel if you want to send me a set ;-) I'm still a little concerned with my tiller as it needs to be fairly tightly centered to keep the u-joint chatter down when fully raised. Best Regards, Jason Huser
Buy a set
$75 shipping to Canada. Could not justify that shipping cost. Hopefully you can partner with a Canadian distributor.
Nice 👍🏻 looks like a good quality part
Neil. These available at a dealer in Canada? I’d like a set shipped to BC and wondering what the best option would be?
You can order them on our website, we shipped to Canada.
messicks.com/part/k2561-38300fr/telescopic-stabilizer-kit-kubota-bx-series
@@MessicksEquip
Thanks Neil!